SUNLU PETG 2.0 DCUS-PETG+2.0-BK+BK+BK+BK-1KG*4 3D Printer Filament, Black, 4 kg

SUNLU PETG 2.0 combines a 1.75 mm filament format with enhanced toughness, giving functional prints such as brackets, hooks, and connectors extra resistance to impact and everyday use. Its lower moisture content is designed to help reduce common print issues like stringing and bubbles, supporting cleaner-looking results.

This black four-spool set provides 4 kg of PETG for a range of practical projects, from storage racks to gardening accessories.

How to use it

Load the 1.75 mm filament into a compatible 3D printer and use the recommended temperature range as a starting point for your print settings. SUNLU recommends a nozzle temperature of 240–270°C, a bed temperature of 70–80°C, and a print speed of 100–200 mm/s. These settings give you a practical baseline for printing everyday functional parts, adjust them to suit your printer and the specific model being printed.

For a project such as a tablet stand or a set of connectors, PETG 2.0 offers a material choice focused on toughness and load-bearing capacity. Its black color also gives finished parts a consistent appearance across prints.

Technical overview

• Material: Polyethylene terephthalate glycol (PETG)
• Color: Black
• Filament diameter: 1.75 mm
• Pack: 4 spools, 1 kg each, 4 kg total
• Diameter accuracy: ±0.02 mm
• Impact strength: Up to 5.196 kJ/m², stated as 50% higher than standard PETG filament
• Recommended nozzle temperature: 240–270°C
• Recommended bed temperature: 70–80°C
• Recommended print speed: 100–200 mm/s
• Spool dimensions: 195 mm diameter, 57 mm width, 63 mm hub hole diameter

Benefits

The upgraded PETG formulation is described as tougher and stronger than standard PETG, with higher impact strength and load-bearing capacity. That makes it suited to prints intended for regular handling, such as hooks, brackets, storage racks, and tablet stands. For outdoor accessories and gardening tools, the material’s stated resistance to moisture and daily wear supports its use in practical, everyday applications.

Lower moisture content is intended to help limit stringing, bubbles, and poor layer adhesion. The filament is also neatly wound, while the stated ±0.02 mm diameter accuracy provides a consistent filament size for printing. Compared with choosing standard PETG for general-purpose projects, this upgraded version is aimed at users prioritizing tougher functional parts. The reusable spools are designed to reduce waste.

Questions before you buy

What print settings does SUNLU recommend? Use a nozzle temperature of 240–270°C, a bed temperature of 70–80°C, and a print speed of 100–200 mm/s as the manufacturer’s recommended starting settings.

What kinds of parts is PETG 2.0 intended for? Suggested applications include storage racks, tablet stands, hooks, brackets, connectors, gardening tools, and outdoor accessories—useful projects where toughness and everyday durability matter.

How much filament is in the pack? The set contains four 1 kg spools, for 4 kg total. Each spool measures 195 mm in diameter and 57 mm wide, with a 63 mm hub hole.

When it makes sense

Choose this SUNLU PETG 2.0 set when your printing plans center on functional parts that need toughness for everyday use, rather than purely decorative models. Four black spools provide a practical supply for projects ranging from household organizers to brackets and outdoor accessories, with recommended settings and spool dimensions available to plan your print setup.