SPTA SQMIX65 buffing polishing pads kit

Get clearer, more consistent paint correction with a buffing and polishing pad kit that matches your workflow. The SPTA SQMIX65 set includes five foam pads in different cutting levels, so you can shift from heavy defect removal to fine finishing without changing your whole setup. If you’re working with a 6 inch 150 mm backing plate, the kit’s dual sided design also aims to help protect the paint surface while you polish ✅.

Using the right foam density and cut level can make a big difference. Heavy-cut pads help tackle sanding disc marks, deep scratches, overspray, orange peel, and oxidation, while the finer pads support swirl-free polishing and a glossy look. You also get washable, reusable pads, and the kit is designed to help the pad lock in polishing compound during faster work.

Key features

This kit is built around a simple idea, use the pad cut level that matches the condition of your paint. Each foam pad is labeled by its cut performance, from a heavy-cut option for faster correction through to ultra-fine finishing. The foam approach helps you correct while keeping the process controllable, especially when you are balancing removal and finish quality.

A standout detail is the pad face sizing that’s meant to reduce scratching risk. The front face is 6.5 inch 165 mm, and the back face is 6 inch 150 mm, a specific design to protect the surface during polishing. It also helps reduce abrasion for the pad itself, for the backing plate, and for the surface you’re working on.

Another practical advantage is compatibility with compounds. The kit is described as having wider compatibility across most compound types compared with other pad shapes like honeycomb, waffle, or diamond patterns. That matters when you want fewer trial-and-error moments, particularly if you use more than one polishing compound in your routine.

You also get a pad set focused on day to day shop use. The foam pads are described as bendable, washable, and reusable, making them easier to maintain between sessions. They are also designed with heat dissipation capacity, which can support more stable results during longer polishing work.

What to know

For best results, treat the pad like a system, match your pad cut level to your sanding or paint defect stage. If your surface still shows sanding disc marks or more noticeable oxidation, start with a heavier cut foam pad, then step down gradually. When the goal shifts to refining gloss and reducing micro marring, move to medium and then ultra-fine finishing.

Consider your tool type as well. The descriptions call out suitability for rotary, DA, and GA car polishers across different cut levels, so you have flexibility depending on what you already own. There’s also guidance on compound pairing, including heavy cut compound for heavy-cut pads and finish polishing compound for the ultra-fine pad.

Also keep in mind that pad results depend on technique and how you work the foam. Tenacity and finish quality will vary based on your polish selection, your speed, pressure, and the condition of the paint. That means you should test on a small area first, then adjust before committing to the full panel.

Do you want a simple way to cover multiple stages? This set is a straightforward option because it includes heavy-cut, high-cut, moderate-cut, medium-cut, and ultra-fine pads in one kit. Instead of buying separate pads later, you can build a complete progression for compounding, polishing, and waxing style finishing steps.

Tech specs

• Name: Buffing Polishing Pads Kit
• Brand: SPTA
• Total pads: 5 pcs
• Face size front: 6.5 inch 165 mm
• Face size back: 6 inch 150 mm
• Foam pad cuts included: T120, T80, T60, T40, T10
• Intended uses: compounding, polishing, waxing, and sealing glaze

Technical details

Each pad in the kit is described for a specific correction and refinement job, based on how much cut it provides. The T120 green heavy-cut foam pad is positioned for removing 1200 and 1500 sanding disc marks, deep scratches, overspray, orange peel, and heavy oxidation. That pad can support aggressive correction when the paint needs more than light refinement.

The T80 yellow high-cut foam pad is described as intensive cutting and swirl free polishing, targeting 1500 and 2000 sanding disc marks along with swirl marks and heavy to medium oxidation. For mid stage work, the blue T60 moderate-cut foam pads are described as removing 1500 and 2000 sanding disc marks and medium oxidation, supporting multiple machine types like RO, DA, and GA.

As you work toward a cleaner finish, the T40 orange medium-cut foam pad is described as a lighter cutting option for 2000 sanding disc marks, fine scratches, and light oxidation. Finally, the red T10 ultra-fine finishing foam pad is described as swirl-free with a gloss finish and focus on car wash scratches and ultra-fine swirl marks.

Because the set covers heavy to ultra-fine, it supports a step down process that helps reduce the jump between radically different finishes. It also emphasizes a compound holding design intended to lock and remain polishing compound during high speed work, which can help reduce mess and improve consistency. The pads are washable and reusable, so you can keep them in rotation as you refine your workflow.