SOMADA 3/4-Inch x 6-Inch Wood Auger Drill Bit 📦

This SOMADA 3/4-Inch x 6-Inch Auger Drill Bit for Wood is built for coaxing clean, straight holes in soft and hard woods, plywood, and composite materials with a sturdy 3/8-inch hex shank for quick changes. Designed around a solid central core, it provides extra rigidity during boring and features a thick screw-tip to start cutting with ease. The single-flute cutting edge carves the circle of the hole for a smoother finish, while the hollow-centers flutes help evacuate chips quickly for less resistance during use.

The combination of these features supports accurate drilling on projects ranging from fence posts and shelves to decorative tree stumps and pergola construction. This bit is suitable for deep holes up to several inches, and it performs well in a variety of woods and engineered panels. For labor that benefits from stable, one-piece construction, the bit's geometry is intended to reduce wandering and improve control during boring.

Key Points

SOMADA 3/4-Inch x 6-Inch Auger Drill Bit for Wood is designed to deliver steady performance in both soft and hard wood, as well as plywood and MDF. The hex shank allows fast, tool-free changes on compatible drill presses or hand drills, while the thick screw tip is meant to start the cut smoothly and guide the bit into the workpiece. Expect clean edges and reduced breakout thanks to the single-spoon cutting edge that defines the hole circumference. The cutting flute is milled with hollow centers to speed up chip removal, which helps maintain cutting efficiency across longer bores.

For reliable results, use steady feeds and maintain pressure to keep the bit engaged with the material. The bit is particularly helpful for pocketing, joinery projects, and installing floating shelves where clean holes matter. It’s a practical option when working with a mix of softwoods, hardwoods, and laminated panels, providing consistent performance across a range of wood densities.

🔧🪚

Technical Specifications

• Name: SOMADA 3/4-Inch x 6-Inch Auger Drill Bit for Wood
• Shank: 3/8-inch hex
• Material: Carbon steel
• Application: Wood, plywood, MDF, hard and soft wood, composite materials
• Cutting features: Thick screw-tip, single-flute cutting edge, hollow-centers flutes
• Depth capability: Drills holes up to approximately 6 inches long
• Finish: Standard industrial coating designed for general-use drilling
• Country of origin: United States

Usage Recommendations

This bit excels when used with standard drills or drill presses that accept a 3/8-inch hex shank. Start the hole at a low speed and apply steady pressure to maintain a clean entry and reduce wandering. For longer bores, back off slightly to clear chips and prevent clogging from buildup. If you’re working with dense hardwoods, consider lubricating the bit lightly to minimize heat and prolong sharpness 🪵. In projects involving multiple holes, the hex shank helps with rapid bit swaps, keeping your workflow smooth and efficient 🛠️.