SHASKOKOEN Wire-Reinforced PVC Hose, 0.984-Inch ID, 1.26-Inch OD, 9.84 ft
Product description
At 9.84 feet long, this clear PVC hose has a 0.984-inch inside diameter and a 1.26-inch outside diameter, with steel-wire reinforcement. Its stated design addresses both suction and discharge, where a hose that resists collapsing can matter more than choosing a basic, unreinforced tube.
It’s intended for a range of fluid-handling tasks, including garden sprinklers, hydraulic return lines, and fuel-hose cleaning applications. The listed uses are broad, so match the hose to the fluid and requirements of your specific setup rather than treating them as universal compatibility claims.
Practical tips
Start with the measurements: the inside diameter is the dimension that needs to match the fitting or connection, while the outside diameter helps establish clearance in a tight installation. The product name also gives a 1-inch nominal size, but lists the actual inside diameter as 0.984 inch. Use the stated dimensions when checking fit.
For a suction-side setup, the steel-wire reinforcement is the relevant feature: the hose is described as resistant to negative pressure and less prone to collapsing during suction. It is also flexible enough for routing, and is described for discharge use as well. For example, it could suit a garden-sprinkler arrangement that needs a clear hose between a water source and the equipment, provided the dimensions and operating requirements match.
You’ll appreciate it if you need a transparent, reinforced hose for suction or discharge and its fixed length and diameters suit your layout. It may not suit you if your connections require a different inside or outside diameter, or if the run needs a different length.
Tech specs
- Material: Polyvinyl chloride (PVC)
- Reinforcement: Steel wire
- Color: Clear
- Inside diameter: 0.984 inch (1-inch nominal size)
- Outside diameter: 1.26 inches
- Length: 9.84 feet
- Maximum working pressure: 75 psi
- Burst pressure: 220 psi
- Temperature range: 25°F to 150°F
What you’ll notice day to day
The clear construction lets you see the hose interior, while the wire reinforcement is intended to help it hold its shape under suction. That combination gives it a different role from a simpler, unreinforced tube: it is aimed at jobs where suction resistance is useful as well as ordinary discharge. Its stated working-pressure figure is 75 psi, the separate 220 psi figure is the burst pressure, not the listed working limit. Keep those figures distinct when comparing it with a hose for a pressure-dependent setup.
The hose is presented for several applications, but the listing does not specify which fluids are compatible in every operating condition. If you plan to use it with fuel or another particular fluid, verify suitability for that fluid and your equipment before installation. The product details also do not specify fittings or connectors, so the dimensions alone should not be taken as confirmation that it will attach directly to a given system.
Final verdict
This SHASKOKOEN hose is worth considering when the clear PVC construction, steel-wire reinforcement, and listed dimensions line up with a suction or discharge task. Its appeal is more specific than that of a basic tube: the reinforcement is intended to resist collapse under suction, while the stated working pressure gives a separate reference for discharge use. Choose it based on the actual inside and outside diameters, length, fluid, and operating conditions—not on the broad application list alone.