PUREPLUS 10" x 2.5" 5 Micron Sediment Filter cartridge

This 10-inch whole house sediment filter cartridge from PUREPLUS removes visible particles like rust, sand and dirt as the first line of defense for point-of-entry and RO systems, helping appliances and taps run cleaner and clearer. It uses a dense, multilayer polypropylene structure with an absolute 5 micron inner layer to trap fine sediment while the outer layers capture larger particles, making it a practical replacement for common models in household filtration setups.

Key Points

The cartridge is designed for general tap water filtration and fits standard 10" x 2.5" housings used in many RO and whole-house systems. According to the manufacturer, its triple-layer PP construction extends life by about 30% compared with conventional single-layer sediment cartridges. Consider that if your water comes from a well with very high particulate load, performance may be reduced and more frequent changes could be necessary. 🧰

Technical Specifications

• Name: PUREPLUS 5 Micron 10" x 2.5" Whole House Sediment Filter Cartridge
• Filtration rating: 5 micron absolute (inner layer), 7 micron nominal (middle), 10 micron nominal (outer)
• Size: 10 inch x 2.5 inch
• Material: Food-safe polypropylene, BPA free
• Estimated capacity: up to 13,000 gallons according to the manufacturer
• Recommended replacement: every 3-6 months depending on water quality and household use

Benefits

This replacement cartridge protects downstream filters, reverse osmosis membranes and plumbing fixtures by removing abrasive and visible particulates before they cause wear or clogging. The layered design balances capture efficiency with flow, helping maintain water pressure better than some tight single-layer elements. The food-safe PP material meets several regulatory standards acknowledged by the manufacturer, and the BPA-free construction reduces concern about plastic contaminants in contact with potable water. 💧

Usage Recommendations

Install the cartridge in any compatible 10" x 2.5" filter housing, making sure to flush the element briefly after initial installation to remove any residual fibers. Replace according to the indicated interval or sooner if you notice reduced flow or increased discoloration in the filtered water. Keep a spare on hand if your incoming water varies seasonally or carries visible rust after heavy rain. 🔧

Technical Details

• Compatible replacements: Culligan P5, Aqua-Pure AP110, Dupont WFPFC5002, CFS10, WHKF-G05
• Pack: 4 cartridges per set.