Pickguard Sheet 3-Ply

If you want a ready-to-install replacement, a pre-cut pickguard is the simpler route. This uncut black 3-ply pickguard sheet is for a different kind of project: tracing a shape, cutting it out, and tailoring the result to a guitar or bass. Its 11.4" x 16.9" surface gives you room to work on custom guards or backplates, but the final fit and finish depend on your template and cutting work. The front has a protective film to help keep the surface clean while you handle and shape it.

Technical details

This sheet is black, uses a 3-ply PVC construction, and measures approximately 11.4" x 16.9" x 0.09". Thickness can vary by ±0.2mm between batches, so account for that when planning a close-fitting project. The material is supplied uncut, with one sheet per package. There are no tools or hardware included.

The main benefit is flexibility: rather than choosing a fixed outline, you can trace a template and make a replacement or a look that suits your instrument. The listed sheet area can provide material for two pickguards for ST or TL guitars or a J Bass, or one full pickguard for P Bass pickups. Treat those as project estimates, not a promise that every template will fit, the shape and layout you choose matter.

Compatibility & requirements

The product is described for custom guitar and bass projects, including ST, TL, Jazz, and Precision-style applications. Since the sheet arrives blank, it is not a drop-in replacement for any of them. You will need a suitable outline and the means to cut and shape the material. For a repair, tracing the existing guard is a practical way to preserve its perimeter and screw-hole positions, for a new design, plan the layout before cutting.

It makes sense if you want to customize the outline, replace a worn guard, or make a matching backplate from sheet material. Not the best choice if you need a finished part that can be installed straight out of the package.

Usage tips

Keep the protective film on while marking and shaping the sheet, then peel it away when the work is done. A practical workflow is to place your template on the blank, check that the whole outline fits, and mark the cut before removing material. That gives you a chance to catch a cramped layout before it becomes permanent. The listing does not specify included cutting tools, so plan to supply your own equipment and allow time for careful finishing.

For a close replacement, use the original pickguard as a reference rather than relying on the instrument name alone. A custom shape may call for a different layout, and this blank will not establish screw locations or pickup openings for you. Without having tried it, those hands-on details are best treated as part of the project rather than as a guaranteed fit.

Before you decide

Does the package include a finished pickguard? No. It contains one uncut sheet of material, ready for tracing, cutting, and shaping.

Is the protective film meant to stay on? It protects the front during handling and installation work, peel it off before the finished part is used.

Can one sheet make more than one guard? The listed area is intended to allow two guards for ST or TL guitars or a J Bass, or one full P Bass pickup pickguard. Your template and layout determine what you can actually cut from it.

Is it worth it?

This sheet is a sensible buy when the point is hands-on customization: you get a sizable black 3-ply blank and can decide the outline instead of settling for a pre-cut shape. It also suits repair work when you can trace the part being replaced. The trade-off is real: cutting, shaping, and achieving the final fit are your responsibility, and the package supplies no tools or hardware. Choose it for a DIY build or replacement project, skip it if you need a ready-to-mount guard with the holes and cutouts already finished.