Nilight TR-05 2PCS 60-Inch 180-LED Bed Strip Kit with Waterproof On/Off Switch & Splitter
Product description
What it is (and why people buy it)
Nilight’s TR-05 bed strip kit is a pair of LED light strips made for vehicle “utility lighting” — think truck bed visibility, side areas you don’t normally reach, and general illumination when you’re loading, unloading, or working after dark. The pitch here is pretty straightforward: bright white LEDs, quick installation with peel-and-stick, and a wiring setup that includes a 2-way splitter, inline blade fuses, and a waterproof on/off switch.
On paper, it’s the kind of kit you’d choose when you want a visible upgrade without doing a full custom lighting build. It’s not trying to be a precision automotive lighting system with a complex controller, it’s more of a practical add-on.
Key takeaways before you decide
The most compelling part is the combination of brightness, sealing, and convenience. The strips use 5050-SMD LED chips (180 LEDs per kit as described), and they’re rated as IP67 sealed housing, which is meant to help resist raindrops, dirt, and sand. If you spend time in messy weather or haul gear often, that sealed design matters more than you might think.
For installation, the kit is described as peel-and-stick with an adhesive enhancer for stronger sticking (it’s stated as “5X strength” in the description). You can also add included mounting hardware if you want extra physical security on the surface.
One limitation to keep in mind: you’re still dealing with an adhesive-first approach. If your mounting surface is oily, dusty, or not cleaned properly beforehand, the “easy install” can turn into premature lifting.
What you’ll notice in real use
If you’ve ever fumbled around in a truck bed with a phone flashlight, you’ll get the point fast: these strips are intended to flood your bed area with a super bright white light (the description cites 2400 LLM and a 6000K color). In practice, that usually means better visibility for cargo, straps, tools, or anything you’re trying to place precisely.
A micro-scenario: say you’re loading a couple of boxes after sunset. With the bed lights on, you can see edges, corners, and whether the cargo is fully seated—rather than relying on intermittent flashlight beams. It’s a small change, but it reduces the “guessing” step.
Also, the included waterproof on/off switch and wiring parts (2-way splitter, inline blade fuses, and extension cable) suggest the kit is designed to be installed neatly, with circuit safety in mind.
Wiring & durability: where this kit feels thought through
This kit is built around an easy electrical hookup: it includes the on/off switch and wiring components so you’re not starting from scratch with fuses or a basic split connection. The presence of inline blade fuses is a practical safety detail, not just decoration.
Durability-wise, IP67 sealed housing is the big headline. Sealed strips generally hold up better when exposed to weather and road grime, and the description also mentions flexibility and a lifespan claim (up to 30,000 hours). Claims like that should be taken as a best-case estimate, but it does indicate the intent is long-term use.
If you care about keeping water and debris out of the strip, this is one of the more reassuring parts of the package.
Coverage & fit: where it makes sense vs. where it may not
The product description lists broad use cases: truck bed light, RV awning lighting, step bar LED lighting, and side door lighting, among others. That broad compatibility is useful if you’re flexible with mounting locations.
It may not suit you as well if: - You’re looking for a high-end “factory-style” look with refined light diffusion and custom fitment. - You want a deeply integrated lighting system controlled through vehicle settings. - Your mounting area can’t be cleaned and prepped properly for adhesive bonding.
It’s a solid pick if you want an add-on kit that’s bright, sealed for harsh conditions, and comes with the wiring basics already included.
Tech specs
- LED chips: 5050-SMD LED chips
- LED count: 180 LEDs
- Length: 60 inch
- Brightness output (as stated): 2400 LLM
- Color temperature (as stated): 6000K super bright white light
- Housing rating: IP67 sealed housing
- Waterproof control: waterproof on/off switch (as described)
- Electrical parts included (as described): 2-way splitter, inline blade fuses, extension cable
- Warranty: 2 years
Is it worth it?
Buy it if you want a practical bed strip lighting upgrade with a sealed, weather-resistant design and a wiring kit that includes an on/off switch, fuses, and a 2-way splitter. It’s aimed at people who want to improve nighttime visibility around the truck bed (or similar mounting areas) without turning the job into a full fabrication project.
Skip it if you need ultra-precise fitment or a more integrated lighting experience, or if you can’t realistically prepare the mounting surface for adhesive installation. The biggest “watch-out” is adhesion: peel-and-stick works great when the surface is clean and stable, and it can disappoint when prep is rushed.
A quick checklist before buying: confirm the mounting location is suitable for a 60-inch strip, plan where the waterproof switch will live, and make sure you’ll route and secure the wiring so it stays protected.
FAQ
FAQ
How many strips come in the kit?
The kit is listed as 2PCS.
Is the switch waterproof?
Yes—your description specifies a waterproof on/off switch.
What’s the intended benefit of the IP67 housing?
It’s meant to help protect the strip from raindrops, dirt, and sand exposure.
Do I need special tools to install it?
The description emphasizes quick installation using peel-and-stick adhesive, and it also mentions included mounting hardware if you want extra security.
What vehicles is it for?
The description lists cargo, pickup truck, SUV, RV, and boat applications, plus other lighting uses like awnings and side door areas.