Logiim 130-Piece PCL 3D Pen Filament, 26 Colors, 2.5 mm
Reviews
Price
Product description
Create colorful 3D pen drawings and small models with a ready-to-load assortment of PCL filament. This Logiim set includes 130 pre-cut strands in 26 colors, sized for compatibility with the 3Doodler Start+ and designed for low-temperature use.
With five strands per color, it’s easy to switch shades as a project takes shape. The pre-cut format also means each piece can go straight into the pen without trimming.

What to know


The filament is made from polycaprolactone (PCL) and has a 2.5 mm diameter. It is intended for low-temperature 3D pens, including the 3Doodler Start+. The product information gives 158°F (70°C) as the standard low operating temperature to begin with, follow your pen’s operating directions when loading and using filament.

Each strand is pre-cut to 6 inches (15 cm), making it convenient to handle and reload during a craft session. The material is described as odor-free and non-toxic, and the set’s range of colors supports everything from simple outlines to designs with several colored sections. Buyers also highlight the color selection, compatibility with their 3D pens, and the fun of using the strands for creative projects.
Quick sizing guide



The 2.5 mm diameter is the key fit detail for choosing this refill. Check that your 3D pen uses 2.5 mm filament, the listed compatible model is the 3Doodler Start+. Each of the 130 pieces measures 6 inches (15 cm), with five strands in each of the 26 colors. The listed total filament length is 1,950 cm.
For a project that changes color often, the short pre-cut pieces are ready to load as needed. The resealable bags provide a way to store each color between sessions. Compared with buying single-color refills one at a time, this assortment puts a broad palette in one set, which is useful for projects where color variety matters.

Getting the most from it


Keep the strands organized by color so the next shade is easy to find while drawing or building. Start the pen at its standard low operating temperature, and feed in a pre-cut strand according to the pen’s instructions. Having several colors on hand makes it practical to add details, accents, or contrasting sections without stopping to cut filament.

At home, a project might begin with a simple outline and grow into a small multicolor model as different strands are loaded. The ready-to-use lengths make this format approachable for hands-on crafting and creative activities, including STEAM projects. Product information estimates enough material for more than 160 mini models and projects, depending on how each one is made.
When it makes sense

Choose this set when your 3D pen uses 2.5 mm low-temperature filament and you want multiple colors in ready-to-load pieces. Its 26-color mix suits creative work that benefits from frequent color changes, while the five strands per color give you several pieces of each shade to work with. For 3D pen drawing, small models, and color-led craft projects, the combination of pre-cut PCL strands and a wide palette keeps materials organized and ready for the next idea.
Products with discounts that might interest you
- Colourbing Glow in the Dark PLA+ Filament, 1.75mm, Blue Purple, 1kg Spool
- Comgrow Blue & Purple &Yellow Silk PLA 3D Printer Filament, 1.75 mm Tri-Color
- DEEPLEE DP-PM052 Matte PLA 3D Printer Filament, 1.75mm, Orange 2-Pack
- Dynta Silk PLA Filament Bundle, 6 × 250g Dual-Color Spools, 1.75mm
- E-Z Ink DR820 Compatible Drum Unit 2-Pack, 30,000-Page Yield per Unit
- ECO-WORTHY Cubix100 ECO-LFP4810002 48V LiFePO4 Rack Battery, 200Ah
- Energizer Ultimate Lithium AA Batteries (24-Pack) – Long-Lasting 1.5V Power for High-Drain Devices
- Eversimpleinc S206B Black Outdoor Splitter Extension Cord, 4 Covered Outlets
- Fikwot FX815 256GB 2.5-Inch SATA SSD with 3D NAND
- FLASHFORGE RRUS Rapid PLA Filament, Ruby Red, 1.75mm, High-Speed Printing
- FNIRSI LPM-10A Network Cable Tester Kit with PoE, Wiremap and Length Testing
- Frucindra PETG 3D Printer Filament, 1.75mm, 4 x 1kg Spools, Black
- Renogy Y Connector Pair for Solar Panels ⚡
- EBL 9V Batteries 8 Pack — Alkaline, Non-Rechargeable, 7-Year Shelf Life
- Energizer EL-PN-47321632 MAX AA Alkaline Batteries, 20-Pack
- Samsung SSD 9100 PRO 2TB: PCIe 5.0 Performance for Gaming and Creation
- Renogy 30Amp Transfer Switch for RVs ⚡
- FLASHFORGE D-1 Galaxy Matte Black PLA Filament, 1.75mm, Silver Glitter, 1kg
- JARXIOKE 4000W Power Inverter: 12V DC to 110/120V AC for RV, Off-Grid, and Travel
- Renogy PUH 1000W Pure Sine Wave Inverter for RVs 🔌
- Meuymeu 16-Color PETG Filament Bundle, 1.75mm, 16 × 200g Spools
- FLASHFORGE DSK-BKRD Silk PLA 3D Printer Filament, Black and Red, 1.75 mm
- RayHom AA 1.5V 3700mWh,PJ-L1211 Rechargeable Lithium Batteries, 24-Pack
- VOLTWORKS 2000W Pure Sine Wave Inverter 12V to 120V ⚡

