Loggers Art Gens 16 inch-3/8-043-55-2pcs Chainsaw Chain, 16-Inch Semi-Chisel

If you need a replacement chain for a saw with a 16-inch bar, the key is matching the bar’s pitch, gauge, and drive-link count—not just its length. This Loggers Art Gens chain is listed with a 3/8-inch LP pitch, .043-inch gauge, and 55 drive links.

The chain is a semi-chisel design and is described as low-kickback. The package includes two chains, so it provides a spare for a compatible saw rather than a single replacement.

The listing names Stihl MS170, MS171, and MS180c models, along with Stihl, Ryobi, and Makita saws when their specifications match. Check your guide bar’s markings before choosing it, brand alone does not establish fit.

Practical tips

Use the bar’s specifications as your fit check. Confirm that it calls for a 16-inch chain with 3/8-inch LP pitch, .043-inch gauge, and 55 drive links. Those details determine whether the chain can match the bar and sprocket, while the model names in the listing are examples rather than a substitute for checking your saw.

This is a more specification-led purchase than choosing a chain based only on a familiar brand name. For example, someone replacing a chain on a listed Stihl model can compare the bar markings with the details here, someone with a different saw should make the same comparison before ordering. The product information also references Oregon 90PX055G, but the saw’s own bar specifications remain the practical fit check.

Buyers describe the chain as sharp, easy to mount, and capable of cutting well. Fit feedback is often positive, though reports about chain stability and length are mixed: some buyers say the chain does not fit as expected, including reports of it being too long or too short. These are buyer experiences, not a substitute for the stated dimensions, so matching the full specification matters.

Pros

The clearest advantage is that the key sizing details are spelled out: 16 inches, 3/8-inch LP pitch, .043-inch gauge, and 55 drive links. That makes it easier to compare against a worn chain or the guide bar’s specifications than a listing that gives length alone. The semi-chisel type and low-kickback description also help identify the intended chain style.

Two chains are included, which may suit someone who wants a spare on hand. Buyers also commonly mention sharpness and straightforward installation. Those comments may help set expectations, but they do not guarantee the same fit or cutting experience on every saw.

Key points

This is a replacement chain, not a guide bar or a complete chainsaw. Compatibility depends on the full set of measurements, even when a saw brand appears in the listing. The stated specifications are more useful than a broad claim of universal fit, particularly if your saw model or bar is not named.

The listing describes the chain as low-kickback and states compliance with ANSI B175.1-2012 and CSA Z62.3. Follow your chainsaw manufacturer’s operating and maintenance instructions, and use the chain only with a compatible setup. Because buyers report some variation in fit and length, confirm the bar’s required link count and dimensions before installing either chain.

Should you buy it?

It makes sense if your saw’s bar calls for these exact dimensions and you want two semi-chisel replacement chains in one package. The named Stihl models give a useful starting point, while the listed Ryobi and Makita compatibility still depends on matching specifications.

Not the best choice if you cannot confirm the pitch, gauge, and drive-link count, or if your bar requires a different chain size. The deciding factor is a match to your saw’s stated requirements, not the chain’s broad compatibility wording.