LET'S RESIN ELR08093 Resin Sander Accessory Kit, 2-Inch, 10 Grits

Choosing sanding supplies for detailed resin work is easier when the abrasive stages and polishing accessories are in one set. The LET'S RESIN ELR08093 kit brings together 2-inch sandpapers, a magnetic sanding disc, and two buffing pads for small resin projects.

Ten grit options take you from coarse shaping to fine polishing. That range helps you work through different finishing stages with the same compact setup.

Designed for the LET'S RESIN LRP-2393 4-in-1 resin sander, the kit is sized for small pieces such as jewelry, pendants, keychains, coasters, and mini figurines.

Tips for day-to-day use

Start with a coarse grit such as 60, 80, 100, or 180 when shaping an edge or removing resin flash and burrs. Move to 320 or 600 to smooth an uneven surface, then use the finer grits from 1,000 through 5,000 for polishing. Progressing through the grit range gives you options for each stage instead of relying on one abrasive for the whole task.

The 2-inch format is suited to focused work on narrow edges, small surfaces, and intricate details. For a pendant or keychain, that compact contact area can help you direct sanding where it is needed. The magnetic sanding disc attaches to the LRP-2393 sander, while the hook-and-loop sandpapers are designed for straightforward placement and replacement. The disc is a consumable part and can be replaced as needed.

What you’ll notice day to day

The set includes 200 sandpaper sheets: 20 each in grits 60, 80, 100, 180, 320, 600, 1,000, 1,500, 2,000, and 5,000. That spread suits projects that need more than basic shaping, including smoothing resin coasters and figurines before refining jewelry or epoxy art for a polished finish.

Two soft buffing pads provide a cushioned surface for finishing. Their flexible texture follows the contours of curved pieces, while the pads help distribute pressure across the work surface. This is useful when polishing a small pendant or figurine, where controlled contact matters across both edges and curved areas.

Key features

All components use a 2-inch size, keeping the kit focused on small resin work rather than broad surface sanding. The included sanding disc uses magnetic attachment and is made for the LRP-2393 4-in-1 sander, so check that your sander is this model before using the disc. The sandpapers are described as wear-resistant and tear-resistant for use on resin and epoxy materials.

Compared with sourcing abrasives and polishing pads separately, this kit groups a broad grit range and two buffing pads around one compact sanding setup. Its 60–180 grits support rough shaping and flash removal, 320–600 help smooth surfaces, and 1,000–5,000 are intended for fine polishing. This makes it practical to keep the next finishing step close at hand while working through a small craft piece.

Buying verdict

For resin crafters using the LET'S RESIN LRP-2393 sander, the ELR08093 accessory kit combines the matching magnetic disc with 200 sheets across ten grits and two soft buffing pads. It is especially suited to detailed projects such as resin jewelry, pendants, keychains, small decor, and mini figurines, where compact sanding and a progression from shaping to polishing help support a more controlled finishing workflow.