Lawn Mower Drive Wheel Set, 8-inch

If your mower needs all four wheels replaced, a matched set can be more practical than sourcing front and rear replacements separately. This kit includes two front wheels and two rear wheels, with compatibility listed across several Honda walk-behind mower families. The useful detail is the specific replacement-part list: matching those numbers to your mower matters more than relying on the series name alone. The wheels are plastic, and the listing gives an 8-inch diameter, 2-inch width, and 1/2-inch bore.

What matters most

This is a replacement set, not a universal fit. The listed families include HRR216, HRS216, HRT216, HRZ216, HRB215, HRB216, HRB217, and HRM215, with specific variants named for each. The rear wheels replace part numbers including 42710-VE2-M02ZE, while the front wheels replace numbers including 44710-VL0-L02ZB. Other replacement numbers are listed as well, so compare the number for the wheel position you need rather than assuming every mower in a family uses the same parts.

Keep in mind that the compatibility list is detailed but does not identify every mower by year. If your exact model or original part number is not listed, fit is uncertain. The set makes most sense when both front and rear wheels need attention, if only one wheel is worn, buying a full set may mean keeping usable spares.

How to use it

The supplied instructions describe removing the hex nut and old wheel, then sliding the replacement into place so it engages the drive mechanism. That makes this a straightforward repair conceptually, but the wheel still needs to match the correct front or rear position and your mower’s fitment. Before taking anything apart, compare the existing wheel and its part number with the replacement list. A mismatch can turn a simple swap into a parts-return problem.

Practical tips

Picture a mower that still starts but is harder to push or drive because its wheels are worn: replacing the matching wheels can address that part of the problem without replacing the whole machine. This kit gives you both front and rear pairs, rather than just a single replacement wheel. Its plastic construction and stated dimensions are useful checks against the wheels already on your mower, especially the 1/2-inch bore and the 2-inch width.

It suits you if the mower’s model and wheel part numbers line up with the listing and you want a complete front-and-rear set. You may want to skip it if you cannot confirm that match, or if you only need one wheel and would rather buy a position-specific replacement. The listing describes installation as easy, but it does not provide additional tools, maintenance guidance, or durability information.

Practical doubts

How many wheels are included? The package includes two front wheels and two rear wheels.

What are the stated dimensions? Each wheel is listed as 8 inches in diameter and 2 inches wide, with a 1/2-inch bore.

Which mower families are named? Compatibility is listed for selected Honda HRR216, HRS216, HRT216, HRZ216, HRB215, HRB216, HRB217, and HRM215 models. Check the exact variant and part number, not just the family name.

Is it worth it?

This set is worth considering when you have confirmed that your mower uses the listed front and rear replacements and want to handle all four wheels in one repair. The included model and part-number details make fitment the main buying decision, while the plastic construction and stated dimensions help with a physical comparison. If only one wheel needs replacing, or your mower’s exact variant is missing from the list, a smaller or more precisely matched replacement is the safer approach.