KEMIMOTO Tinted Polycarbonate Rear Windshield for Ranger XP 1000/900 and Crew
Product description
Getting the most from it
Made from 0.2-inch polycarbonate, this gray-tinted rear windshield adds a protective barrier to compatible UTVs. Its rear-facing design helps shield the driver and passengers from cold wind, rain, and dirt during outdoor rides. The tinted panel and black seal strip also give the vehicle a coordinated look alongside other accessories.

The window comes with rubber strips already installed. Position it at the rear and rotate the clamps to secure it—no tools or drilling are required. That straightforward setup makes it practical for riders who want a rear barrier they can install or remove as riding conditions change.


Benefits

On a windy trail or during a ride in unsettled weather, a rear windshield helps reduce exposure to the elements for everyone in the vehicle. Compared with riding with the rear opening uncovered, this panel provides a physical barrier while keeping the setup focused on the rear of the UTV. Its polycarbonate construction is intended for outdoor use, and the product description states that the material is 250 times stronger than glass.
The pre-installed rubber strips simplify placement, while the rotating clamps hold the window in position without drilling into the vehicle. For a clean appearance, the gray tint pairs with a black seal strip. To care for the panel, use a microfiber or non-woven cloth with water or a neutral cleaner made for polycarbonate. Avoid alcohol, acetone, gasoline, and other corrosive chemical cleaners, which can cause swelling or discoloration.



Key points
- Material: Polycarbonate (PC)
- Thickness: 0.2 inches
- Color: Gray-tinted window with black seal strip
- Installation: Pre-installed rubber strips, tool-free, no-drill clamp installation
- Compatible vehicles: 2017–2027 Polaris Ranger XP 1000/Crew, 2020–2027 Ranger 1000/Crew, 2013–2019 Ranger XP 900/Crew, 2015 Ranger Full Size 570/Crew, 2016 Ranger XP 570, 2020–2021 Polaris PRO XD 4000G/2000G/2000D AWD, and 2023 Ranger XP Kinetic

Questions before you buy


Which vehicles does this rear window fit? It is listed for the Polaris Ranger and PRO XD models and year ranges shown above. Match your vehicle’s model and year to that fitment list before installation.

Do I need tools or drilling to install it? No. The rubber strips are pre-installed, place the windshield in position and rotate the clamps to secure it.
How should I clean the polycarbonate panel? Use a microfiber or non-woven cloth with water or a neutral cleaner suitable for polycarbonate. Avoid alcohol, acetone, gasoline, and corrosive chemical cleaners to help prevent swelling or discoloration.

Buying verdict
For owners of the listed Ranger or PRO XD vehicles who want a rear barrier for outdoor rides, this KEMIMOTO window combines a tinted polycarbonate panel with a simple clamp-on installation. It helps keep wind, rain, and dirt from reaching the cabin area while adding a finished look at the back of the UTV.
Products with discounts that might interest you
- KEMIMOTO UTVB0110-02001 Rear Windshield, Clear Hard-Coated Polycarbonate
- AutoBull ABRB-6003 Running Boards for 2022–2026 Toyota Tundra CrewMax
- Bemaka H-135 Automotive Push Retainer Clip Kit, 151 Pieces with Removal Tool
- COMNOVA AUTOPART 15655H6-BLK-8-C Running Boards, 6-Inch Non-Slip Steps
- GOOACC 635pcs Push Retainer Clips Assortment
- JinnEterri 242PCS Car Bumper Retainer Clips Kit, 12 Sizes and 5 Removal Tools
- LASFIT XS-FD09D Tailgate Mat for Ford Ranger, TPE All-Weather Liner
- LivTee Chrome License Plate Frames, 2-Pack Stainless Steel, 4-Hole, Slim Design
- Mega Racer White License Plate Frame, Gloss White Stainless Steel, Slim Edge
- MICHELIN MLLCL026 Tailgate Protector for 2022–2026 Ford Maverick, TPE
- MTABCTY License Plate Frames, Black Stainless Steel 2-Pack with Screw Caps
- Nilight 240PCS Bumper Retainer Clips kit
- Starlink Mini Flat Magnetic Roof Mount, 220 lbs
- MICHELIN MLLCL042 Tacoma Tailgate Protector, Non-Slip TPE Mat
- Mega Racer MR-LFBL-2pc Matte Black Stainless Steel License Plate Frames, 2-Pack
- RV Awning Fabric Replacement (Glacier Blue) – 19.5oz Heavy-Duty Vinyl Seamless Canopy, DIY Install, UPF 50+
- CarTuned 1956 Chevy Nomad model kit
- Wigoo US-W-T-MYMF-01 Mud Flaps for Tesla Model Y, Thicker PP/TPE Set of 4
- QiqaMole QM-LPF Silicone License Plate Frames, Purple 2-Pack with Drainage Holes
- Mega Racer Amz-LIFN-2Pc License Plate Frames, Aluminum Carbon-Fiber Design
- StarknightMT Ranger XP 1000 Clear Polycarbonate Rear Windshield
- GOOACC 975-Piece Car Push Retainer Clips & Auto Fasteners Assortment
- 3W Truck Bed Mat for 2020-2026 Jeep Gladiator 5ft
- Fender Flares for Jeep Gladiator JT 2020-2024 🚙

