KEMIMOTO Motorcycle Cup Holder with Oxford Fabric Clamp (0.6–1.5 in pole)
Product description
The essentials (what it is and what it solves)
If you like riding with a drink nearby, this KEMIMOTO motorcycle cup holder is built for one job: keeping a bottle or cup from bouncing around while you’re on the move. It uses an alligator-style clamp and an Oxford fabric cup sleeve, aiming to feel more secure than the “fits, but shifts” style holders you may have seen.
On paper, the pitch is straightforward—avoid loosening/spinning during high-speed riding and stop the usual annoyance of trying to grab a bottle that’s slid out of place. It also targets real-world mess: there’s a drain at the bottom, so water shouldn’t just pool inside the holder.
That said, it’s not a universal match for every bike setup. The manufacturer specifically calls out some models as not compatible, and the clamp only fits a specific pole/handlebar diameter. If your setup is outside that range, the holder won’t be the quick fix you’re hoping for.
Key takeaways on design and day-to-day feel
The upgraded clamp is one of the main reasons people would choose this style of cup holder. It’s described as a 90° adjustable alligator clamp with a sturdier screw setup (the design goes from a single screw to two screws) plus a cross-mounting hole pattern intended to reduce looseness and spinning.
There’s also a tightening drawstring on top. If you’ve ever ridden over rough pavement and watched a loosely held bottle flop around, that drawstring approach is meant to cinch the top and keep the drink more stable.
The holder body uses 600D Oxford fabric, not plastic or stainless steel. That matters because the product positioning here is practical: fabric should be easier to live with (and it’s described as washable) compared with rigid parts that can rattle or scuff.
Tech specs (the numbers you should actually check)
- Fits pole/handlebar diameter: 0.6"–1.5"
- Max drink capacity mentioned: 24oz
- Bottom diameter of the cup holder: 3.94 in
- Material: 600D oxford fabric
- Clamp adjustment: 90° adjustable alligator clamp
- Included features: bottom drain, adjustable top drawstring, 2 separated mesh pockets, hand screw installation
Where it shines (and where it may feel limiting)
This cup holder tends to make the most sense for riders who want a clamp-mounted accessory that stays put while moving, especially if you carry a bottle and don’t want it slipping during bumpy stretches. It’s also a decent “utility add-on” because of the two separate mesh pockets—useful for small stuff like keys or a few essentials you don’t want rattling loose.
However, you should be a little skeptical if your priority is a perfect, no-movement fit on every ride scenario. The product is designed to reduce spinning and loosening, but it still depends heavily on correct installation and whether your handlebars/pole diameter truly lands within 0.6"–1.5".
Also keep in mind the cup holder bottom diameter is called out (3.94 in), so if your bottle/cup shape is unusual, it may not sit as confidently as standard sizes.
Practical tips for a smoother install and better stability
Installation is designed around a hand screw system, which generally means you can adjust and remove it without specialized tools. Before you mount it, confirm your handlebar/pole diameter in the real world—don’t guess. This clamp is only meant for 0.6"–1.5".
Once installed, take a second to test stability before you ride. If the clamp isn’t tightened properly, you’ll feel it right away over uneven roads. Then cinch the adjustable drawstring on top so the bottle can’t shift around.
Quick example: imagine you’re heading out for a weekend ride and you toss in a 24oz bottle. With the bottle seated in the holder, you cinch the top drawstring snug, then go over a rough speed bump slowly the first time. If it stays put there, you’re usually in good shape for longer stretches.
Compatibility notes you should not skip
The manufacturer lists specific non-compatibility: it is not compatible with Road King, Spyder RT, and Burgman 400s. It also depends on pole/handlebar diameter being within 0.6"–1.5".
So if you’re shopping for a universal solution, this one is “universal” in the broad sense (bike/ATV/UTV/scooter/boat/walker use cases are mentioned), but the fit rules are still strict. If your setup falls outside the clamp diameter or matches one of the listed exclusions, you’ll likely waste time and end up looking for a different mount.
When it makes sense to buy it
Buy it if you want a clamp-mounted motorcycle cup holder that emphasizes stability: an upgraded alligator clamp design, a top drawstring to secure the bottle, and a bottom drain to help manage water inside.
It’s especially worth considering if you carry a drink while riding and you also like having a couple mesh pockets for small items.
Final verdict
Should you buy it?
The KEMIMOTO Motorcycle Cup Holder is a practical choice if your handlebars/pole are 0.6"–1.5" and you’re looking for a fabric cup holder that aims to stay from loosening or spinning during rides. The upgraded 90° adjustable clamp, top drawstring, and bottom drain all point to stability and everyday usability.
You may want to skip it if you’re on one of the listed non-compatible models (Road King, Spyder RT, Burgman 400s) or if your bottle/cup doesn’t match the holder’s bottom diameter (3.94 in). In other words: it’s solid for the setups it’s designed around, but it’s not the best bet if you need a truly no-questions-asked fit for every bike.
Mini FAQ
Is this cup holder only for motorcycles?
No. The product description positions it as usable for motorcycle, bike, ATV/UTV, scooter, boat, and walker setups—as long as your pole/handlebar diameter is within 0.6"–1.5".
What pole diameter does it fit?
It fits handlebars/poles with a diameter of 0.6"–1.5". You should confirm your measurement before buying.
Does it handle water or spills well?
It includes a drain at the bottom to help keep water out of the cup holder area.
What’s the maximum bottle size it supports?
The description states a max capacity of 24oz, and it also notes a 3.94 in bottom diameter, which matters for bottle shape.
What comes with the holder?
The product description focuses on the cup holder accessory itself, plus the mesh pockets and clamp features. It does not list additional parts beyond the holder design and mounting method.