A-KARCK Exhaust 45° Tube 3.5" OD mandrel bend pipe
Product description
This 45 degree mandrel-bent exhaust tube with a 3.5 inch outer diameter helps you build or repair a custom exhaust system with smoother airflow and easier fitment. It is a stainless steel elbow with flared ends for slide-in assembly, intended to improve exhaust flow and simplify welding and joining when fabricating pipes for cars or performance projects.
Key Points

The mandrel bend keeps the internal diameter consistent through the curve, which helps reduce turbulence and preserve flow. The pipe includes an expanded end to allow a snug slip-fit connection with other sections, making alignment and welding more straightforward. Made from stainless steel, the tube resists corrosion better than mild steel, according to the manufacturer, and is supplied at a length suitable for trimming and fitting to custom layouts.


Technical Specifications

- Name: A-KARCK 45 Degree Tube 3.5" OD
- Outer Diameter: 3.5 inches
- Bend Angle: 45 degrees
- Material: Stainless steel
- End Type: Expanded/flared slip-fit ends
Usage Recommendations



Measure the existing exhaust routing and allow extra length for trimming and tacking before completing final welds. The flared end simplifies sliding sections together, but cutting and welding are required to finish the joints and ensure a leak-free system. For best results, tack-weld first, verify fit and clearances around suspension components, and then complete full welds to avoid distortion.
Practical Tips

Consider that this tube is meant for custom fabrication and may not match factory-fit parts exactly. If corrosion or damage affects surrounding sections, replacing adjoining pieces and checking hangers and clamps will improve longevity. Welding stainless steel properly and using compatible filler material helps maintain corrosion resistance and appearance.
Products with discounts that might interest you
- Universal 4" to 6" Exhaust Elbow Pipe with Steel Clamp — Chrome or Black Finish
- YOLANDO MY910-5 Exhaust Elbow with Clamp, 5-to-6-Inch, Chrome-Plated Steel
- 5 Inch Exhaust Tip Elbow
- Bielpord Exhaust tip Dual Exhaust Tip, 2.5-Inch Inlet, Dual 3.5-Inch Outlet
- SKYMIRO 2.25" Exhaust Flex Pipe (304 Stainless) — 72" Universal Flexible Tubing
- EVIL ENERGY 473SU5T Exhaust Clamp, 2.5-Inch 304 Stainless Steel Band
- 5" to 6" Exhaust Elbow with Clamp (Chrome/Black Coating) — No Welding Required
- FortisArc LM-0406-silvery Exhaust Elbow, 4-Inch Inlet, 6-Inch Outlet, Clamp
- Bielpord Universal Stainless Steel Exhaust Muffler Tip (15" length, 2'' inlet / 3'' outlet)
- JY PERFORMANCE DAC910-6 Exhaust Elbow, 4" to 6" Outlet, 23" Long
- LCGP 5" Universal Diesel Exhaust Tip (10" Outlet, 18" Long) — Polished Stainless Steel, Bolt-On
- SYJIAN YING LJY425109-blk-2 Center/Center Single-Chamber Mufflers, 2.5-Inch
- TuhooMall Exhaust Heat Wrap for Motorcycle Car, 2" x 50' Fiberglass Header Tape
- FortisArc LM-0406-BLACK 4-to-6-Inch Exhaust Elbow, Clamp-On, Black
- JY PERFORMANCE 5 Inch ID Diesel Exhaust Tip Elbow — 5" Inlet, 6" Outlet, 23" Long Chrome Turndown with Clamp
- 5 Inch Diesel Exhaust Tip Elbow Tip 7 Inch Outlet
- Upower Universal Diesel Exhaust Tip 15"
- Bielpord Universal Car Exhaust Muffler Tips, 15" Length, 2" Inlet / 3.5" Outlet, Polished Stainless Steel
- A-KARCK Exhaust 45° 2.25" Tube 2 Pack
- Exhaust Tip 4" Elbow Chrome
- HILMITILE Exhaust Tip 5" Inlet 8" Outlet
- EVIL ENERGY 3.0 Inch Exhaust Clamp (2-Pack) — 304 Stainless Steel Lap Joint Band for Butt-Joint Connections
- Nilight Catalytic Converter for Nissan Altima 2.5L 2002–2006 🧰? (Wait)
- Dynomax Exhaust Muffler 17224


