# A-KARCK Exhaust 45° 2.25" Tube 2 Pack

Improve exhaust flow with the A-KARCK 2.25" 45° mandrel bend tube 2 pack, made of stainless steel for custom exhaust builds and repairs.

- [Original product page](https://www.ofertitastop.com/us/product/karck-exhaust-45-25-tube)
- [View offer](https://www.ofertitastop.com/us/visit/karck-exhaust-45-25-tube)
- Market: US
- Language: en-US
- Currency: USD
- Product updated: 2026-11-20T04:34:39.683Z
- SKU: ofertitastop-us-37383
- Category: Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts > Motor Vehicle Exhaust
- Source store: amazon US
- Active deal: Yes
- Price: 33.59 USD
- Previous price: 41.99 USD
- Discount: 20%
- Rating: 4.5 / 5
- Reviews: 81

Prices and deal status are the latest recorded data, not a guarantee of availability. Confirm the price and availability with the store.

## Description

This mandrel-bent exhaust tube kit helps you repair or build a custom exhaust system, improving flow and reducing backpressure for better engine responsiveness. The 2.25" outer diameter pipes come with flared expand-on ends to slide together easily, and their full-size elbows keep exhaust transitions smooth for fewer flow restrictions. If you prioritize simple welding and a direct fit, these tubes save time in fabrication, while if you prefer prefabricated assemblies you may opt for complete systems instead.

## Key points

The pack includes two stainless steel tubes that are long enough for basic custom runs, and the walls are thick enough for butt welding without excessive heat distortion. You get parts that are ready to trim, weld, and join, with an emphasis on airflow rather than decorative finishes. Keep in mind cutting and welding are required to complete the installation, and performance gains depend on overall system design and tuning.

## Technical details

- Name: **A-KARCK Exhaust 45 Degree Tube 2.25" OD 2 Pack**
- Size: 2.25" outer diameter
- Material: Stainless steel
- Bend: 45 Degree mandrel bend
- What’s included: 2 pipes

## Usage tips

Start by mocking up the routing before trimming to ensure proper fit and clearance, then tack weld the joints to check alignment. For cleaner joints grind mating surfaces flat and use consistent weld penetration to avoid leaks, and if corrosion is a concern consider coating or heat-resistant paint after installation.

## Where it shines

These tubes are practical when existing exhaust sections are rusted or damaged and you need a reliable mandrel bend to keep flow consistent. They work well for hobby fabricators who want control over pipe length and routing, and for repairs where replacing only a section is faster than swapping entire components.

## Images

![A-KARCK Exhaust 45° 2.25" Tube 2 Pack — 1](https://www.ofertitastop.com/i/uqgFfNtOLfmezqAfBhF2hTXBiK8tOsTpOQM49MxRmv0O8txUX37DacoheYGsyi7XeHyBEqwW8QhL1PJrbIEe44k6rMKd8dgO8zyXffYl5F4C8Y0lp2mD3hCR.jpg)

![A-KARCK Exhaust 45° 2.25" Tube 2 Pack — 2](https://www.ofertitastop.com/i/8Slalf4quHjX3vXmnW8RIOAhPMB1tOU4RaXmHMerD8ivVZEc649_gJb5jR8wwltSaQyzE98MofjPaglsIITheALdrbpdY4SI2GSU4d3zDvfjLDrslvk0TnyJ.jpg)

![A-KARCK Exhaust 45° 2.25" Tube 2 Pack — 3](https://www.ofertitastop.com/i/kSI42kSQo-OjNRhBgXQ7dwB_mmAvXz7ZuHXu0OsomrtSsJf_OCHDaqICpSjifX4ouMkZbG0lDP44JbAqSG-ECqQ5Z0abR_UYr2iafpeTYgWC4A49h_U73IDy.jpg)

![A-KARCK Exhaust 45° 2.25" Tube 2 Pack — 4](https://www.ofertitastop.com/i/qp5iEm0ctnxWsQWWhD8I4kdvUWglodEF4sYBe3MYYSyW2owuRzxDNrE52U4oPn7Fp4x26oNNs3h77YNGh3IF-QVRlMyXepCI4ZNXnqZhBao2ijEDzAiNPfzn.jpg)

![A-KARCK Exhaust 45° 2.25" Tube 2 Pack — 5](https://www.ofertitastop.com/i/UsOVcDYkM-V5EfpqprlBMu4fSZwyRcovPiAhdhhwUd4zQUof6WuBzGG1M0OzRxWlrYpgMCfoB_SvuIy_ni6lzB6uujZzgu0zcTckBZGacp6wzGoHUzkhPjGh.jpg)
