KAISH Telecaster Pickguard 3-Ply

The purple, 3-ply look gives this KAISH pickguard a visible way to change a Tele-style guitar’s appearance without changing its pickups or other hardware. It’s made of plastic and is listed as a fit for USA and Mexican Standard Fender Telecasters, with free mounting screws included. The fit limitation matters more than the color: Squier Telecasters and other Tele models aren’t listed as compatible, so this is a replacement part to match carefully, not a universal Tele guard.

Key points

This is an 8-hole pickguard for Telecaster-style guitars, finished in purple with a 3-ply construction. Its stated thickness is about 2.2 mm, with a listed variation of +/- 0.2 mm. That gives you a useful reference when comparing it with the part already on your guitar, but it does not confirm that the outline and screw positions will match every Tele-style model.

The listed fit is specific: USA and Mexican Standard Fender Telecasters. The description excludes Fender Squier Teles and other Tele types, some other models may need modification to fit, which is not a sure thing or a drop-in promise. Also, while the guard is described as humbucker-ready, the humbucker pickup itself has only two mounting screw holes in the pickguard. That detail is worth noticing if your setup depends on a different mounting arrangement.

How to use it

Treat this as a replacement pickguard, not a part to order based on the word “Telecaster” alone. Before installation, compare the shape and screw-hole layout with your existing guard. The product information does not provide a full set of dimensions, and pickguard patterns vary, so matching the model name alone may not be enough.

Once you’ve confirmed the fit, the included mounting screws can be used to attach the guard. The plastic has protective film that should be peeled off after installation. Keep in mind that a different Tele type may require modification, and the listing does not specify what changes would be needed or whether a particular guitar can be made to fit.

Practical tips

If you’re planning a straightforward cosmetic refresh, lay the new guard beside the old one and compare the outer edge and screw locations before taking the guitar apart. For example, if the screw positions line up but the outline differs, stop and reassess rather than assuming the plastic will sit flush. This simple check can help avoid turning a color change into a fitting project.

It makes sense if you have a USA or Mexican Standard Fender Telecaster and want a purple, 3-ply replacement, especially if the current pickguard’s layout matches. Compared with buying a more universal-looking part and hoping it fits, choosing by exact model and hole pattern is the safer approach. If you’re after a broader hardware or pickup change, this guard only changes the pickguard itself, it doesn’t include a pickup or promise compatibility with other Tele models.

Before you decide

Which guitars is it listed for? USA and Mexican Standard Fender Telecasters. Fender Squier Teles and other Tele types are excluded from the stated fit.

Does it have mounting holes for a humbucker? Yes, but the product notes there are two humbucker pickup mounting screw holes, not three.

Are screws included, and does the guard have a protective layer? Free mounting screws are included, and the plastic film should be peeled off after installation.

Is it worth it?

This pickguard is a reasonable fit for a targeted replacement: you want the purple 3-ply appearance, your guitar matches the listed Standard Fender Telecaster fit, and the existing guard’s outline and holes align. Not the best choice if you have a Squier or another Tele model and need a guaranteed direct fit, or if you can’t compare the dimensions and mounting pattern before buying. The two humbucker mounting holes are another practical constraint to weigh against your guitar’s pickup setup.