isinlive 2-Pack 360° HEPA + Activated Carbon Combo Filter (965432-01) for Dyson Air Purifiers
Product description
Overview: a 2-in-1 filter refresh for Dyson-style air purifiers
If your Dyson air purifier isn’t feeling as effective as it used to, the issue is often the filter. This isinlive 2-Pack 360° Combi 2 in 1 HEPA + Carbon Filter is designed as a replacement filter set for compatible Dyson models, using a combined HEPA + activated carbon approach in one filter system.
On paper, the selling point is clear: it pairs HEPA filtration with activated carbon to tackle both airborne particles and household odors. You get two filters in the package, which makes it easier to stay consistent with replacements rather than scrambling for a single replacement later.
What this filter is built to do
This replacement is described as a 360° combination HEPA and activated carbon setup. The HEPA portion is intended to capture fine airborne particles, while the activated carbon portion is meant to help address unpleasant odors and gases.
The materials and target performance mentioned include capturing 99.97% of particles as small as 0.3 microns (as stated in the product info). For the carbon side, the use cases called out include odors and gases such as cooking smells, smoke, and wildfire gases—so it’s meant to feel more “complete” than a basic HEPA-only swap if odor control matters in your space.
Here’s a practical example: if you cook regularly and notice kitchen smells lingering even after running your purifier, swapping to a HEPA + activated carbon combo can be the kind of reset that helps the purifier feel more useful day to day.
Key features that matter for real-world use
The product info emphasizes a “2-in-1” construction, with both HEPA and activated carbon working together. It also lists a replacement part number: 965432-01.
A couple of details are worth paying attention to: - The listing includes a note that this filter is NOT compatible with certain Dyson models. That matters because wrong-model filters can waste time and cause improper fit. - The reset process is part of the user experience. The filter doesn’t just need to be installed—it typically needs the purifier to recognize the new filter through a reset.
Compatibility: double-check before buying
This filter is described as fitting a long list of Dyson models, including (as shown in the input) TP04, TP06, TP07, TP09, TP10, TP11, HP04, HP06, HP07, HP09, HP10, HP11, PH01, PH02, PH03, PH04, HP4A, TP7A, DP04, and PH3A series models.
However, there’s an important limitation in the provided info: it explicitly says this filter is NOT compatible with some models (it lists model numbers in the warning). So the safest approach is to verify your specific model number against the list before you order.
It may not suit you if you don’t want to take a few minutes to confirm model compatibility and follow the reset instructions after installation.
Technical details
- Replacement part number: 965432-01
- Filter type: 360° combi 2 in 1 HEPA + activated carbon filter
- Stated particle capture: 99.97% down to 0.3 microns
- Includes: 2 x filters (2-pack)
- Replacement guidance: recommended every 12 months (depends on usage and environment)
Usage tips: installation and resetting the purifier
Installation tips are included in the product info. It advises that before installing the TP10 filter, you disconnect power and make sure the strap area is facing upward.
After replacing the filter, you also need to reset the machine so it recognizes the new filter. The listing provides two reset methods depending on whether your device uses the “New Version” or “Old Version” setup.
One more compatibility nuance mentioned: if your device previously used a filter consisting of a filter mesh and activated carbon, you should remove that existing mesh and activated carbon before installing this 2-in-1 filter.
This isn’t the kind of replacement you can treat as a plug-and-play with zero effort—if you don’t want to handle resets, you might find that annoying.
Pros and potential drawbacks
On the plus side, the combo design targets both fine particulates (HEPA) and odors/gases (activated carbon). Getting a 2-pack also helps you stick to replacement timing, which is often where performance starts to drift.
On the downside, you have to be careful with model compatibility, and you’ll need to reset the purifier for it to recognize the new filter. If your main goal is only particle capture and you’re not concerned about odors, this “combo” approach may be more than you actually need.
Buying verdict
Worth considering if you’re using a compatible Dyson purifier model and you want a straightforward way to refresh both particle filtration and odor/gas help with a replacement you can plan for (two filters in the box).
You may want to skip it if you’re not willing to double-check the model list and follow the reset steps after installation, or if your Dyson model is specifically excluded by the compatibility warning in the listing.
Mini FAQ
How often should I replace these filters?
The listing recommends replacing every 12 months for optimal performance, depending on your usage and environment.
Does this filter include activated carbon?
Yes. It’s described as a 2-in-1 HEPA + activated carbon combo filter.
Is this compatible with all Dyson TP/HP/PH models?
No. The provided info includes a warning that it’s NOT compatible with certain models, so you should confirm your exact model number before purchasing.
What’s the replacement part number?
The replacement part number mentioned is 965432-01.
Do I need to reset the purifier after installing?
According to the instructions provided, yes—resetting helps the machine recognize the new filter, including separate steps for new vs. old versions.