ILKCC 80mm dashboard pad mounting disk, 3.15-inch heat-resistant adhesive discs
Product description
When a curved or textured dashboard makes it difficult to position a suction-cup phone holder, these adhesive mounting disks create a smooth, flat surface for the cup to grip. The ILKCC set includes three round, 3.15-inch replacement pads with VHB adhesive, sized for suction-cup mounts and accessories up to 80mm in diameter.
If you already have a mount that works for your phone or GPS, adding a dashboard disk is a practical alternative to replacing the holder. It also gives you pads for more than one mounting spot or future replacements.

What matters most
The key detail is the fit: each disk measures 3.15 inches across and is designed for suction-cup accessories no larger than 80mm in diameter. That covers many dashboard phone holders, GPS mounts, dash camera holders, and similar suction-cup accessories. Use the mount’s suction cup on the disk’s surface, the adhesive attaches the disk to the dashboard.



The VHB adhesive is intended to hold the pad in place, while the disk provides a flatter contact area on curved or textured dashboard surfaces. The pads are described as heat-resistant and made to withstand hot and cold conditions, making them suitable for use in a vehicle. Buyers appreciate the straightforward installation and useful size, while feedback on adhesion and stability is mixed. Some also report concerns about how long the pad lasts, so careful surface preparation is an important part of installation.
Best use cases

Choose these pads when you want to reuse a suction-cup mount on a dashboard where direct contact is difficult. For example, a driver adding a GPS holder can place a disk at the desired mounting spot, then attach the holder’s suction cup to the disk. The same approach can be used with a compatible phone holder or dash camera mount.
A direct-to-dashboard suction cup may suit a smooth, flat surface. These disks address a different need: creating a dedicated mounting area for suction-cup accessories on a curved or textured dashboard. They are not phone holders themselves, they provide the adhesive base for a separate compatible mount.



Tips for day-to-day use
Before applying a disk, make sure the chosen area is clean, dry, and free of dust, oil, and residue. Peel off the backing, stick the pad to the dashboard, and then secure the suction-cup mount to its surface. No tools are needed. Choosing the mounting spot before peeling the backing helps you position the disk where the holder will be convenient to reach and view.

The package contains three round disks, so you can set up multiple compatible mounting locations or keep the remaining pads for later use. Check the diameter of the suction-cup accessory against the 80mm maximum to ensure it fits the disk.
Practical questions



Will these disks fit my phone holder or GPS mount? They are designed for suction-cup mounts and accessories with a diameter of 80mm or less, including phone holders, GPS mounts, and dash camera holders.
How do I install a disk? Clean and dry the dashboard area, remove dust, oil, and residue, then peel and stick the disk in place. Attach the suction cup to the disk afterward.
How many pads are included? The set includes three round, 3.15-inch dashboard mounting disks.
Buying verdict
For drivers who want to keep using a suction-cup phone, GPS, or camera mount on a curved or textured dashboard, these ILKCC disks provide an adhesive mounting surface sized for accessories up to 80mm. The three-pad set is a straightforward way to create dedicated dashboard positions without changing the mount itself.
Products with discounts that might interest you
- Loncaster 617e44c1-3f46-414d-890c-fa4c3c560faf Dashboard Phone Holder, 2-Pack
- Marsrider All-New Motorcycle Phone Mount 98%
- Miracase 0804-161BLK Cup Holder Tablet Mount with Adjustable Neck and 360° Rotation
- Qifutan Phone Holders for Your Car Adjustable Suction Cup Mount
- Sailnovo Rooftop Cargo Carrier Bag 21 Cubic
- SYNCWIRE SW2083 MagSafe Car Mount, Zinc Alloy, Foldable 3-Axis Arm
- UBeesize Starlink Mini Mount 2025 Adjustable Roof Rack RV Pole Mount Kit
- Umbrauto Truck Bed Tent with Awning (5.5–5.8FT) — PU3000mm Waterproof Tailgate Pickup Tent for 2-Person Camping
- VEVOR JC25-ETR-5FT26PCS E-Track Rail Kit, Six 5-ft Rails and Ratchet Straps
- Viking Solutions VS-VSL001 SwiveLift Hitch-Mounted Lifting System, 300 lb
- Starlink Mini Magnetic Roof Car Mount 150 lbs
- andobil AC-001 MagSafe Car Vent Mount with 360° Rotation and Carbon Fiber Panel
- MeeFar Soft Roof Rack Pads 2 straps
- Nilight 50048R trailer junction box 7-way 🔌
- Nilight Spare Tire Carrier Mount Stake Pocket Bracket (150 Lbs) for 4/5/6-Lug Trailer Wheels
- BATSUVCER Rooftop Cargo Carrier Bag, 20 Cubic Feet
- FengYu 330lb Lockable Roof Rack Cross Bars for Hyundai Santa Fe (2024-2026) - Heavy Duty Aluminum, Anti-Theft
- TANX Roof Cargo Basket, 51 x 36 x 5 Inches
- BougeRV Solar Panel Crab Mounting Kit for Cars with Cross Bars
- Himal Outdoors 196852620357 Tailgate Bike Pad, 7-Bike Capacity, PVC Protection
- Renegrip Retractable Ratchet Straps Heavy Duty 1'' x 12ft (4 Pack) — 1760 lb Break Strength
- Lamicall BCSP01-RD Motorcycle Phone Mount with Dual Vibration Dampener, Red
- JOYTUTUS Truck Bed Tent for 5.5–5.8-ft Beds
- WOLFBOX Retractable Bed Step for Ford F-150 and F-150 Lightning (2021-2026) – Two-Tier, 330 lb Capacity

