GRIFEMA TV Stand for 20–80-Inch TVs

The adjustable height is the main reason to consider this GRIFEMA tabletop TV stand: it lets you raise or lower a compatible screen to better suit a couch, bed, or room layout. Its broad size range and support for VESA patterns up to 800 × 400 mm also make it a flexible replacement for a fixed-height stand. The T-shaped base is designed to provide balanced support, while non-slip pads help limit sliding on smooth surfaces. Before choosing it, match your TV’s mounting pattern and weight to the stand’s stated limits.

Key points

This stand is listed for TVs from 20 to 80 inches and supports up to 110 lb. That range covers many common screen sizes, but screen size alone doesn’t establish compatibility: the four mounting holes on the back of your TV need to match a supported VESA pattern. Listed patterns run from 100 × 100 mm through 800 × 400 mm, including several intermediate layouts.

The height adjusts by ±2.36 inches (±6 cm), which can help when a TV sits too low on a console or when you want a different viewing position beside a bed. It’s a tabletop alternative to mounting a TV on the wall, so you can use existing furniture rather than choose a wall-mount setup. Keep in mind that the adjustment range is limited, it won’t provide the broad positioning options of an adjustable wall arm.

How to use it

Attach the stand to the TV using a matching VESA pattern, then place the base on a suitable tabletop or other flat surface. The product information says installation requires no complex tools, includes instructions, and usually takes 10 to 15 minutes. For example, if a screen on a bedroom dresser sits below your preferred eye line, you can use the height adjustment to bring it closer to a comfortable viewing position without changing the furniture.

Before assembly, check the TV’s weight and the spacing of its mounting holes. The listed maximum is 110 lb, and the stand is intended for TVs within the stated 20–80-inch range. Staying within both limits matters, a screen that fits one measurement may still be unsuitable if its VESA pattern or weight falls outside the supported specifications.

Practical tips

Measure the VESA spacing between the four mounting holes on the back of the TV, rather than relying only on the model’s screen size. Then compare that pattern with the stand’s listed range and check the TV’s weight. This is especially useful if you’re replacing a stand on an older television or setting up a screen in another room, where the mounting layout may not be obvious at a glance.

The non-slip pads are intended to help reduce movement on smooth surfaces and protect against scratches. They don’t remove the need to place the base on a stable, appropriately sized surface. If you’re choosing between a simple tabletop stand and a wall mount, this option keeps the TV on furniture and allows modest height changes, a wall mount may suit a setup that needs the screen off the furniture altogether.

Questions before you buy

Will it fit every TV between 20 and 80 inches? Not necessarily. The TV must also have a supported VESA pattern and weigh no more than 110 lb.

How much can the height change? The listed adjustment is ±2.36 inches (±6 cm). That offers some flexibility, not a large range of repositioning.

Does installation require special tools? The product information says no complex tools are required and instructions are included. It gives a usual installation time of 10 to 15 minutes.

Should you buy it?

A solid pick if you want a tabletop stand for a compatible TV and value a small height adjustment over a fixed-height setup. The wide VESA range and stated 110 lb limit give you useful checks before installation, while the T-shaped base and pads suit a furniture-based arrangement. You may want to skip it if your TV exceeds either limit, its mounting pattern isn’t listed, or you need a much larger height change or wall-mounted positioning.