GOOACC 100PCS 7mm & 9mm Push-Type Retainer Clips (with Fastener Remover) for Lexus & Toyota
Product description
If you’ve ever wrestled with a front fender liner, engine under cover, or a bumper cover panel, you know how easy it is to crack clips or leave misaligned trim behind. These GOOACC push-type retainer clips are built for that kind of job: pop-in retention for common Lexus and Toyota fastener locations, plus a bonus fastener remover to help you get them out without turning a simple task into a frustrating one.
The essentials
You’re getting a bulk set of push-type retainer clips in multiple hole sizes mentioned in the listing (7mm and 9mm, plus 6.5mm also referenced). The listing also calls out replacements for specific Toyota and Lexus clip part numbers, and it includes a tool described as a “fastener remover” meant to reduce risk of damage while removing door panel and upholstery-style clips.
On paper, this is the kind of kit you buy when you want enough replacements for a job—or for future maintenance—rather than stopping at just one or two spare clips. The set count (100PCS) supports that “do it once and be done” mindset.
The included remover is a practical touch. Removing old clips is often where people get overconfident and end up with bent trim or chewed-up fasteners. This tool is meant to make removal quicker and cleaner.
What stands out in day-to-day use
The listing emphasizes two build materials: durable plastic and metal for the remover tool, and nylon plastic for the clips.
That matters because push-type retainer clips are constantly dealing with vibrations, heat cycles, and repeated handling during panel work. Nylon is described as sturdy and less likely to crack compared with “other brands,” which is exactly the kind of weakness you want to avoid when you’re swapping fasteners.
Here’s a realistic mini scenario: you remove the wheel well liner to access something underneath. Old clips are stubborn, and if you pry the wrong way, you can damage the liner mounting points. Using the fastener remover tool first can help you pull clips out more decisively before you reinstall with the correct push-type retainers.
Key limitations to keep in mind
This kit is aimed at specific push-type retainer applications and hole sizes. If your vehicle uses a different style of fastener or a different hole diameter than the listing references, the clips may not seat properly.
Also, while the listing provides multiple replacement references, it doesn’t confirm fit for every Lexus/Toyota model year beyond what’s mentioned. So yes, it can be a strong match—but you still want to verify the clip type and the hole size where yours currently sit.
Best use cases (and who it suits)
Worth considering if:
- You’re doing DIY work on exterior trim like front fender liner, engine under cover, or rear bumper cover push-type retainers.
- You want a larger quantity so you can replace damaged clips during the same job (and keep spares).
- You’d rather have a dedicated removal tool than improvising with basic prying methods.
It may not suit you if:
- You only need one or two clips and you don’t want to buy in bulk.
- Your application doesn’t match the referenced push-type retainer concept and hole sizes.
- You’re expecting a performance “upgrade.” This is primarily about fitment and replacement, not improving drivability or anything like that.
Tech specs
- Material: Nylon plastic for the clips, durable plastic and metal for the fastener remover
- Quantity: 100PCS
- Hole sizes mentioned: 6.5mm, 7mm, 9mm (clips described as fitting into specific hole sizes)
- Replacement references mentioned: Toyota/Lexus push-type retainers including 90467-10183 and 90467-07201 (and additional Toyota GM references listed)
Is it worth it?
It’s a sensible buy if you’re tackling a trim or under-cover job where push-type retainer clips are part of the workflow, and you want enough replacements to finish cleanly without pausing to hunt for the right clip. The inclusion of a fastener remover tool also addresses one of the most common pain points—damaging clips or surrounding trim during removal.
You may want to skip this if you’re not confident your current fasteners match the push-type style and the hole sizes referenced in the listing. In those cases, even a well-made nylon clip set can end up being the wrong fit, and you’ll lose time sorting it out.
Mini FAQ
Will these replace my existing push-type clips?
The listing positions them as compatible replacements for certain Lexus and Toyota push-type retainers, including specific part numbers and hole-size fitment (7mm and 9mm are clearly referenced). If your current clip matches that type and size, they’re likely to do the job.
What is the fastener remover for?
The remover is described as helping quickly and easily remove door panel and upholstery clips without causing damage. It’s included to make removal less risky during DIY panel work.
Are the clips made of metal?
No—the listing describes the clips as made of nylon plastic. The remover tool includes durable plastic and metal components.
What size should I choose?
The listing references clips that fit into specific hole sizes (including 7mm and 9mm, plus 6.5mm). You’ll want to check the hole size of the mounting points you’re working on before ordering.
Do I need to buy this in a bulk quantity?
Only if you expect to replace multiple clips in one job or want spares for future work. If you need just a single replacement, buying in bulk might be more than you need.