Dalattin LED Strip Lights 100 ft

If you want white light across a long run rather than a small, focused task light, this Dalattin LED strip set is designed to cover more room, cabinet, or mirror space. It includes two 50-foot rolls connected to one controller, with 1,800 LEDs and a 6500K daylight-white color temperature. The rotary control lets you adjust brightness, which is useful when you want the same installation to feel less intense in the evening. Its length is a practical advantage, but it also means planning the route and checking the surface matter before you start sticking it down.

Key points

The main appeal is the combination of a long total run and adjustable brightness. Use it to add white light along kitchen cabinets, around a mirror, or through a dim corner, the 6500K color is daylight white, not a warm, amber-toned glow. That distinction matters if you’re choosing lighting for a space where you want a cooler-looking white.

The two 50-foot rolls connect to a single controller, so they’re presented as one setup rather than separate independently controlled zones. The strip runs on 24V, and the description says it emits low heat and can be touched. It’s also cuttable at the copper-wire markings, giving you a way to adjust the run for your layout. It suits you if you want one dimmable white-light installation across several areas or a longer continuous route.

How to use it

The basic installation is peel-and-stick: apply the adhesive backing to a dry, clean surface. That makes it suitable for straightforward placements on cabinets, mirrors, and other clean areas, without adding a separate mounting method to the plan. Before cutting, identify the copper markings and make the cut there, the product description specifically warns against cutting elsewhere.

Keep in mind that the adhesive recommendation is for a dry, clean surface, so a dusty or damp spot doesn’t match the stated installation conditions. Also, because both rolls connect to one controller, this setup is less suited to plans that call for separate brightness controls in different parts of a room.

Practical tips

For a kitchen, picture a run beneath cabinets that brightens the counter area, for a bedroom, the strip can trace a mirror edge or add light along a corner. These are uses suggested by the product’s format, not a promise of a particular lighting result. Map the intended route before peeling the backing, especially if you’ll need to trim the strip to fit. That helps you place the cut at a copper marking and avoid committing adhesive before you know where the run ends.

It might not be a great match if you’re after warm-toned light, independently dimmed sections, or an installation surface that can’t be kept clean and dry. If your priority is a short, localized light rather than a long run, a smaller-format solution may be easier to place.

Before you decide

Can the brightness be adjusted? Yes. The description says to rotate the control box to dim or brighten the strip.

Can you shorten it? Yes. It can be cut at the copper-wire markings.

Are the rolls controlled separately? No separate control is described, the two 50-foot rolls connect to one controller.

Final verdict

Choose this set when you need a long stretch of dimmable, daylight-white LED lighting and can install it on a dry, clean surface. Its strongest practical advantage is having two connected 50-foot rolls, while the key trade-offs are the cool-white color and shared controller. If those fit your layout and lighting preference, the features line up with the job, if you need warmer light or separately controlled areas, look for a setup built around those needs instead.