# Creality filament dryer Space Pi

1.75mm and 2.85mm filament support with adjustable 45–70°C settings, not for buyers who need a listed humidity readout.

- [Original product page](https://www.ofertitastop.com/us/product/creality-filament-dryer-space-pi)
- [View offer](https://www.ofertitastop.com/us/visit/creality-filament-dryer-space-pi)
- Market: US
- Language: en-US
- Currency: USD
- Product updated: 2026-10-19T07:06:40.655Z
- SKU: ofertitastop-us-120723
- Category: Hardware > Hardware Accessories > Cabinet Hardware > Cabinet & Furniture Keyhole Escutcheons
- Source store: amazon US
- Active deal: Yes
- Price: 59.99 USD
- Previous price: 85.99 USD
- Discount: 30%
- Rating: 4.5 / 5
- Reviews: 456

Prices and deal status are the latest recorded data, not a guarantee of availability. Confirm the price and availability with the store.

## Description

If your prints are usually made with filament that behaves well straight from the spool, a dedicated dryer may be more than you need, if moisture-related printing issues are a concern, the Creality Space Pi adds controlled heating and a timer. It uses a 110W PTC heater with a fan to circulate hot air around the filament, and the touch screen gives you temperature and duration settings in one place. Its listed support for several filament types and both 1.75mm and 2.85mm diameters makes it relevant to a mixed-material setup, though the product details do not specify a humidity reading or a way to verify how dry a spool is.

## Where it shines

The main appeal is having a dryer that can heat and hold a spool while you prepare a print, rather than relying on a basic storage container or trying to address damp filament during a failed job. The advertised 360° hot-air circulation is intended to distribute warmth around the chamber, while the PTC heater is rated at 110W. Temperature can be adjusted from 45°C to 70°C, and the timer can be set from 0 to 48 hours. Those controls offer more flexibility than a simple on/off warmer, especially when switching between materials with different settings.

For example, you could set the dryer before starting an ABS or PETG print, then route filament from the box toward the printer while it runs. The listing also names PLA, TPU, Nylon, PLA-CF, PA-CF, and ASA, but it does not provide a material-by-material drying chart here. Use the settings appropriate to your spool rather than assuming one temperature or duration works for every filament.

## Highlights

A 3.7-inch LCD touch screen displays drying conditions, supports °C and °F, and provides one-touch temperature presets for up to 12 filament types. The controls can also be adjusted manually within the stated temperature range. If power is interrupted, the dryer is described as remembering the previous material and temperature settings, which can save setup time when it restarts.

Worth considering if you regularly rotate through compatible filament types and want heating, a timer, and basic controls in the same box. If you prioritize a simpler, lower-effort setup for occasional PLA printing, a storage solution without active heating may be enough. From the way it is set up, this is a temperature-controlled dryer, not a device with a listed humidity sensor or a readout that confirms the filament has reached a particular moisture level.

## Best use cases

This dryer makes the most sense for a desktop printing workflow where spools need active warming before or during a job, including setups using 1.75mm or 2.85mm filament. The broad material list is useful, but the listing does not give chamber dimensions, spool capacity, or a detailed drying guide, so those details matter if you have unusually large spools or need a specific material routine. Its 110V, 50/60Hz input is also worth matching to your setup.

Better avoided if you need documented humidity measurements, a stated spool capacity, or a validated drying schedule for a particular filament. Those details are not provided, so buyers who need that level of control may prefer a dryer whose specifications spell them out.

## Should you buy it?

Buy the Creality Space Pi if you want adjustable heat, a long timer, and support for common and composite filament types in one dryer. It offers more active control than a passive spool box, while remaining focused on drying rather than measuring filament moisture. Skip it if confirmed dryness readings or clearly specified capacity are essential to your decision, those are meaningful gaps in the available product information.

## Images

![Creality filament dryer Space Pi — 1](https://www.ofertitastop.com/i/XbKCHCXzI0bFlRgEYUlRmoblZHaOMS74dDLDza49vk1pkLmfmIya2HGo4o3ILQhBwFSbcQ-AlYVIyYkQ2Q_xMy8KOWSrVgGZnRyBGF8Pi36fYwlnnGQduA.jpg)

![Creality filament dryer Space Pi — 2](https://www.ofertitastop.com/i/kMVhqgq8kJlAiaaP17wYRYHdsgtBNxRUmySCE83QnkkfW0NNgS8qfctapesCPIDQ3yoF_aRGhjScNSUkWfUtBaC-ZnEGf4wiIZKUOiTjUXgQlDT8S8vjiA.jpg)

![Creality filament dryer Space Pi — 3](https://www.ofertitastop.com/i/_BEHo1TPS5P-NY-EHPi4cqTYmqQH3GMMpYV1fDLxfPxtQQ1i58uU-M3L8nv3xU0vOusAIs0qpszQxwQB3hhuwBH7jng2BKsC1evVLfGauGWHOho1Mzg1UA.jpg)

![Creality filament dryer Space Pi — 4](https://www.ofertitastop.com/i/FPAcfS_XnrjwNrFkHVUsu70KGa_9a-4UU_itWrZGW4k1BgVEUTrlwd63S9ix-Lgd25Gh89Gp8vntqQPTt8s04kDJpZc1Ewihx4CeZb0jd9piLoSETC_gUA.jpg)

![Creality filament dryer Space Pi — 5](https://www.ofertitastop.com/i/G4YxRQJYtsw9V3Vkhk6ZGuyV7r7dk0py8QE99q68MSZnydJoXDdYk5-OEbVofrLzji79NojRHf9GLBlfuopuY6L3JUomGeGI9GxWCgsNJnfI2eA6hTEzpQ.jpg)