Cordless Robotic Pool Cleaner SAT30

When leaves, silt, and residue build up between pool cleanings, a cordless robot can handle the routine floor work without dragging a vacuum hose around. This cleaner is designed to cover pool floors, walls, and waterlines, with selectable modes for a floor-only run or broader coverage. It is listed for pools up to 2,150 sq. ft., so that coverage limit is a practical starting point when deciding whether it matches your pool. Its battery-powered setup also avoids a cord trailing through the water, though the available details do not specify charging time.

Size & fit

The stated pool limit is up to 2,150 sq. ft. The maker describes it as suitable for both inground and above-ground pools, and says its navigation adapts to round, rectangular, and kidney-shaped layouts. Those claims make it more versatile than a basic floor-only cleaner, particularly if wall and waterline buildup is part of your usual maintenance. Still, pool area alone does not tell you how long a cleaning cycle will take in your specific pool, and the provided information does not give dimensions or weight for handling and storage.

For a routine clean, you turn it on, place it in the water, and select Floor, Wall, or All-Coverage mode. That gives you a way to focus on the bottom after a quiet week or choose broader coverage when the waterline and sides need attention too. Would a dedicated floor cleaner be enough? If your pool rarely needs wall scrubbing, the extra climbing functions may matter less than straightforward floor coverage. The cleaner is also described as returning to the pool edge when its cycle ends, which may make retrieval more convenient, but it does not remove the need to check and empty the filter basket after use.

Pros

• Floor, wall, and waterline cleaning modes let you match the run to the job rather than always choosing full coverage.
• Smart mapping is intended to reduce repeated passes and cover the pool systematically.
• A 250μm filtration basket is specified for capturing fine silt as well as larger debris.
• The cordless design and stated runtime of up to 180 minutes suit longer cleaning sessions without a connected power cord in the pool.

One trade-off is that the listed runtime is a maximum, not a promise for every pool or cleaning mode. The details also do not state how long recharging takes, so frequent back-to-back cleaning may require some planning. The maker describes the unit as IP68-rated and built for underwater use, that rating is not a substitute for following its operating and care instructions.

Spec sheet

• Type: Cordless robotic pool cleaner
• Model: SAT30
• Motor: 180W brushless
• Suction: 45,000Pa
• Battery: 7800mAh lithium
• Stated runtime: Up to 180 minutes
• Filtration: 250μm basket
• Cleaning modes: Floor, Wall, and All-Coverage
• Pool coverage: Up to 2,150 sq. ft.
• Enclosure rating: IP68
• Color: Space Grey

Is it worth it?

Worth considering if you want one cordless cleaner to handle more than the pool floor, and your pool falls within the stated area limit. The combination of selectable modes, mapping, and edge return is aimed at reducing hands-on cleaning, while the brushless motor and stated battery capacity provide useful context for a longer run. Better avoided if you need confirmed charging times, physical dimensions, or a guaranteed cycle length before buying, those details are not provided here. For a pool that mainly needs occasional floor pickup, a simpler floor-focused approach may be sufficient. For regular attention to walls and the waterline, this cleaner’s broader coverage is the more relevant reason to choose it.