ANYCUBIC PLA Plus 1.75mm 4-Pack Filament 🎨
Product description
This PLA Plus bundle brings tougher, low-shrinkage filament in four vivid colors for everyday 3D printing projects. The Anycubic PLA Plus 1.75 mm spool set is aimed at hobbyists and makers who want smoother layers and reliable prints for models, decorative pieces, and light engineering parts, while keeping filament handling simple.
Key Points
This filament is formulated for higher toughness and impact resistance, so parts are less likely to crack under light stress. The spooled filament is said to print smoothly with minimal bubbling or clogging, which helps deliver consistent surface quality and cleaner details. The bundle includes four reusable 1 kg spools in pink, purple, blue, and green, each vacuum sealed to protect against moisture and dust. Note that compatibility is described for most FDM 3D printers and printing pens according to the manufacturer.
Technical Specifications
- Name: Anycubic PLA Plus 1.75 mm filament 4 x 1 kg
- Diameter tolerance: - +/- 0.02 mm
- Spool weight: - 1 kg per spool
- Colors included: - Pink, Purple, Blue, Green
- Filament type: - PLA Plus (PLA+)
- Packaging: - Vacuum sealed reusable spools
Benefits
Higher dimensional accuracy and reduced shrinkage help maintain part geometry across longer prints. Because the filament is wound tidily on reusable spools, it is easier to feed and less prone to tangles that can interrupt a print. The cleaner extrusion, with fewer bubbles and clogs, assists in achieving finer layer transitions and smoother finishes for figurines and prototype parts. Additionally, the improved toughness expands the range of practical uses beyond purely decorative prints.
Usage Recommendations
Load the filament into a standard 1.75 mm extruder and start with a temperature within the typical PLA range, then adjust according to your printer and desired finish. Store unopened spools in a dry place and reseal used spools to limit moisture uptake. Consider printing test cubes to dial in extrusion multiplier and retraction settings because individual printers and ambient conditions may require small adjustments. Also, be aware that while toughness is increased, PLA Plus may still be less flexible than some specialist materials and may not be the best choice for parts requiring high bending endurance.
Price evolution
Description:
This PLA Plus bundle brings tougher, low-shrinkage filament in four vivid colors for everyday 3D printing projects. The Anycubic PLA Plus 1.75 mm spool set is aimed at hobbyists and makers who want smoother layers and reliable prints for models, decorative pieces, and light engineering parts, while keeping filament handling simple.
Key Points
This filament is formulated for higher toughness and impact resistance, so parts are less likely to crack under light stress. The spooled filament is said to print smoothly with minimal bubbling or clogging, which helps deliver consistent surface quality and cleaner details. The bundle includes four reusable 1 kg spools in pink, purple, blue, and green, each vacuum sealed to protect against moisture and dust. Note that compatibility is described for most FDM 3D printers and printing pens according to the manufacturer.
Technical Specifications
- Name: Anycubic PLA Plus 1.75 mm filament 4 x 1 kg
- Diameter tolerance: - +/- 0.02 mm
- Spool weight: - 1 kg per spool
- Colors included: - Pink, Purple, Blue, Green
- Filament type: - PLA Plus (PLA+)
- Packaging: - Vacuum sealed reusable spools
Benefits
Higher dimensional accuracy and reduced shrinkage help maintain part geometry across longer prints. Because the filament is wound tidily on reusable spools, it is easier to feed and less prone to tangles that can interrupt a print. The cleaner extrusion, with fewer bubbles and clogs, assists in achieving finer layer transitions and smoother finishes for figurines and prototype parts. Additionally, the improved toughness expands the range of practical uses beyond purely decorative prints.
Usage Recommendations
Load the filament into a standard 1.75 mm extruder and start with a temperature within the typical PLA range, then adjust according to your printer and desired finish. Store unopened spools in a dry place and reseal used spools to limit moisture uptake. Consider printing test cubes to dial in extrusion multiplier and retraction settings because individual printers and ambient conditions may require small adjustments. Also, be aware that while toughness is increased, PLA Plus may still be less flexible than some specialist materials and may not be the best choice for parts requiring high bending endurance.
