ANYCUBIC High Clear 3D Printer Resin 1kg 🖨

This high-clear 3D printing resin brings high transparency and improved toughness to cast, display, and functional parts for resin printers. It suits makers who need crystal-like finishes with reduced yellowing over time while keeping handling more comfortable thanks to a light odor. The resin also works across a broad range of LCD and DLP printers using 365 to 405 nm light sources.

Key Points

The formulation focuses on long-lasting clarity, aiming to keep prints clear in interior conditions without developing a strong yellow hue. Follow the manufacturer's recommended printing parameters to adjust exposure times for the best transparency results. Highly Transparent surfaces are easier to finish when combined with post-processing varnish steps such as alcohol washing and a short topcoat cure.

Mechanical behavior is improved compared to many standard resins. The product description states a notable increase in resilience, which means models are less prone to fracture under impact or flex. Tough and Resilient parts are useful for prototypes, functional connectors, and hobby models that need more durability than brittle castings. The resin has a Low Odor profile and reduced irritation potential, which can improve workshop comfort during longer print runs. 🧴

Compatibility is broad across consumer resin printers. The resin is specified for a wide UV band, so it should function with most current LCD and DLP machines that list 365 to 405 nm wavelengths. Consider, however, that extremely detailed small features may still require fine tuning of exposure times and supports to avoid overcure or loss of detail.

Technical Specifications

• Name: ANYCUBIC High Clear 3D Printer Resin
• Weight: 1 kg
• Wavelength compatibility: 365-405 nm
• Odor level: Low odor, less irritating (according to the manufacturer)
• Key attribute: High transparency and resist yellowing performance
• Mechanical note: Increased resilience versus standard resin (manufacturer claim)

Usage Recommendations

After printing, remove supports and wash the model in alcohol to eliminate uncured surface resin. Apply a thin coat of the high-clear resin or a compatible varnish for extra gloss and improved light transmission. Cure the surface varnish for about two minutes as described in the product notes to lock in clarity and hardness. For intricate pieces and thin walls, reduce exposure time incrementally and perform test prints to avoid warping or overcure. 🛠️

Keep prints out of prolonged direct sunlight if you need to minimize any chance of color shift over many years. Users who require brightly colored or fully opaque finishes should note that this formulation is optimized for transparency and may not be the best choice when a solid pigment is the primary goal. 🎨.