# AN4 to 1/8 NPT Adapter, 6061 Aluminum

Get leak-aware AN4 to 1/8" NPT connection with EVIL ENERGY 4AN aluminum adapter, anodized black, for fuel, cooling, or power steering lines.

- [Original product page](https://www.ofertitastop.com/us/product/an4-to-npt-adapter-6061-aluminum)
- [View offer](https://www.ofertitastop.com/us/visit/an4-to-npt-adapter-6061-aluminum)
- Market: US
- Language: en-US
- Currency: USD
- Product updated: 2026-11-20T08:02:46.536Z
- SKU: ofertitastop-us-53934
- Category: Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts > Motor Vehicle Fuel Systems
- Source store: amazon US
- Active deal: Yes
- Price: 9.80 USD
- Previous price: 10.89 USD
- Discount: 10%
- Rating: 4.8 / 5
- Reviews: 1975

Prices and deal status are the latest recorded data, not a guarantee of availability. Confirm the price and availability with the store.

## Description

If you need a clean way to connect an AN4 line to 1/8" NPT, the EVIL ENERGY 4AN Male Flare to 1/8" NPT Pipe Fitting Adapter is built for that job. It uses an aluminum alloy construction with an anodized black finish, so it looks at home in engine bays while staying practical for frequent service. According to the manufacturer, the AN side is sealed on a 37-degree flare, while the NPT side uses 60-degree tapered threads for dependable connection behavior.

When you are working on fuel systems, cooling loops, or power steering plumbing, thread mismatch is often the real headache. This adapter bridges that gap by matching the 4AN male flare thread size of 7/16-20 UNF to a 1/8" NPT pipe thread end, making it easier to adapt existing hardware. ⚙️ The design also supports straightforward installation and removal with a wrench, which matters when you are doing maintenance under time pressure.

## Key features
The core advantage is the AN4 to 1/8" NPT conversion in one compact fitting. On the AN side, the flare sealing at a 37-degree angle helps form a proper interface when the mating flare is installed correctly. On the NPT side, the 60-degree tapered thread profile is made to work with typical NPT sealing practices.

Material and finish are part of what makes this adapter comfortable to use in real builds. It is made from aluminum alloy 6061-T6 and finished with an anodized black surface, which can help resist everyday wear in the areas where fittings are exposed. ✅ Because it is aluminum alloy, it stays lightweight while still being suitable for a wide range of automotive and mechanical plumbing setups, based on the manufacturer description.

Installation is intended to be manageable without special steps beyond normal wrench work. According to the manufacturer, the fitting allows easy installation and removal with a wrench, so you are not wrestling with tools longer than you need. 🧰 That makes it a practical choice when you are adjusting routing, doing troubleshooting, or preparing a system for service.

## What to know
Before installing, the most important detail is sealing on the NPT end. The manufacturer strongly recommends using sealant or PTFE tape to help prevent leakage at the NPT side. That recommendation is especially relevant when you are dealing with fuel or fluid systems where small seepage can quickly become a bigger problem.

It also helps to verify that your line and mating components are the correct type before you start tightening. The adapter is specifically for an AN4 male flare to a 1/8" NPT thread connection, and the 4AN thread size is 7/16-20 UNF according to the provided specs. If your setup uses a different AN size or different pipe size, forcing a match can lead to poor sealing.

One more practical consideration is installation technique at the interface. When both flare and thread sides are seated correctly, the fitting can support a reliable connection. If you ever notice difficulty tightening or uneven contact, stop and re-check alignment and mating parts before continuing.

## Tech specs
- Name: EVIL ENERGY 4AN Male Flare to 1/8" NPT Pipe Fitting Adapter
- Type: AN4 to 1/8" NPT adapter fitting
- Material: Aluminum alloy 6061-T6
- Color: Anodized black surface
- Sealing on AN side: 37-degree flare sealing
- NPT thread style: 60-degree tapered threads
- 4AN thread size: 7/16-20 UNF

## What’s included
This listing is provided as a 2 piece set, so you can build a matched pair for common routing needs. Having two adapters on hand is useful if you are converting both ends of a line, replacing multiple connectors in the same system, or planning ahead for future maintenance. It can also simplify work because you can keep your parts together during setup.

It’s also a good idea to confirm your sealing plan before you start installing. Since the manufacturer notes that the NPT end should be sealed with sealant or PTFE tape to help prevent leakage, you can buy or prep those materials ahead of time. That way, installation stays smooth and you can focus on getting proper alignment and a snug, correct fit.

## Images

![AN4 to 1/8 NPT Adapter, 6061 Aluminum — 1](https://www.ofertitastop.com/i/-qPyeOredclfJ6VwKTCEXV60UP0CbqsXF3r1yotygUn5w3qkp8k7cXgO13t16A72bXgy5imwGRmhsfywIX0PDu03SkwahyFSI95UDIPBH-v_jOF0txPyoPNjCw.jpg)

![AN4 to 1/8 NPT Adapter, 6061 Aluminum — 2](https://www.ofertitastop.com/i/YBGXRIhmVIwruClW65saMXTg2RvzFuxXQmJpVPOWXprwVI2RB1Vetj0XRrREfmhNrW7dds3dQu84xgGFwsXj4FH7P49ofpy4pJeDK6qzjnpf9hO5arpsplqPWg.jpg)

![AN4 to 1/8 NPT Adapter, 6061 Aluminum — 3](https://www.ofertitastop.com/i/3yGSDPj1BnUMJOf-L_s_wY9lCBiuT-xCXH5kS9iRZcJmychZHq0eQsvBGfWV7GiZS293jsTPE9AzytKXWRSdAy2geQyRyB835kS3h0juPvVJodj5yfb3SN63FA.jpg)

![AN4 to 1/8 NPT Adapter, 6061 Aluminum — 4](https://www.ofertitastop.com/i/EuGpCrrrWH6kHGqD7lUMtaLt1CvKRMePFVpsHzg6k40yc1uwmAZTjBBsFQzet3ddDvXwAUmclqLjsh8fNgSXuXjESZH7iO0TrMMT91mhVVShuBCrd8HvSlvRGw.jpg)

![AN4 to 1/8 NPT Adapter, 6061 Aluminum — 5](https://www.ofertitastop.com/i/1FaOeJ617j7P3Kz8UqM24y2BVkW_jwkYwcaA4dJG6JMVp9-yiF2hncP_RWbZxqhKIkBTOmrI-atP1X0Aq6l_96CDLidsXT1bQJMzBByJWEEVyukz9zrNo6XUyQ.jpg)
