YOSH Magnetic Phone Holder for Dashboard & Windscreen with 6 Strong Magnets and Washable Suction Cup
Product description
What it is and why you’d want it
This YOSH magnetic car phone holder is designed around one simple idea: effortless one-hand mounting. Instead of lining up fiddly clamps every time, you attach a metal plate to your phone (or to the outside of your case) and then the holder snaps to it using six built-in strong magnets. On paper, that’s the kind of setup that makes daily use feel noticeably quicker—especially if you’re taking calls, switching routes, or adjusting your screen angle while driving.
It’s also meant to suit more than one mounting preference. The suction cup is described as installable on a dashboard, windscreen, or other flat surfaces, and the arm plus 360° rotation ball joint is there so you can dial in a comfortable viewing angle. If you regularly drive with navigation or use your phone for music and calls, this approach can reduce friction every time you get in and out of the car.
That said, it’s not perfect for every interior. The instructions are clear about surfaces it doesn’t play well with, and magnetic holders can be a bit hit-and-miss depending on how your phone/case sits in practice.
The essentials (and the trade-offs)
The headline features are pretty straightforward: - Strong magnetic grip: six magnets rated around 30N, with the claim that it won’t affect your phone signal. - Washable sticky suction cup: made from washable TPU sticky gel, intended to stick firmly and leave no trace. - Adjustable positioning: telescopic arm plus a 360° rotation ball joint for fine-tuning the angle. - One-hand operation: designed for quick attach/remove and easier angle adjustments.
Where you’ll likely feel the “value” is in the day-to-day routine: touching your phone to the mount and having it hold without extra locking steps.
Where you should be cautious is installation and surface suitability. The base description notes it is not suitable for uneven, raised, folded corners, soft leather dashboards, or dashboards with segmented dividers or cut lines. If your car’s interior doesn’t offer a genuinely hard, smooth, flat area, the suction cup may not stay put as confidently—no matter how strong the magnets are.
Installation and setup tips that matter
Getting the best hold depends more on setup than most people expect. The guidance provided is specific, and it’s worth following:
First, choose a surface that’s hard and smooth. Then clean it with alcohol before sticking. After you place the holder, press firmly for 60 seconds and leave it alone for 24 hours. That “settle time” can be the difference between a mount that feels solid and one that feels slightly uncertain.
For angle adjustments, the process is also defined: press and hold the base first, then adjust. That helps keep the mount fitting tightly and securely in different situations.
Finally, don’t skip the phone side prep. The instructions suggest sticking the metal plate onto your phone or on the outside of your case before using the mount. This is normal for magnetic mounts, but it does mean you’re committing to that plate arrangement.
What you’ll notice in use (practical scenarios)
Imagine you’re heading to work: you park, then rather than re-mounting your phone with two hands, you simply bring the phone close and let the magnets “catch”. With one-hand operation, it’s quicker to answer a call or start navigation and then fine-tune the angle using the telescopic arm and 360° rotation.
On bumpy roads, the design claim is that six magnets (around 30N) should keep your phone secure. It’s not a guarantee for every road surface or every dash placement, but it’s a sensible spec choice for everyday UK driving—where potholes and uneven patches are common.
One more practical limitation to keep in mind: if your dashboard area has raised sections or cut lines, the suction cup may struggle, and you’ll waste time re-positioning the mount.
Tech specs (only what’s stated)
- Type: Magnetic car phone holder for dashboard and windscreen
- Magnets: 6 built-in strong magnets (around 30N)
- Phone size compatibility: generally up to 6.7 inches
- Rotation: 360° rotation ball joint
- Arm: adjustable, extendable telescopic arm
- Suction cup: washable TPU sticky gel suction cup
- Mounting surfaces: dashboard, windscreen or other flat surface (installer suitability depends on smoothness/flatness)
- Claim: magnets should not affect phone signal
Where it shines, and where it may fall short
It’s a good fit if you want a quick, repeatable mounting routine and you’re happy to use a metal plate on your phone or case. The magnetic approach suits people who drive often, use navigation frequently, and want a mount that’s easy to attach/remove with one hand.
It may not be the best choice if your car has a soft leather dashboard, uneven areas, or a segmented divider/cut-line layout—because the suction cup positioning depends heavily on installing onto a hard and smooth surface. Also, if you’re the type who absolutely hates sticking anything to your phone or case, that plate requirement could be a deal-breaker.
Worth noting: it’s described as generally compatible with a wide range of phone models, but real-world fit still depends on your case and how you position the phone plate.
Is it worth it?
If you’re after an easy magnetic mount with adjustable viewing angles, this YOSH holder looks well-aimed for everyday driving—especially where one-hand attach/remove saves time. The magnets (around 30N) and 360° rotation are the sort of details that usually matter once you’re using it daily.
You may want to skip it if your dashboard/windscreen setup can’t provide a hard, smooth, flat sticking point, or if your interior includes segmented dividers, cut lines, or soft leather areas mentioned as unsuitable. In those cars, other mounting approaches (that rely less on a perfectly smooth suction surface) might be more reliable.
Mini FAQ
Questions buyers often ask
Will it work on a soft leather dashboard? No, it’s not suitable for soft leather dashboards, and it’s also not recommended for uneven or raised areas.
Does the mount come with guidance for first-time sticking?
Yes. The instructions say to clean the surface with alcohol, press firmly for 60 seconds, and leave it alone for 24 hours for best effect.
Do I need a metal plate on my phone?
Yes. The instructions recommend sticking the metal plate to your phone or the outside of your case before using the mount.
Can I adjust the angle once it’s installed?
You can. The guidance says to press and hold the base before adjusting, and it also supports a telescopic arm and 360° rotation ball joint.
Does the magnet affect the phone signal?
The product description claims it won’t affect your phone signal, but if signal matters hugely for your setup, it’s still sensible to check your own experience once installed.