XXZU 74” Camera Tripod (Aluminium) with 360° Ball Head, Quick Release Plate, Phone Holder – Tripod/Monopod

If you’re shopping for a camera tripod that can also pull double duty as a monopod, XXZU’s 74” aluminium model is the sort of kit that makes sense for travel and mixed setups. It’s built around a removable design (tripod becomes monopod), a 360° ball head for flexible framing, and adjustable legs that aim to keep things steady on less-than-ideal ground.

That said, it’s not a full “studio rig” replacement. It’s more of a travel-friendly support for everyday shooting, not something you’d pick if you need ultra-fine control for heavy professional workloads. Still, for many photographers and content creators, it lands in the practical middle where value matters.

Key takeaways

The big ideas here are versatility and reach. The tripod is tall (up to 176cm, and up to 188cm with the included phone holder) and folds down to a compact length for storage, while the 360° ball head supports multi-angle shooting with tilt rotations.

Where it stands out is how many ways you can use it: standard tripod shooting, monopod shooting, macro/low-angle possibilities (via an invertible centre axis), and even trekking-pole-style use based on the description. The included quick release plate and phone clip also point to one clear target: people who switch between a DSLR/SLR setup and a mobile phone.

You’ll also see a few thoughtful stability choices on paper: fully extended legs for a wider base, and a counterweight hook to hang extra weight if needed. Real-world stability will depend on how carefully you extend the legs and whether you’re on firm ground, but the intent is there.

The essentials

This XXZU tripod is an aluminium support for cameras and phones, designed with several adjustments that help you adapt quickly:

• Height adjustment: a 3-level-angle design for the legs, plus locks for the centre column and leg tube sections.
• Head movement: a 360° panoramic ball head with additional tilt rotation options for different shooting angles.
• Multi-device use: a universal phone clip and a removable quick release plate using a standard 1/4” screw.

In practical terms, imagine setting it up outdoors for a walk-and-talk video: extend the legs, level the horizon using the bubble levels, then tilt the head to frame while you stand slightly off to the side. If you want a faster, more mobile shot after that, you can swap the setup into monopod mode.

It’s also positioned as usable for more than cameras, since the description mentions accessories and equipment such as projectors, telescopes and monitors. Whether it fits your exact gadget is something you’ll want to confirm based on the mounting method and weight—because the kit only gives a clear max load figure, not a guarantee for every device.

What stands out

The headline feature is the 360° ball head. With flexible panoramic rotation and tilt options, it’s meant for framing without constantly re-positioning the whole tripod. The description also mentions two bubble levels, which is a genuinely useful detail when you’re trying to keep horizons straight or avoid wonky vertical lines.

Next is the stability approach. The fully extended legs increase the base area, and there’s a counterweight hook for hanging heavier objects. That combination can help when you’re setting up for longer shots or when the surface isn’t perfectly level.

Finally, the “convert into monopod” design is a strong practical hook for travel. If you’ve ever carried a tripod only to end up shooting handheld for half your session, this type of design can reduce that regret—assuming you like the look and feel of monopod shooting.

Spec sheet

• Type: Camera tripod with monopod conversion
• Head: 360° ball head
• Max load: 10KG (vertical) or 5KG (45° tilt)
• Height: up to 176cm (with phone holder up to 188cm)
• Folded length: 42cm
• Leg adjustment: 3 level angle and length adjustments per leg
• Rotation/tilt: 360° panoramic rotation plus 90° and 45° tilt rotation options (as stated)
• Bubble levels: 2 bubble levels
• Compatibility: standard 1/4” screw quick release plate and a universal phone clip

Where it shines (and where it doesn’t)

It’s a solid choice if you want one support that can cover tripod shots, monopod work, and quick angle changes without having to swap gear constantly. It suits people who shoot with a DSLR/SLR and also use a phone for content—especially if you travel and value packing size.

It might not be the best match if your priorities lean towards heavy loads at high angles. The stated max load is higher vertical than at a 45° tilt, so you’ll want to be a bit conservative with heavier setups and avoid pushing angles too far if you’re near the limit.

Also, while the centre axis can be inverted for macro and low-angle shooting, that kind of feature is only as usable as your comfort with the setup. If you’re expecting effortless macro precision, you may find yourself adjusting more than you’d like—depending on the camera lens and how close you’re aiming to shoot.

Worth considering if you’re mostly in the “enthusiast to semi-pro creator” bracket: enough reach, enough adjustability, and enough versatility to justify the carry.

Practical tips for day-to-day use

Getting good results with a tripod often comes down to setup habits, not just specs. With this model, you’ll likely get the best outcome if you:

• Extend the legs to a stable, wide stance on the ground you’re on (especially on uneven terrain).
• Use the bubble levels before locking in your final angle.
• If you use the counterweight hook, keep it controlled and don’t exceed what you’re comfortable hanging—particularly if conditions are breezy.
• When switching between phone and camera, double-check the quick release plate is seated securely on the 1/4” mount.

And if you’re filming outdoors, a small win is using monopod mode for quick walking shots, then converting back to tripod for steadier takes once you find a spot.

Final verdict

It’s worth buying this XXZU 74” tripod/monopod if you want a travel-friendly aluminium support with a 360° ball head, bubble levels, a removable quick release plate (1/4” screw) and a phone holder—plus the added bonus of converting to a monopod and supporting macro/low-angle positioning.

You may want to skip it if your setup regularly pushes close to the stated max load, especially at more extreme tilt angles, or if you’re after highly specialised precision work where a more premium, fully featured support might be more appropriate.

If you like the idea of one flexible kit for mixed camera-and-phone shooting, this one reads like a practical buy on paper—just make sure your device weight and mounting needs fit the stated limits.

Mini FAQ

Is it suitable for both a phone and a DSLR?

Yes, the description includes a universal phone clip and a removable quick release plate with a standard 1/4” screw, aimed at combining phone and DSLR/SLR style setups.

How tall is it in practice?

The stated height is up to 176cm, with the phone holder bringing it up to 188cm.

Can it be used as a monopod?

Yes. One tripod leg tube and the centre axis can be removed and the unit can be reassembled into a monopod.

What’s the maximum load?

The max load is listed as 10KG vertical, or 5KG at a 45° tilt.

Does it include quick-release?

It’s described as including a removable quick release plate with a 1/4” screw.