Xcel Home 2 x M10 (10mm) x 3/8 BSP Flexible Tap Connectors – 500mm Braided Stainless Steel (Pair)
Product description
What this product is
Xcel Home offers a pair of flexible tap connectors designed for common UK plumbing setups. Each connector is braided stainless steel with an M10 (10mm) male end and a 3/8 BSP female fitting, laid out as 500mm long. They are intended for use with kitchen sinks, bathroom basins and monobloc mixer taps, making them a handy upgrade or replacement option when extending or replacing water supplies.
Why it might be the right choice
On paper, these hoses are built to resist leaks and withstand daily household use. The 304 stainless steel braid suggests good rust and wear resistance, while the braided design helps to manage bending without kinking. For homeowners tackling DIY replacements or a straightforward installation, the 500mm length can help reach standard fittings without stressing the pipework.
What stands out in use
These connectors are designed to be compatible with UK 15mm male fittings and use a 3/8 inch BSP standard, which is common for many taps. The M10 end is tailored for monobloc taps and similar fixtures. A practical benefit is that many users can hand-tighten these without tools for a quick fit, though some jobs may still benefit from a wrench for a firmer seal.
Strengths worth noting
- Stainless steel 304 braided construction for durability and corrosion resistance.
- 500mm length provides extra reach for tight spaces or repositioned taps.
- Compatible with UK standard 3/8 BSP fittings and M10 female ends, common in many kitchens and bathrooms.
- Designed to handle both hot and cold water, offering a straightforward replacement path for worn connectors.
Potential limitations
- It may not be ideal for installations that require a shorter or longer run than 500mm, or for taps with non-standard fittings.
- The convenience of hand-tightening is helpful, but in some setups you may still want a spanner to ensure a leak-proof seal.
- While 304 stainless steel is robust, it’s still worth checking for compatibility with any existing fittings and the water pressure in your home.
Ideal use scenarios
If you’re replacing worn hoses on a monobloc mixer or upgrading kitchen/bathroom connectors, these hoses can simplify installation thanks to the standard UK BSP sizing and straightforward fit. They suit DIY projects and quick repairs where durability and a neat finish are priorities.
When you might want to look elsewhere
If your setup requires non-standard thread sizes, a non‑braided hose, or a significantly shorter/longer length than 500mm, this pair may not be the best match. For very high-pressure scenarios or taps with unusual connections, you may prefer solutions specified for those conditions.
What to check before buying
- Confirm your tap’s connection type and the need for M10 male ends and 3/8 BSP female fittings.
- Measure the distance between tap and supply to see if 500mm covers the run without strain.
- Inspect existing fittings for compatibility with standard UK plumbing sizes (15mm male fittings).
Practical example of use
Imagine replacing a leaky connector under a kitchen sink where the existing hose has seen better days. With these braided stainless steel hoses, you can thread the M10 into the monobloc tap and the 3/8 BSP into the supply valve, then hand-tighten to a snug seal. The braided construction helps resist kinking as you route the hose around pipes and a sink waste, keeping a clean, unobstructed installation.
In the box / What you get
A pair of braided flexible tap connectors, each 500mm long, with M10 male ends and 3/8 BSP female fittings.
FAQ
- Are these connectors suitable for hot and cold water? Yes, they are designed for both hot and cold water systems.
- Do I need tools to install? They can be hand-tightened, but you may use a tool for a tighter seal if required.
- Will they fit all UK taps? They align with the common UK 3/8 BSP standard fittings and M10 connections typical of monobloc taps.
Decision time
Is it worth it? Worth considering if you need a durable, mid-length braided connector that fits standard UK fittings and offers straightforward DIY installation for kitchen or bathroom taps.