WORKPRO Air Brad Nailer 50 mm, 2-in-1

The essentials

A WORKPRO Air Brad Nailer Gun 50 mm gives you a compact way to drive either brad nails or Type 90 staples, which is handy when you want one tool for multiple workshop jobs. It runs from a compressed air setup, so you get consistent fastening without relying on batteries, and the pressure can be adjusted to suit different materials. Since it accepts 18G nails from 15 to 50 mm and Type 90 staples from 16 to 40 mm, it covers a useful range for furniture assembly, upholstery work and general woodworking tasks. 🙂

The lightweight aluminium body is designed to reduce fatigue over longer sessions, while the soft-grip rubber handle helps with control when you are working close to edges. Safety matters on air tools, and this one includes a contact safety switch and a safety lock on the head to help reduce accidental firing during stapling tasks. Working pressure is set within a typical 60 to 100 PSI range, and you can reach up to 120 PSI when connected to a suitable compressed air supply, so you have room to tune performance. 👍

If you prefer to spend time building rather than clearing up jams, the quick-release design is there to make it simpler to remove any jammed nails. There is also a large-capacity magazine, which means fewer reloads in day to day use. It is a practical choice for people involved in furniture making, upholstery, exhibition construction and similar trades where brad nails and staples both come up regularly.

It’s also worth noting that you will need your own air compressor for operation, as none is included with the tool. 🤝

Tech specs

• Name: WORKPRO Air Brad Nailer Gun 50 mm, 2-in-1 Air Nail Gun/Upholstery Stapler
• Type: Air nailer and air stapler
• Working pressure: 60 to 100 PSI
• Maximum working pressure: 120 PSI when connected to a compressed air supply
• Air hose size: 6 mm inner diameter air hose recommended
• Magazine capacity: up to 100 nails or up to 100 staples
• Included accessories: 400pcs nails and 300pcs staples

Key features

The operating range and adjustment capability help you match fastening strength to different material hardness. With the ability to work at 60 to 100 PSI, you can fine tune the air pressure to suit the job, rather than forcing every task to use the same setting. For some setups, the maximum working pressure can reach 120 PSI when connected to an appropriate compressed air supply, which can be useful if your workshop air delivery is strong. ?

The tool supports brad nails and upholstery staples, which means less time switching between separate tools when you are building, fitting or re-covering. It accepts 18G nails from 15 to 50 mm, and it also accepts Type 90 staples from 16 to 40 mm, so you can keep the same gun for projects where both fasteners are required. The practical value shows up especially in furniture making and upholstery tasks, where staple placement and brad detail are both common.

A large-capacity magazine helps with workflow because it can hold up to 100 nails or up to 100 staples. There is a quick-release design intended to make clearing jams easier, so the time spent troubleshooting is reduced when a nail or staple misfeeds. The soft-grip rubber handle supports precise control, which matters when you are working near visible surfaces or when you want consistent placement on timber and boards.

For safer everyday use, the head includes a special safety lock design and the contact safety switch helps prevent accidental firing. That combination is useful when you are adjusting position during upholstery or when handling the tool around materials. If you are used to air nailers, you will also appreciate that a male quick connector is included to help with faster setup, but remember you still need a compressor and the recommended hose.

The lightweight aluminium body is designed to keep the tool manageable, weighing 1.25 kg as stated. That helps during longer sessions, for example when carrying out exhibition construction, repeated furniture repairs, or workshop upholstery runs. ✅

Who it’s for

It’s a good fit if you frequently work with furniture making, upholstery or woodworking and you want one air tool that can handle both brad nails and Type 90 staples. It makes sense if you already have a compressed air setup and you want adjustable pressure for different materials of varying hardness. You’ll like it if you value easier jam clearing and a safety lock with a contact safety switch for more controlled operation. 🤔

It may not suit you if you do not have a compressor ready, because the tool requires connecting to compressed air to operate. It might not be a great match if your work is mostly small light duty tasks where a different fastening method suits you better. Worth considering if you want included nails and staples to get started right away, since the package includes 400 nails and 300 staples for immediate use.