Wasserrhythm Basin Pillar Taps Pair (Black) – Twin bathroom sink mono 2‑piece cloakroom faucets, matte black stainless steel, lead-free
Product description
What these taps are for
If you’re fitting out a cloakroom or updating a traditional-style bathroom sink, a pair of pillar taps like these Wasserrhythm basin pillar taps can be a practical way to get a clean, consistent look. They’re positioned as twin hot and cold taps (so you’ll control temperature via separate supplies), and the finish is matte black rather than glossy.
On paper, the attraction here is the combination of a black outer finish with a stainless steel body, plus the “classic” pillar form factor that tends to suit traditional basins and deck-mounted sinks better than modern flat-face styles.
That said, pillar taps aren’t the easiest choice if your priority is super-minimal, space-saving styling, or if you’re trying to avoid countertop plumbing changes. If you’re working with an existing tap setup, compatibility details around your sink holes matter a lot.
The essentials (key points)
The pair is designed around several everyday details: a matte black look, softening of the water stream, and control intended to be smooth.
The manufacturer claims the black coating uses multiple layers over the stainless steel body, aiming to look matte and resist peeling, while also trying to reduce visible water staining. It’s also described as using a bubbler aerator, so the flow is softened rather than feeling harsh or splashy.
Control-wise, the taps are described as using brass disc cartridges for water volume and temperature control, and the levers are said to feel comfortable and smooth.
One limitation to keep in mind: you’ll only really know how “matte” and stain-resistant it looks in your specific bathroom lighting and with your typical water quality. In other words, the finish should hold up better than cheap coatings, but it can’t be treated like a maintenance-free guarantee.
What you’ll notice in daily use
There’s a straightforward logic to the design. The bubbler aerator is intended to create a softer, featherlike feel as water comes out, which can be a pleasant touch for handwashing in a cloakroom.
The outlet is also described as a 45-degree bevel, sending water out at an angle that’s meant to suit washing hands and everyday basin use. That matters because angle and spray pattern affect how much water lands in the sink versus splashes around the basin.
A quick micro-scenario: imagine you’re brushing your teeth and need a steady flow for a short routine. With taps like this, you’re likely to appreciate the softened aerated stream for comfort, and the angled outlet may help keep the water hitting where you want it rather than spraying outward.
Materials and build—where this model tries to earn trust
These Wasserrhythm taps are described as thick lead-free stainless steel, with an overall weight stated at about 1000g for the pair. The listing also suggests they’re around 100g heavier than other double basin pillar taps in the same category.
In real-world terms, extra weight can be a good sign for solidity and longevity—though it’s not a direct substitute for build quality inside the cartridge and fittings. Still, for a product you’ll turn on and off countless times, a sturdier feel is usually welcome.
The coating approach is another area they lean on: a matte black paint system described as multiple layers wrapped around the stainless steel body. That “peel resistance” and the “less prone to water stains” angle is especially relevant if you live somewhere with harder water or you notice limescale marks.
Control and reliability: no leaks is the claim
The listing specifically states “No Leaking”, attributing this to advanced brass disc cartridges that control water volume and temperature.
It’s the kind of claim you should judge with a healthy bit of caution: no-leak expectations depend on correct installation, the condition of your pipework, and how the taps are used. But the presence of brass disc cartridges is a plausible route to consistent shut-off and controlled flow.
The lever action is also described as smooth and comfortable, conforming to an “artificial mechanics” design—again, subjective, but it points to an emphasis on day-to-day usability rather than just appearance.
Key specs that actually matter (tech specs)
- Type: Basin pillar taps (pair of hot and cold taps)
- Material: Lead-free stainless steel body
- Finish: Matte black
- Cartridge: Brass disc cartridges (for controlling volume and temperature)
- Water outlet design: 45 degree bevel
- Control style: 1/4 turn cross lever
- Aeration: Bubbler aerator to soften water flow
- Weight: About 1000g (pair)
Pros, and where it may fall short
Pros - Matte black look with a coating described as layered for peel resistance. - Aerated “featherlike” flow and a 45-degree outlet intended to suit handwashing. - Lead-free stainless steel body with a stated heavier build for sturdier feel. - 1/4 turn cross lever with brass disc cartridge control.
Worth noting / potential downsides - Matte finishes can be more sensitive to how you clean and maintain them, especially if you’re using harsher cleaners. - Pillar taps are not ideal if your installation setup needs to stay minimal or you’re trying to avoid any plumbing adjustments. - Without setup details, you can’t assume the tap pair will fit your sink configuration—hole spacing and existing pipework are the practical reality.
What to check before buying
Because tap fit is the make-or-break point, don’t stop at the finish and design. Before you commit, it’s sensible to verify: - Whether your cloakroom sink and existing plumbing are set up for pillar taps and the required hole arrangement. - Your expectations for matte black maintenance, given the listing’s “not easy to peel” and “not easy to leave water stains” positioning. - That you’re happy with the 1/4 turn cross lever control style (some people prefer different lever profiles).
If you’re replacing existing taps, also check that your new pair matches your expected hot and cold configuration, so you don’t end up rearranging pipework.
Compatibility
This product is described as a pair of hot and cold bathroom sink pillar taps for a cloakroom/bathroom sink setup. The listing text doesn’t provide specific inlet sizes beyond “1/4 turn cross lever”, so it’s worth confirming your existing plumbing and tap hole setup before purchase.
Should you buy it?
Worth considering if you want a traditional pillar tap look for a cloakroom or bathroom sink, and you specifically like matte black finishes that the seller claims are built to resist peeling and water staining.
It might not be the best choice if you’re trying to minimise installation work, or if your sink configuration doesn’t suit pillar taps—tap hole and pipework compatibility can be the difference between an easy swap and a frustrating job.
If durability and controlled, comfortable operation are high on your list, these taps lean into that with lead-free stainless steel construction and brass disc cartridges. Just be aware: no listing can eliminate the impact of installation quality and maintenance.
Mini FAQ
1) Are these taps hot and cold?
Yes—this is sold as a twin set with hot and cold control, using a pair of pillar taps.
2) What does “lead-free” refer to here?
The stainless steel body is described as lead-free in the listing.
3) Do they splash a lot?
The listing says they use a bubbler aerator to soften the flow. That typically helps reduce splash compared with a more direct stream, but your sink shape and water pressure still matter.
4) What controls do they use?
They use a 1/4 turn cross lever, with brass disc cartridges for volume and temperature control.
Final verdict
Should you buy it? If you’re after matte black twin pillar taps with a softer aerated flow and an angled outlet designed for everyday handwashing, this Wasserrhythm pair makes sense for a cloakroom-style upgrade. You may want to skip it if your sink isn’t set up for pillar taps or you’re not prepared for the practical checks that come with fitting any bathroom taps with a classic mounting style.