WALPLUS 3D Tile Stickers Peel and Stick Backsplash Decals (6 sheets, 12x12in)
Product description
The essentials
WALPLUS 3D Tile Stickers are peel-and-stick backsplash and splashback decals designed to give you a tiled look without the usual hassle of tiling. On paper, that means faster makeovers for kitchens, bathrooms and other indoor wall areas where you want pattern and texture more than heavy-duty installation.
You get 6 sticker sheets, each measuring 30.5 x 30.5 cm (12 x 12in). The coverage is listed as 0.54 sqm or 5.8 sqf for the pack. If you’re trying to cover a small area around a sink or refresh a section of wall paneling, these sizes are the kind of thing that can work out neatly.
Key points
These tiles are aimed at DIY decorators who want a quick visual upgrade. The “3D” effect comes from the printed/embossed look of the decal itself, so you’re not adding thickness like real tiles—more like a decorative skin over the surface. They’re also described as suitable for epoxy-type surfaces with water, oil and heat resistance, which is useful in kitchens where splashes happen.
That said, adhesion is very dependent on prep. The instructions specifically say to apply only to a painted surface at least three weeks after painting and to clean before you stick them on. If you’ve got latex paint on walls, you’re advised to add a layer of spray adhesive to help prevent peeling. So the product can be very convenient, but it’s not “stick anywhere, worry never”.
What matters most for performance
The standout selling point here is practicality: waterproof and resistant to oil and heat (as stated), plus the fact they can be trimmed/cut to fit. In everyday terms, that’s helpful when you’re working around corners, edges, or a specific section of splashback.
For a micro example: imagine you’ve got a tired-looking area behind a bathroom sink. If the wall is already painted and properly cured, you can clean it, then align and press the decal into place where you want the tiled effect. You don’t need to mix grout or wait for tiling adhesive to set—though you do need to take your time with placement because peel-and-stick is only as neat as your first alignment.
Worth noting: the guidance also suggests they can be used as ceiling tiles (self-adhesive) as well as splashbacks. That flexibility is handy if you’re using them for decorative surfaces rather than high-contact wall areas.
Where it shines (and where it can fall short)
Where it shines - Small-to-medium updates where you want a tiled look quickly. - Areas like kitchens and bathrooms, especially around sinks, where a splashback decal is the right concept. - Projects where you appreciate being able to trim/cut to size.
Where it may not be the best match - If your wall paint is new or not cured, you may be out of luck. The instructions say to wait at least three weeks after painting. - If the wall uses latex paint, adhesion may be less reliable unless you follow the added spray adhesive suggestion. - If you’re expecting the same level of realism as fully fitted tiles, this is more “decorative overlay” than true tiling. It’s not perfect if you’re after an ultra-authentic finish from every angle.
Tech specs
- Name: WALPLUS 3D Tile Stickers Peel and Stick Backsplash Splashback Decals Tile Transfer
- Type: Peel and stick tile transfer / decal sheets
- Coverage area (pack): 0.54 sqm or 5.8 sqf
- Pack contains: 6 sticker sheets
- Sheet size: 30.5 x 30.5 cm or 12 x 12in
- Stated surface/exposure notes: epoxy surfaces with water, oil and heat resistance
- Cut-to-fit: can be trimmed/cut to fit
Getting the most from it
Before you buy, it’s worth checking three practical things.
First, think about the surface. The instructions are quite clear: apply only to a painted surface at least three weeks after painting and clean the surface prior to application. That’s the difference between something that stays neat and something that lifts.
Second, consider your paint type. For walls covered with latex paint, it’s recommended to add a layer of spray adhesive to help prevent the tiles from peeling. If you’re not planning to do that extra step, you may find the results less consistent.
Third, manage colour expectations. The product note says colours can vary slightly between what you see on screen and the actual printed colour. If you’re matching existing décor, it’s a small detail, but it can matter.
Should you buy it?
Worth considering if you want a fast, DIY-friendly way to create a backsplash or splashback look in a kitchen or bathroom, and you can prep your painted surface properly (including allowing fresh paint to cure). It also makes sense if you like the idea of being able to trim to fit and you’re covering a modest area where the listed coverage will work.
It’s not for you if you’re dealing with a freshly painted wall, you don’t want to do the cleaning/prep steps, or you’re expecting it to behave exactly like professionally installed tiles. If your surface isn’t well suited, the decal may not sit as confidently as you’d hope—especially with latex paint where extra adhesive is suggested.
Mini FAQ
How long after painting can I apply these tile stickers?
The guidance says to attach them to a painted surface at least three weeks after painting.
Are these stickers waterproof?
They’re described as water resistant, along with resistance to oil and heat, for suitable indoor applications.
Can they be trimmed to fit around edges?
Yes, the instructions note they can be easily trimmed/cut to fit.
What should I do before sticking them on?
Clean the surface prior to application, and ensure the painted surface is sufficiently cured.
Will the colour match what I see online?
Not necessarily—there may be slight differences between screen display and the actual printed colour.