Vyzzle D10 Robot Vacuum (8000Pa) with LiDAR, Ultra-Thin 8.3cm, Mop, App/Alexa Control
Product description
The essentials
If you’re looking for a robot vacuum that can handle everyday messes (especially pet hair) and still reach those awkward areas under furniture, the Vyzzle D10 is built around a simple idea: strong suction plus LiDAR navigation, in a slim body that can get further than thicker units. On paper, it also tries to cover the “vacuum and mop” job in one device, so you’re not constantly swapping between tools.
That said, it’s not a flagship, do-everything-in-one-go solution for every home. The cleaning quality you’ll get will depend a lot on how you set it up, how much clutter is on the floor, and—because it’s still a robot—how realistic your expectations are for edge-to-edge detail.
Key features and what they mean in practice
The headline draw here is the 8000Pa suction. That’s meant for deep cleaning of pet hair, dust and debris, including the kind of particles that tend to get ground into hard floors. If you’ve got shedding pets or you’re constantly seeing fine dust reappear, stronger suction can make a noticeable difference compared with basic robot vacs.
The other big piece is LiDAR navigation and multi-floor mapping. Rather than just bumping around, it scans your home and creates maps automatically in a few minutes. The idea is more consistent coverage and fewer incidents like getting stuck or repeatedly bumping into furniture.
For multi-storey homes, it can store up to 5 distinct floor plans. That’s useful if you don’t want to re-map every time you move it between floors.
There’s also an ultra-thin 8.3cm profile. This is the kind of spec that sounds gimmicky until you try cleaning under low sofas, beds, or cabinets by hand. In day-to-day terms, it can mean fewer missed spots where dust and pet hair gather.
Where the mop fits into the picture
This is a “vacuum and mop in one go” approach, described as a 3-in-1 device: vacuum, sweep and mop. It can vacuum and mop simultaneously, so you can cut down on the number of passes.
However, it can be worth tempering expectations: mopping is usually best seen as maintenance (staying on top of light grime) rather than replacing a deep clean for stubborn spills. If your floors are heavily soiled, you may still need occasional manual intervention.
A practical example: imagine running it in the evening after dinner—vacuuming pet hair from carpeted areas while it handles light mopping on hard floors. You wake up to a floor that’s noticeably cleaner, even if you still do a deeper mop once in a while.
App and smart control (and a small limitation)
Control is via the app, with Alexa/Google assistance support mentioned, and you can set cleaning schedules or track progress. The entry also states it only supports 2.4G WiFi.
That last point matters more than people expect. If your home network is set up without 2.4G availability, you may need to adjust your setup before buying.
Navigation, safety, and real-world behaviour
The D10 includes anti-fall and anti-collision sensors. The aim is to reduce the chances of it getting stuck or falling down stairs, which also helps it use battery power more sensibly.
In other words, it’s designed to be “less annoying” when you send it out while you’re busy. Robot vacuums often live or die by how reliably they avoid trouble, so these sensors are a meaningful part of the value proposition.
Note too that battery life is described as up to 150 minutes on quite mode, with an important caveat: battery life depends on suction power. If you run it on stronger settings for heavy pet hair, runtime may be shorter.
The specs that help you decide (quick overview)
- Suction: 8000Pa, positioned for deep cleaning including pet hair and debris
- Navigation: LiDAR with multi-floor mapping, with up to 5 floor plans stored
- Slim design: 8.3cm ultra-thin profile for getting under furniture
- Cleaning approach: vacuum and mop in one device, can clean simultaneously
- Control: app plus Alexa/Google assistance, supports 2.4G WiFi
- Safety features: anti-fall and anti-collision sensors
- Runtime: up to 150 minutes in quite mode (depends on suction power)
Who it suits best—and who should be cautious
It’s a good match if you want a robot vacuum aimed at pet hair and dust, with LiDAR navigation and a slimmer height to reach under furniture. It also makes sense if you’ve got more than one floor and want mapping that can be reused via stored floor plans.
It might not be the best choice if you expect “proper human-level” cleaning along every edge and corner, or if your floors are often heavily stained and need frequent deep mopping. Also, if your home WiFi doesn’t include 2.4G, you’ll need to address that first.
Final verdict
Is it worth it?
Worth buying if you prioritise strong suction for pet hair, LiDAR navigation for more reliable coverage, and an ultra-thin 8.3cm build to deal with under-furniture dust. The vacuum-and-mop-in-one idea also helps if you’d rather do fewer passes each day.
Better avoided if you don’t have 2.4G WiFi available, or if you mainly need a robot that excels at stubborn, heavy grime rather than maintenance-level mopping. In most typical UK households, though, this looks designed for daily convenience—just don’t expect it to eliminate the occasional manual clean completely.
FAQ
Is the Vyzzle D10 suitable for carpets as well as hard floors?
It’s described as suitable for all surfaces, including carpet and hard floors, so it’s positioned as a one-device solution across mixed flooring.
Does it support multiple floor plans?
Yes. It can store up to 5 distinct floor plans, which is aimed at multi-floor homes.
Can it mop and vacuum at the same time?
Yes, it’s described as able to vacuum and mop simultaneously.
What WiFi does it need?
It only supports 2.4G WiFi, so it’s worth checking your home network setup before you order.
How long does the battery last?
The runtime is stated as up to 150 minutes in quite mode, but battery life depends on suction power.