Tonton Pole Mount with Screw Adapter for Blink cameras (1/4"-20 screw port)

What it is and why you’d want it

This Tonton pole mount with a screw adapter is designed to help you secure compatible cameras on a pole or other fixed surface, rather than relying on a wall mount or a more fiddly setup. In practice, it’s the kind of bracket you reach for when you want a cleaner outside-camera position (think driveways, front gates, paths) and you already know your camera needs a specific adapter style.

The listing is quite specific about compatibility: it talks about Blink models such as Blink Outdoor 4 (4th Gen) / Blink Outdoor (3rd Gen), Blink XT / XT2 and Blink Mini 2/1, using the supplied Blink camera adapter. It also mentions use with devices that have a standard 1/4"-20 screw port, plus some compatible solar panels that also use a 1/4"-20 screw hole. So, on paper, it’s aimed at people mixing and matching cameras and power setups that share that common screw standard.

That also means it’s not a “one mount fits everything” solution—if your setup doesn’t align with that adapter/port idea, you may end up disappointed.

Key features that matter in daily use

What stands out here is the combination of adjustable positioning and flexible fitting to different pole sizes. The mount includes four stainless steel band clamps in diameters of 2", 4", 6" and 8". These clamps can be connected end-to-end, which is useful if your pole isn’t one of the standard single-band sizes.

For aiming, it provides 360° swivel and 180° tilt adjustment. That’s the practical bit: it helps you fine-tune where the camera looks without having to undo everything and start again. For outdoor installs, that adjustment range can save time when the “perfect” mounting height still leaves you with an awkward viewing angle.

Another point worth noting is flexibility of placement. The description says it can support mounting on round poles, walls, or ceilings. If you’re planning a corner install (for example, above eye level looking down a path), having more than one mounting surface option can be handy.

Compatibility: where it’s strong, and where it could fall short

The strongest compatibility claim is for Blink cameras using the included Blink camera adapter. If you’re specifically working with Blink Outdoor / XT / Mini ranges as mentioned, this is the sort of bracket that should slot into your current ecosystem more smoothly.

The listing also claims additional compatibility for certain devices and solar panels with a 1/4"-20 screw hole/port. That’s a big deal if your goal is to mount both a camera and a solar panel neatly using the same mounting standard.

However, keep expectations realistic: the product name is about a Blink pole mount, so if you mainly want a general-purpose bracket with no need for the Blink adapter, you may still need to check your camera’s attachment method carefully. If your device uses a different interface, this could be more effort than it’s worth.

What you’ll get in the box

The kit includes: - 1 × pole mount - 4 × band clamps - 1 × Blink camera adapter

Cameras are not included, so you’ll need to use your existing Blink camera (or a compatible device, depending on the screw port requirement).

Practical installation tips (so you don’t waste time)

A small bit of prep goes a long way with pole installs. Before you fully tighten anything, do a dry positioning pass: use the 360° swivel and 180° tilt adjustments to check the viewing angle, then only tighten the clamps once you’re happy.

If your pole is square (the listing mentions round or square poles in the supported range), make sure the band clamp configuration matches the pole shape before you start aiming the camera. It’s one of those jobs where getting the mechanical fit wrong first can mean fiddling again later.

Also, if you’re planning to combine this with a solar setup using a 1/4"-20 screw hole on a compatible solar panel, plan the order of mounting. You’ll generally want the camera angle set with the solar panel position already accounted for, otherwise you may find you have to re-aim.

Where it shines vs simpler alternatives

This mount makes the most sense when you’re choosing an install location that’s awkward for a basic wall bracket—like a pole-mounted, off-centre position where you want to “aim it properly” after fitting. The adjustment range (swivel and tilt) is what helps here.

If your priority is a straightforward wall/ceiling placement with minimal adjustment, a simpler mount may be less hassle. But if you care about getting the camera viewing angle right—especially outdoors—this type of adjustable pole mount tends to feel more worth it.

It’s also a good choice if you’re thinking long-term about solar panel and camera alignment using the same 1/4"-20 screw standard. That’s where the listing’s “screw port” focus can pay off.

Is it worth it?

It’s worth buying if you have a Blink camera setup listed as compatible, and you specifically want a pole-mounted solution with meaningful aiming adjustment. It’s also a sensible pick if your camera (or camera + solar panel plan) involves a standard 1/4"-20 screw port/hole, because that can simplify how you build the mounting around your equipment.

You may want to skip it if your device uses a different mounting interface than the one described, or if you simply don’t need pole fitting and wouldn’t benefit from 360°/180° aiming. In that case, a more basic mount might save time.

Before you buy, double-check two things: that your Blink model uses the included Blink adapter approach, and that any solar panel or other accessory you plan to attach genuinely matches the 1/4"-20 screw hole/port idea mentioned.

Mini FAQ

Does it include a camera?

No. The box includes the pole mount, band clamps and the Blink camera adapter, but cameras are not included.

What poles can it fit?

The listing says the band clamps can connect end-to-end to install on round or square poles ranging from 2" to 17" in diameter.

How flexible is the aiming?

It supports 360° swivel and 180° tilt adjustment, which should help you fine-tune the camera’s direction after mounting.

Can it mount on surfaces other than poles?

Yes, it’s stated to support mounting on round poles, walls and ceilings.

What’s the “1/4"-20 screw” bit about?

The description says the mount is designed to work with devices and solar panels featuring a standard 1/4"-20 screw hole/port, depending on what you’re attaching.