SQMIX65 Buffing & Polishing Foam Pads (SPTA), 5pc Kit – 6.5 inch face for 150mm backing plate
Product description
What these polishing pads are for
This SQMIX65 5-piece buffing and polishing pad kit is aimed at anyone who wants to step through the usual paint-correction stages rather than relying on a single pad for everything. It covers a range of foam cutting levels, from heavier work to finer finishing, and the pads are designed for use with a rotary polisher (and, where noted in the base description, also DA/GA setups).
On paper, the big appeal is the spread of grades in one kit: you can remove sanding marks and other defects, then refine the finish, and finally polish for a smoother, glossier look. If you regularly deal with compound work (compounding, polishing, waxing, and even sealing glaze), having multiple pads in one purchase can be more convenient than buying separately.
There’s also a practical design element worth noting: the front face and rear side are different diameters, specifically 6.5 inch (165mm) on the front and 6 inch (150mm) on the back. The intention is to help protect surfaces during polishing and reduce abrasion on the pad, plate, and paintwork.
Key takeaways
You get five foam pad types, each described for a different cutting/finishing stage, with sizes chosen to suit a 6-inch (150mm) backing plate approach. The foam is described as bendable, washable and reusable, which is handy if you plan to keep using the kit over time.
Where it gets a bit more “real world” is the pad behaviour: the description specifically highlights that the pads are designed to lock and remain with polishing compound, reducing the chance of it dropping off at high speed. That’s the sort of detail that can matter when you’re running a session with sustained polish action.
That said, the kit is only as good as your process. If you’re expecting it to compensate for the wrong technique, uneven panel prep, or mismatched compounds, it may feel limited—pads can’t replace good sanding, clean polishing, and correct product pairing.
What you’ll notice in use (cut level range)
The kit includes pads described as: - T120 Green Heavy-Cut: positioned for removing 1200/1500# sanding disc marks, deep scratches, overspray, orange peel, and heavy oxidation. - T80 Yellow High-Cut: aimed at 1500/2000# sanding marks, swirl marks, and heavy/medium oxidation. - Blue T60 Moderate-Cut: for 1500/2000# sanding marks and medium oxidation. - Orange T40 Medium-Cut: for 2000# sanding marks, fine scratches, and light oxidation. - Red T10 Ultra-Fine Finishing: described as swirl-free for a gloss finish, targeting car wash scratches and ultra-fine swirl marks.
One simple way to think about it: start with the pad that matches the defect level you’re trying to shift, then step down through the cutting grades until you’re polishing for clarity rather than correction.
A micro-example: imagine you’ve sanded out defects around the bonnet and now see remaining sanding haze and light swirls. You’d typically move from the moderate/high cut pads (T60/T80) to the medium cut (T40), then finish with the ultra-fine T10 pad for a cleaner, glossier result.
Where this kit makes sense
This kit is a strong “one-box” choice if you want to cover multiple stages of paintwork on the same vehicle, or you’re doing repeat jobs where compound selection and pad choice both matter.
It also sounds designed for flexibility across common polisher types: the base description calls out rotary polisher as ideal for the heavy-cut pad, and states T80/T60/T40 can work for RO (rotary), DA and GA car polishers, with T10 aimed at rotary or DA polishers too.
Finally, the foam material is described as washable and reusable, which can be a real time-saver once you’ve got your workflow.
What to be careful about before buying
The name includes “for 6 inch 150mm backing plate”, but the listing description doesn’t provide details like whether this is fully compatible with every backing plate or machine. It’s sensible to double-check that your backing plate setup matches the 150mm approach.
Also, foam pads can vary in behaviour depending on pad condition and your compound. The kit description mentions reduced compound falling off at high speed and good heat dissipation capacity, which helps, but you’ll still want to keep an eye on pad loading and work rate during polishing.
Lastly, if your expectation is a complete “anything-to-anything” solution, it may leave you wanting. This is still a pad kit—you’ll need the right compounds and a sensible polishing routine to get the best results.
Pros
- Five cutting/finishing grades in one kit, so you can progress from heavy correction to ultra-fine finishing.
- Foam pads described as bendable, washable and reusable for longer-term use.
- Design intended to protect the surface and reduce abrasion on the pad, plate and paint.
- Notes about compound staying put at speed, which can help maintain polish effectiveness.
- Heat dissipation capacity is mentioned, which is useful for longer sessions.
Final verdict
Worth considering if you want a single foam pad kit that covers multiple correction stages and you’re comfortable choosing the right pad for the defect level you’re working on. It suits buyers who are doing regular compounding and polishing (including polishing, waxing, and sealing glaze workflows).
It might not be a great match if you only ever do one simple step, or if you’re not planning to pair pads with appropriate compounds and a consistent machine technique. You may also want to skip if your existing backing plate setup doesn’t line up with the described 6 inch (150mm) approach, because pad fit and performance do depend on that sort of compatibility.