SMALLRIG BSL2680 adjustable lens support bracket 15mm

This lens support bracket is a height adjustable aid for DSLR shoulder rigs that helps carry heavier glass while keeping the camera mount protected. It fits onto standard 15 mm rods and offers a vertical range that adapts to different lens profiles, making it useful for video shoots and run-and-gun setups.

Technical Specifications

• Name: SMALLRIG BSL2680
• Mount: 15 mm standard rods with LWS spacing
• Compatible lens diameter: 50–140 mm
• Vertical adjustment range: 34.5 mm
• Design: Y-shaped support with rubber pads and strap slots

Key Points

The bracket transfers much of the lens weight off the camera body, which reduces stress on the lens mount and on the camera during prolonged handheld or shoulder-rigged operation. The Y-shaped top includes two rubber pads that increase grip and protect the lens surface, while a slot on each side accepts a safety strap for extra security. A central quick-release knob lets you raise or lower the Y-support by up to 34.5 mm, so you can fine tune alignment quickly on set 🎥.

This accessory mounts straightforwardly to 15 mm rods with standard LWS spacing, so it integrates with many popular small rig setups and follow-focus assemblies. The construction aims to be robust for production use, although heavy cinema lenses at the outer diameter limit may still need additional support depending on their weight.

Benefits

Having an adjustable support under the lens helps prevent wear on the camera’s mount and reduces the chance of accidental damage when using long or heavy lenses. It also stabilises long optics during handheld moves, which can make framing and focusing easier during longer takes. The rubberised contact points avoid surface marring, and the strap slots add a simple mechanical backup that can be useful in dynamic shooting environments 🔧.

Consider that compatibility is given in terms of diameter rather than weight. According to the manufacturer, the bracket is compatible with lenses between 50 and 140 mm diameter, so very wide or unusually shaped lenses may not fit well. Also keep in mind that if you rely on extremely heavy cinema glass, a supplementary tripod foot or heavier-duty support might be necessary for full safety.

Usage Recommendations

Position the bracket beneath the lens foot, or at the tripod collar if present, then clamp the bracket to the 15 mm rods and set height with the quick-release knob. Check that both rubber pads contact the lens barrel evenly and fasten a safety strap through the side slots if you are moving between takes. For low-angle shoulder work adjust the height so that the lens sits slightly forward of the rig’s balance point to maintain comfortable handling.