Simpeak 4 Set Screen Protectors for DJI Osmo Action 5 Pro (Lens + Front + Back) tempered glass, 9H
Reviews
Product description
If you’re using a DJI Osmo Action 5 Pro day-to-day, the screen is one of the first places that picks up marks. This Simpeak 4 Set Screen Protectors is designed to stay out of your way while adding a layer of protection where it matters.
The pitch here is simple: tempered glass, a 9H hardness rating, and coatings aimed at cutting down fingerprints and water spots. It’s not a rugged replacement for careful handling, but it could be a sensible way to keep the display looking cleaner for longer—especially if you often pack the camera in a bag with other gear.
Key takeaways
This set covers the lens area plus both the front and rear screens, and it’s built specifically for the DJI Osmo Action 5 Pro form factor. On paper, the tempered glass is 0.33mm thick and said to be very clear (claimed 99% transparency), so you’re not really losing the look of the display. Installation is positioned as “align and press”, with the promise of no air pockets when fitted properly.
The biggest practical benefit is having spares. You get 4 lens protectors, 4 front screen protectors and 4 rear screen protectors, plus install tools—so when one protector gets damaged or you’re not satisfied with a first try, you’ve got replacements rather than starting from scratch.
What really stands out
Where this set feels most useful is its “all-in-one” approach for the Action 5 Pro: lens + front + rear. Lots of screen protection options only address the display surface, but here you’re also covered for the lens protector part of the package.
It also leans into daily usability. The screen coating is described as oleophobic and hydrophobic, with the goal of reducing fingerprint absorption and helping prevent water spots during normal use. If you’ve ever wiped a camera screen repeatedly after an outdoor session, that’s the kind of improvement you notice fast—assuming the coating behaves as described.
The essentials
This is a tempered glass accessory set that’s explicitly compatible only with the DJI Osmo Action 5 Pro. The materials and coatings are geared towards scratch resistance (9H) and a clearer view (HD clear, claimed 99% transparency). At 0.33mm thick, it’s designed to keep the original touch sensitivity, and it’s stated to respond quickly to screen access.
Installation is described as straightforward: remove dust, align correctly, press so it adheres securely, and maintain touch sensitivity. The pack includes tools to help with fitting and the stated promise is no air pockets when you install it carefully.
Who it’s for (and who should think twice)
It suits you if you regularly use the camera outdoors, travel with it, or want a straightforward way to reduce visible wear from scuffs and scratches. A multi-pack like this is especially handy if you expect the camera to be used hard, or if you prefer having replacements ready before you actually need them.
It may not be the best match if you’re very sensitive to any change in how the screen feels or reads—tempered glass is thin, but it’s still an extra layer. Also, since compatibility is specifically limited to the DJI Osmo Action 5 Pro, it’s not meant to be a general-purpose protector you can reuse across different camera models.
Tech specs
- Type: tempered glass screen protectors set
- Compatibility: only compatible with DJI Osmo Action 5 Pro
- Hardness rating: 9H
- Thickness: 0.33mm
- Clarity claim: 99% highly transparent (HD clear)
- Coating: oleophobic and hydrophobic layer (to reduce fingerprints and help prevent water spots)
- Contents: 4 lens protectors, 4 front screen protectors, 4 rear screen protectors, 4 set install tool
Everyday use
On a typical day, you’d install the protectors once and then treat the screen a bit more casually—quick checks, thumb taps, and wiping away smudges without worrying as much about micro-scratches. A concrete example: if you’re filming while moving between bright outdoor light and indoor spaces, your screen likely gets fingerprints and light condensation residue, the described coating aims to make those spots easier to manage.
That said, installation matters. If dust or misalignment gets trapped, you can end up with a less satisfying fit—so it’s worth taking your time aligning each protector.
Buying verdict
Buy this Simpeak set if you’ve got a DJI Osmo Action 5 Pro and you want tempered glass protection for the lens plus both screens, with multiple spares in the box. The combination of 9H scratch resistance, a claimed thin profile, and an oleophobic/hydrophobic coating makes sense for people who use their camera often and want the display to stay clearer-looking.
Skip it if you don’t want any added layer on the screen feel, or if you’re not committed to careful installation. Also, because it’s only stated as compatible with the DJI Osmo Action 5 Pro, it’s not a “one size for all” accessory.
Quick FAQ
Will it fit the DJI Osmo Action 5 Pro?
The set is stated as only compatible with the DJI Osmo Action 5 Pro, designed to fit perfectly on the camera’s lens and screens.
Does it affect touch sensitivity?
It’s designed to maintain the original touch sensitivity and respond quickly to screen access, but results depend on correct installation.
What about fingerprints and water marks?
It’s described with an oleophobic and hydrophobic coating to reduce fingerprint absorption and help prevent water spots during daily use.
What’s included in the pack?
You get 4 lens protectors, 4 front screen protectors, 4 rear screen protectors, and 4 sets of installation tools.
How many protectors do I get?
In total, the pack provides four for each area: lens, front screen, and rear screen.