X-Sense Wi-Fi Water Sensor SWS0A41

If you want early warning when water starts to escape, the X-Sense Wi-Fi Water Sensor with SBS50 Base Station, Smart Water Leak Detector is built for exactly that job. It uses an app connection so you can receive alerts when you are not at home, while the sensor helps you catch drips and small leaks before they become bigger problems 💧. According to the product details, when a leak is detected the sensor flashes red and the base station triggers an audible alarm up to 100 dB, giving you clear, quick feedback.

The essentials

The core idea is simple, detect water where it matters, then notify you right away. When the sensor detects water, the water leak sensor flashes a red light and the SBS50 base station sounds an alarm, while a notification is also sent to your phone. This makes it easier to respond quickly in everyday risk areas like kitchens and bathrooms, even if you are away or otherwise unable to physically check.

What stands out is how the system combines local alerting with remote app alerts. You can also manage what happens when the alarm triggers by using the app, including adjusting the base station alarm volume and muting an alarm if needed. The app also shows alarm history, so you can look back and understand when and how often alerts occurred.

There is also flexibility in how long alerts stay muted, with options to remind you later for 10 minutes, 30 minutes, 2 hours, 6 hours or 12 hours. This can be helpful during short periods of activity such as cleaning or maintenance, when you might expect brief moisture. In addition, the app lets you test the device and receive low battery alerts, so you are not left guessing.

Tech specs

• Type: Wi-Fi water leak detector with base station
• Alarm volume: up to 100 dB
• Waterproof rating: IP67
• Sensor probes: 2 probes on the top and 4 probes on the bottom
• Water detection depth: as shallow as 0.3 mm
• Sensor thickness: 0.7 in (17 mm)
• Wireless range: up to 1,700 ft (500 m) in open areas

Key features

This Wi-Fi water sensor is designed for sensitive leak detection using multiple probes. It has two ultra sensitive water probes on the top and four on the bottom, which helps it sense water that comes in from above as well as water that creeps or collects closer to the lower parts of the sensor. According to the product details, it can detect water as shallow as 0.3 mm deep, which is useful when leaks start small and are easy to miss.

Placement is another strong practical point. The detector is described as ultra slim and easy to place, only 0.7 in (17 mm) thick and 3 in (77 mm) in diameter, so it can fit into tight or awkward spaces. That matters in real homes where you might want to position it near a sink, behind an appliance, or along a wall edge where water would pool if something goes wrong.

You also get a long connection range. The wireless connection range is stated as up to 1,700 ft (500 m) in open areas, which can help if you want coverage in an outbuilding or a far corner without constantly worrying about signal limitations. For humid locations, the IP67 waterproof rating is there to support reliable operation near sources of moisture such as dishwashers or water heaters 🔧.

Battery life is described as up to 3 years, with the ability to replace batteries to extend its lifespan to 5 years. Once installed, that low maintenance approach can be reassuring, particularly for basement or utility areas where you might not want to regularly open or service equipment. A related benefit is that the base station is the part that emits the audible alarm, while the sensor provides the flashing red LED indication.

It is worth noting that if you prefer a setup where both the device and the base station sound during an alarm, the product details suggest considering a different kit. This current model is described such that only the base station will emit the alarm, which is still paired with the LED flash and the app notifications.

What’s included and where it fits

The sensor is designed to detect leaks around the home in practical locations such as windows, bathrooms, kitchens, garages, restrooms, sinks, water pipes, laundry rooms, basements, and even wine cellars 🍷. If you are covering rooms where water damage can escalate quickly, this kind of placement flexibility can make day to day monitoring easier. You can also use the app to view alarm history, which helps you spot patterns if moisture appears repeatedly in the same area.

It makes sense if you want an early warning system that combines local signalling with phone alerts. It suits households that travel, have busy schedules, or simply want an extra layer of confidence when water systems are running. You may want to skip it if you specifically require an alarm that sounds from both the sensor itself and the base station, since this setup is described with audible sound coming from the base station only.

The wireless and IP67 waterproof design also support installation in places that tend to be damp, so you are not limited to dry, visible areas. If you want dependable monitoring in areas like a basement or near a dishwasher, this is the type of configuration that can help you respond faster when water starts where it should not be.