RnCop Galvanized Garden Pegs 50 pack 15 cm
Product description
This pack of garden pegs provides a practical solution for securing landscaping materials quickly and reliably. These 6 inch U-shaped stakes are aimed at anchoring weed membranes, artificial turf and irrigation lines, offering a sturdy hold for outdoor projects while keeping installation straightforward.
Key Points

The pegs have sharpened bevelled ends to make driving into both soft and firmer soils easier and to reduce bending during use. They are galvanised to resist corrosion, which helps them stay serviceable across seasons. A single pick hook is included to remove pegs without damaging fabric or lawn fibres. These features make setup and maintenance less time-consuming for gardeners and small landscaping jobs.


Technical Specifications

- Name: RnCop Galvanized Garden Pegs, 50 Pack 6"/15cm
- Quantity: 50 pegs plus 1 hook.
- Length: 150 mm.
- Width: 30 mm.
- Thickness: 3 mm.
Benefits



These U-shaped steel stakes supply reliable tension and grip, so membranes and turf remain fixed under wind or light foot traffic. Because they are galvanised, they offer improved resistance to rust, which according to the manufacturer extends useful life outdoors. The pointed ends reduce the effort needed to pierce compacted soil and various landscaping fabrics, which speeds up repetitive tasks. For lighter applications such as securing seed mats or hose lines, the slim 3 mm section is effective without being overly intrusive to the substrate. 😊
Usage Recommendations

For best results, position pegs at regular intervals along the edge of the membrane and at overlaps to keep seams flat and secure. When working in very compacted or stony ground, pre-dig a small pilot hole or use the included pick hook to lever pegs out rather than pulling through fabric, which reduces fabric strain. These pegs also serve well for holding down temporary frost covers or seed blankets during establishment; however, consider heavier fixings if expecting prolonged high winds. 🌱
The product may not be the best option for extremely rocky ground where bending could still occur. Also note that while galvanisation improves corrosion resistance, exposure to aggressive chemicals or constant salt spray may require more frequent inspection according to site conditions. 🔧.
Products with discounts that might interest you
- HARDELL Rivet Nut Tool Kit 14" with 80pcs rivet nuts 🛠
- HAUSPROFI 282-piece picture hanger set
- Heable Pack of 2 Monobloc Mixer Tap Connectors 1000mm Silver
- Hojoy 2 Pack Door Draft Excluder 39in
- Patio Door Security Lock 1 — high security locks for French doors 🚪
- Jeboler 2 Pack Hook and Eye Latch 6 Inch Black Cabin Door Hooks (Stainless Steel)
- Jiaweixiang Double Sided Mounting Tape 5.0 m
- KZXXZH Wallpaper Scraper Set 4-piece, 1.5–5in
- Laser 5031 Torx Plus Bit Set 23pc 🛠
- Makita B-65115 Starlock sanding pad (93mm) with Velcro fastening
- Mayouko Magnetic Toolbox Shelf & Tray Set for Workshop
- MULWARK 8pc Mini Screwdriver Set (Magnetic Torx Precision Kit) for Electronics, Watches & Eyeglasses
- De'Longhi Dragon 4 TRD40820T Oil Filled Radiator (White)
- Hyundai Low Noise Electric Air Compressor 8L Oil Free 550W Direct Drive (4CFM, 100psi) Portable
- Sika Sikaflex 291i Marine Sealant and Adhesive (Black) – 300ml Cartridge
- Dremel 660 Router Bit Set (7-piece) for 3.2 mm shank rotary tools
- C.K T4312 Japanese Pry Bar 10 in
- Cable Cover Floor 3 m heavy-duty cable protector
- PICK FOR LIFE Steel Wool Mice Blocker 2 Pack 0000 — rodent blocker 🐭
- SWANLAKE 10-Piece Hook and Pick Set (CR-V steel, with storage pouch)
- Bosch PRO Multi-Material Long Life Diamond Cutting Disc 125 mm (22.23 mm bore) for Concrete & Reinforced Concrete
- Heable Kitchen Mixer Tap dual lever swivel spout 🚰
- Bosch Cross Line Laser Quigo Plus with Tripod
- Klein Tools 32581INS precision insulated screwdriver (2-in-1) with No. 0 Phillips and 1/8-inch slotted bits



