REDTRON DIY Window Screen with Zipper Opening (150cm x 180cm) – Black self-adhesive mesh
Product description
The essentials
If you want insect protection without taking your window fly screen down every time you want fresh air, a zipper opening is the kind of detail that actually matters. This REDTRON DIY window screen uses a fine mesh designed to help keep mosquitoes and other bugs out, while still letting air move through and maintaining an outside view.
On paper, it’s a straightforward “measure, cut, stick” solution: you confirm the window size and installation position, trim the mesh to fit, then apply the self-adhesive hook tape. It’s aimed at people who want something practical for everyday ventilation rather than a complicated installation.
Key features

The standout is the zipped opening design. There’s a 32 cm zipper opening in the netting, made so you can open and close your window more easily without removing the whole screen or lifting the edge. For many households, that’s the difference between a fly screen you’ll use consistently and one that stays half-installed.
It’s also adjustable in the sense that the mesh is cut-to-fit: the roll is 150cm x 180cm, and it’s described as suitable for windows of 150cm x 180cm or smaller. That gives you room to match the shape of your window once you’ve chosen where it will sit.
The mesh is paired with a strong self-adhesive hook tape. The description notes it holds the window netting well, and that if you remove the tape there should be no residue and no damage to your window frame.


What stands out in everyday use

The practical value here is pretty clear: you get a physical barrier that’s meant to keep insects out, while the fine mesh still allows air in and keeps the view unobstructed. That makes it more livable than thicker covers that can feel “blocky” or restrictive.
A quick micro-scenario: imagine you’re making breakfast, the kitchen window is slightly open, and you’re trying to avoid flies or mosquitoes getting in. With a zipped opening in the screen, you can ventilate without having to remove the whole mesh—zip, open your window, then close again once you’re done.
Where it might fall short
It’s a DIY, self-adhesive setup, so it’s not the same as a rigid, permanently framed fly screen. Depending on your window surface and how carefully you align the tape, you may find that the fit needs a bit of patience—especially if your window is an awkward shape.

Also, because the described suitability is for windows of 150cm x 180cm or smaller, it may simply not be the right scale for larger frames. If you’re not within that size band, you’ll have to look for a different approach rather than trying to force a cut that doesn’t really fit.
Should you buy it?


It makes sense if you want insect protection with a ventilation-friendly design, and you’re happy with a cut-to-size project. The 32 cm zipper opening is particularly useful if you regularly open and close the window and don’t want to remove or lift the screen each time.
You may want to skip it if your window is larger than the stated 150cm x 180cm limit, or if you prefer a fully fixed screen system rather than self-adhesive tape. It also might not be your best match if you’re expecting a completely “set and forget” install with no measuring and trimming involved.

If you do buy, double-check your window size and where the screen will be installed before cutting. That small step will save you a lot of hassle.
Mini FAQ
How big is the screen, and can it be cut to fit?
The product is described as a 150cm x 180cm DIY window screen mesh. It can be cut to the desired shape and size after confirming your window size and installation position.

Does it let you open the window without removing the mesh?


Yes. The netting includes a 32 cm zipper opening designed to make it easier to open and close your windows without taking the whole fly screen down or lifting the corner.
Is drilling required to install it?
No drilling is required, according to the installation description. You use the self-adhesive hook tape and a cutting knife to complete the install.

Will removing the adhesive tape leave residue?
The description says that even if you remove the tape, there will be no residue and no damage to the window frame.
What insects is it designed to stop?
It’s described as helping keep mosquitoes and insects out while still allowing fresh air and visibility.
Final verdict
A zipped opening plus self-adhesive DIY mesh is a sensible combo if you want daily ventilation and practical insect protection without a fussy installation. Just be realistic about it being cut-to-fit and tape-based, and make sure your window sits within the 150cm x 180cm (or smaller) sizing guidance before you commit.
Products with discounts that might interest you
- Annickee 10 Pcs Towel Round Radiator Brackets Hooks for All Standard Radiators (Black)
- HOTO Electric Screwdriver 1500mAh
- Lexivon Master LX-144 Hex Bit Socket Set
- InoKraft Portable Sandblaster Gun Kit with Oil-Water Separator & Extension Nozzle (mini sandblaster)
- Ginour 21V Brushless Combi Drill 50Nm
- 8" Glass Suckers Lifters 200 kg heavy-duty suction cups
- Replacement for Dewalt battery 18V 5500mAh
- Kynup Digital Vernier Caliper 150mm
- 5500mAh replacement 18V battery pack
- LEEIKOO Cordless Hammer Drill 21V, 42N.m 2.0Ah
- Thealyn Metal Decorative Garden Fence: 57cm Wide x 45cm High, 5 Panels (2.8m total) for Flower Beds and Path Edges
- MUDEELA Cable Trunking Kit 3.2 m
- NICREW UFO Air Pump 1.7W for 150 L tanks
- POPULO Electric Mouse Sander 130W 14000RPM for Wood 🖱
- 18PCS Allen Key Set 1.5–10mm
- Bargain Hound Claw Hammer 2PCS: 16oz & 8oz Forged Carbon Steel with Non-Slip Grips
- BONTEC Single Monitor Arm 10kg
- ELIVED Tilt TV Wall Bracket for 37-82" TVs 600x400mm
- BIIB 7-in-1 Multi Tool Fidget Pen
- Steel Wool Mice 0000 6 Pack
- SUNLU Silk PLA+ Filament 1.75mm – Light Gold, 1kg spool
- iMeistek Brass Rod 5mm x 100mm (4-Pack) – Straight Round Brass Rods for Lathe, DIY Craft Stock
- Duoduole 30 PCS Aluminum Alloy Rope Tensioners for Camping and Outdoor Use
- eSynic Air Wedge Pump Up Bag Professional 4pcs: Lifting and Alignment Tool with 6 Plastic Wedges

