Price evolution
Product description
This HDMI receiver unit extends Full HD video up to 500ft for multi‑screen displays, useful where a transmitter and separate Ethernet switch are already installed. It handles 1080P@60Hz signals, automatically assigns IP addresses and pairs with the transmitter so screens can be deployed with fewer manual steps. If you need to duplicate a feed across several identical monitors, this receiver supports that setup when combined with the correct network hardware.
Key points
The receiver alone does not include the transmitter or switch, so buyers must supply those components. It cannot operate over a consumer internet connection and needs an independent Ethernet switch to distribute video to multiple receivers. The system supports up to 253 receivers on a dedicated local network, which makes it suitable for signage, control rooms and classroom AV where identical output is required.
Tech specs
- Name: PWAYTEK HDMI Extender Receiver RX Only 500ft
- Format: Full HD 1080P@60Hz
- Connectivity: Ethernet over Cat5e/6
- Compatibility: Requires matching transmitter and independent switch
- Capacity: Supports up to 253 receivers
Getting the most from it
Set the receiver on the same isolated switch as the transmitter to avoid conflicts and reduce latency. A dedicated Ethernet infrastructure keeps the video stream stable, and using Cat6 cabling can improve signal reliability over long runs. Have you checked that your switch supports the required number of ports and traffic? It is worth confirming port capacity and network layout before installation.
What you’ll notice day to day
Once configured the receiver maintains a consistent feed with minimal interaction, and automatic IP assignment speeds up deployment. Expect straightforward pairing with the matching transmitter, though note that the package includes only the receiver so extra devices must be purchased or already available. This unit is practical for fixed installations where identical displays are needed across several locations.







