Oregon 3-Pack Chainsaw Chain 3/8" LP Pitch, .050" Gauge (1.3 mm) – 57 Drive Links, 16" Bar, Low-Kickback Replacement Saw Chain
Product description
What it is
The Oregon 3-Pack Chainsaw Chain is a replacement set designed for saws that run a 3/8" low-profile (LP) pitch with a .050" (1.3 mm) gauge and a 16" (40 cm) bar. Each pack contains three chains, offering convenient stock for routine maintenance or occasional blade changes. The chain is marketed as low-kickback, with a bumper drive link and depth gauge design intended to curb kickback while maintaining cutting performance.
Who it’s for
This chain targets owners of chainsaws with the specified LP 3/8" configuration, particularly those using bars around 16". It’s positioned for DIY users and hobbyists who want a ready replacement set that fits a recognised subset of common models, including Titan, Ryobi, Hawksmoor and Ferrex variants listed in the compatibility notes.
What stands out
On the face of it, the product’s key strengths are its compatibility breadth within the 3/8" LP framework and the emphasis on kickback reduction via the bumper drive link and depth gauge design. Oregon is an established name in saw chains, with a claim of continuing design heritage dating back to 1947 and production in the USA. The kit’s triple-pack offers ongoing value if you routinely replace or stagger blades.
What to consider (limitations)
Be mindful that fit depends on both the chain’s pitch/gauge and the specific model’s requirements. The stated models and compatibility are given as guidelines and the entry repeatedly urges you to verify the fit with your chainsaw manual. If your bar is not 16" or if your chain’s pitch or gauge differs, this kit may not be suitable. While low-kickback is highlighted, actual performance can depend on bar condition, chain tensioning, and correct sharpening.
How to use it (practical tips)
- Confirm your bar length is 16" and that you have a 3/8" LP chain with a .050" gauge and 57 drive links.
- Check that your chainsaw model is within the compatible list or genuinely uses the same chain geometry.
- If replacing, remove tension gradually and fit the new chain ensuring the drive links sit properly in the bar groove.
- Re-tension after a short test cut, a properly tensioned chain runs smoothly with reduced heat and improved control.
- Always consult the manual for safety and maintenance guidance. It’s not a universal fit, so double-check before purchasing.
What you’ll notice in use
If you prioritise dependable replacement chains for an otherwise acceptable saw, you’ll likely appreciate the straightforward geometry of the LP 3/8" chain and the expected steady cutting performance on a 16" bar. On the downside, it’s not a magic upgrade, if your saw’s requirements differ or you push the tool hard in demanding wood, the perceived performance may lag behind higher-spec alternatives.
How it compares to the alternatives
Compared with broader 3/8" LP options, this Oregon kit emphasises compatibility with a defined set of models and a focus on anti-kickback design. If your priority is a straightforward, readily available replacement, this pack makes sense. If you need a chain for a different bar length, pitch, or gauge, or you routinely work in challenging timber, you might prefer a model specifically tailored to those conditions or a larger range of compatibility.
Tech specs
- Name: Oregon 3-Pack Chainsaw Chain
- Type: Low-profile 3/8" LP pitch chain
- Gauge: .050" (1.3 mm)
- Drive links: 57 per chain
- Bar length: 16" (40 cm)
- Pack contents: 3 chains
- Compatibility notes: Fits chainsaws up to 42cc, listed models include Titan TTL758CHN-A, TTB355CHN, TTL632CHN, TTL758CHN, TTL759CHN, TTL760CHN, Black + Decker BECS2040-GB, Parkside PKS 2200, additional Ryobi, Hawksmoor and Ferrex models mentioned
- Key feature: Low-kickback design via bumper drive link and depth gauge
- Origin: Designed and engineered in the USA by Oregon
Is it worth it?
Worth considering if you have a 16" bar and a 3/8" LP pitch saw running a .050" gauge, and your model matches one of the listed compatible series. It offers a ready-made replacement solution in a 3-pack, which can be convenient for maintenance and reducing downtime. Not the best choice if your setup uses a different bar length, pitch, or you need broader compatibility beyond the models stated. Also, always account for correct installation and tensioning to maximise safety and performance.