OKPOW Waterproof Cantilever Parasol Cover (420D Oxford) with Zip, 280 x 81/45 x 30cm

The essentials

If your garden parasol is left out when the weather turns, you’ll know the routine: rinse the frame, brush off grime, then hope the cover didn’t trap moisture. This OKPOW waterproof cantilever parasol cover is built for that exact “leave it outside” scenario. It’s a zip-up cover made from 420D Oxford fabric with a PU coating, designed to help keep an offset/side-mounted parasol dry and cleaner between uses.

On paper, it ticks the common practical boxes: waterproof and UV resistant materials, a windproof tie at the bottom, and a storage bag so it doesn’t become a permanent crumpled extra in the shed. It’s also described as breathable, which is useful because trapped condensation can be a nuisance with some covers.

That said, it’s still a cover: if your parasol isn’t sized correctly, the fit can be awkward, and no cover is completely magical in driving wind or prolonged exposure. So it’s worth taking measurements seriously before you commit.

What it’s for (and why people buy it)

This cover is meant for cantilever garden umbrellas—especially offset umbrellas where the pole isn’t centred like a basic parasol. The protection is intended for outdoor conditions, aiming to keep the fabric from getting soaked, and to reduce sun-related fading and degradation.

A quick example

Imagine it’s a typical UK summer evening, you close up for the night and leave the parasol outside. In the morning, rather than finding the canopy grimy and damp, you’ve usually got a cover that can be hosed down and dried in the sun when you’re ready. The drawstring lock at the bottom also helps stop the cover from ballooning and getting whipped around.

Key points

The standout here is the 420D Oxford fabric with PU coating, paired with a zip closure for easier, more secure fitting. The bottom drawstring is designed to “lock” the cover in place against wind. It’s also labelled as UV resistant, and the manufacturer claims it won’t shrink, fade or deform under normal harsh outdoor exposure.

Practical housekeeping matters too. Instead of complicated cleaning steps, it’s described as easy to clean by hosing down and drying in the sun. And with a storage bag included, you’re less likely to end up with a cover that’s permanently in the wrong place.

Technical details

• Wide compatibility size: 280cm H x 81cm W (middle) / 45cm W (bottom) / 30cm (top)
• Fabric: 420D Oxford fabric (PU coated)
• Waterproof and UV resistant: PU coated Oxford cloth, breathable, lightweight
• Windproof feature: drawstring rope at the bottom to secure the cover
• Closure: zip
• Fit targets mentioned: suitable for 2 to 4 m garden offset cantilever umbrellas

Pros and limits

What you’ll notice day to day

• Zip closure makes it easier to secure than pull-on-only designs.
• Bottom drawstring helps with wind movement, which is often where lighter covers fail.
• The stated materials and coating are aimed at rain and sun exposure, not just light dust protection.
• Cleaning is straightforward: hose it down, then dry it.

A few things to bear in mind

• Coverage is only as good as the fit. If your parasol’s dimensions don’t line up with the stated size profile (280cm tall and the width taper from middle to bottom to top), you may find excess slack or areas that don’t sit snugly.
• In very high winds, any cover can be tested—this one is designed to reduce lift, but you’re still dealing with outdoor forces.
• The description focuses on protection and fit, not insulation—so don’t expect it to behave like a thermal storage solution.

Getting the most from it

It’s a good fit if you want a waterproof, UV-resistant cantilever parasol cover that you can actually live with: zip it on, tighten the bottom drawstring, hose it clean when needed, and store it in the included bag.

It might not suit you if your priority is a near-custom fit for a very specific parasol shape, or if your umbrella’s size sits outside the stated compatibility guidance (2 to 4 m, and the cover’s given height/width profile). Worth considering if your umbrellas are regularly left outdoors between uses and you’re tired of damp covers and fading fabric.

Should you buy it?

Is it worth it?

Choose the OKPOW waterproof cantilever parasol cover if you have a garden offset umbrella in the 2 to 4 m range and you want a zip-up, 420D Oxford (PU coated) cover with a bottom drawstring to help with wind. It’s especially sensible if you’re looking for something practical for everyday weather: protect between uses, clean with a hose, and let it dry in the sun.

You may want to skip it if you’re not confident the cover dimensions match your exact parasol size profile, because fit affects how well it keeps rain out and how securely it stays put. If your umbrella is an unusual shape or you’re between sizes, it’s better to double-check measurements first rather than assume “close enough” will work.

Mini FAQ

Will this cover keep the parasol waterproof?

It’s described as waterproof and UV resistant, using PU-coated Oxford fabric, with a zip closure and a bottom drawstring for a more secure fit.

Does it help in windy weather?

The cover includes a drawstring rope at the bottom intended to lock the cover in place, helping prevent it being blown away.

How do you clean it?

The instructions describe hosing it down with water and drying it in the sun for the next use.

Is it breathable?

It’s stated to be breathable, which can help reduce condensation issues compared with non-breathable covers.

What size parasol is it for?

The compatibility guidance mentions 2.5m, 2.7m, 3m and 4m diameter offset market umbrellas, alongside the cover size profile given in the description.