NICREW UFO Air Pump 1.7W for 150 L tanks
Product description
This compact aquarium aerator brings gentle oxygenation and water movement to tanks up to 150 litres, helping maintain healthier conditions for fish and aquatic plants. The NICREW UFO air pump is especially quiet in operation, making it a discreet option for living rooms, offices or bedside setups while running air stones, curtain bubblers and other air-driven ornaments.
Key Points

Built with an arched housing and a layered noise-reduction design, this air pump combines low energy use with stable airflow. It includes the basic accessories needed to start aerating immediately: airline tubing, a check valve, an adjustable air control valve and an air stone. The unit draws just 1.7 W according to the manufacturer, which keeps running costs low and makes it suitable for continuous use.


Technical Specifications

- Name: NICREW UFO Air Pump
- Power: 1.7 W
- Recommended tank size: up to 150 litres
- Outlet: single outlet
- Included accessories: airline tubing, check valve, air control valve, air stone
Usage Recommendations



Place the pump on a firm surface and use the rubber feet to minimise vibration transfer to cabinets or stands. For best results route the airline tubing so it forms a simple loop above the water line before descending; this reduces the risk of siphoning back into the pump. The adjustable control valve allows you to fine tune bubble output for different accessories and aquarium sizes.
Positive Aspects

The three-layer anti-noise approach, which combines a reinforced shell, an internal noise-dampening chamber and integrated rubber feet, keeps operation whisper-quiet for most home environments. Its single outlet design is straightforward and easy to set up, and the included check valve adds a safety measure against backflow. Note that this model is intended for small to medium tanks and may not provide sufficient airflow for larger or heavily stocked systems. 😊


Technical Details

-
- Noise reduction: reinforced casing, damping chamber and rubber feet
- Suitable for: freshwater and marine aquaria, fountains and hydroponic systems

- Accessories supplied: airline, check valve, flow control valve, air stone
The pump is compact and consumes minimal power, which makes it convenient for continuous ventilation of smaller aquaria. ⚙️ 🐟.
Products with discounts that might interest you
- DOMINOX Propane Torch Head for High Intensity Soldering 🧯
- DUNSOO 500 Pack Black Cable Ties, 200mm x 4.8mm Premium Nylon Zip Ties, Heavy Duty Tie Wraps for Wire Management, Home, Garden, Office and DIY DUNSOO 500 Pack Black Cable Ties, 200mm x 4.8m…
- EINESIN Car Push Retainer Clips assortment set
- Ekunbuy Spring Snap Hooks in 304 stainless steel (M8) heavy-duty rope connector clips
- ELEGOO PLA+ Filament 1.75mm Brown, 1kg spool (High Toughness PLA Plus)
- Firecore FSL230PC 230mm torpedo level with magnet 📏
- GARHWAL 68mm Bi-Metal Hole Saw Set for Wood, Metal & Wall Work
- Greenworks G24HG Cordless Heat Gun (Hot Air Gun) with Fast 9-Second Heat-Up
- Grtard 20-Pack Neodymium Magnets (60 x 10 x 3 mm) with Double-Sided Adhesive Strips
- Hjh Car Tyre Inflator 150 PSI cordless pump
- HollyHOME Retractable Baby Gate 180 cm — Extra wide safety gate 🚪
- Hycline bike floor pump 160 PSI gauge
- LEILUO 32-piece Titanium Multi Tool Blades Kit for Wood, Nails & Drywall
- JelKen 2 Pack Door Lock Bolts (4 inch / 100mm) – 304 Stainless Steel Latch Bolts with Screws
- meite 18 Gauge Stainless Steel Brad Nails (18G/32 mm) – 304 Stainless 2,000-Pack
- Kitmiido Heavy Duty Ladder Hooks (9-piece set) for garage wall storage
- LLPT Duct Tape (6 Packs) – 50mm x 9m Assorted Colour Heavy Duty Gaffer Tape (DT606)
- 2 Pack Labour-Saving Arm Jack (15 inch) hand lifting tool for doors and wooden panels
- TAIHUIMY Screw Hooks for Outdoor String Lights (Q-hanger) with safety buckle – 40 lbs
- LEILUO 55-Piece Multitool Blades Kit (Titanium & Japanese Tooth) for Wood, Nails & Drywall
- YouU 100 pcs Carton Packing Corner Guard Frame Corner Protectors (Black, V-shaped edge guards)
- ELEGOO PLA Pro Filament 1.75mm White 1kg (Easily printable, low-clog PLA) for FDM 3D printers
- HOLACA Upgraded Mount for Starlink Gen 3/2 & Mini – adjustable roof mount bracket
- Kair Ducting Sealing Tape (50mm x 33 Metres) White PVC Duct Tape

