NICEYRIG Removable Counterweight 50g for DJI Ronin S/SC and Zhiyun Gimbals (1/4" Thread)

What it is (and why you might need one)

This NICEYRIG removable counterweight is a 50g balance weight designed to help you get your camera stabiliser setup feeling right. If your gimbal’s balance is off, you can end up fighting the movement instead of just shooting. On paper, this kind of counterweight is all about adjusting the camera’s balance by changing how much mass is on one side and where it sits.

The product is built around simple, practical mechanics: it’s intended to be mounted using a 1/4"-20 screw thread area, so you can secure the weight quickly and remove it when you change configurations. The base description also mentions that you can stack weights (“superpose”/overlap) to fine-tune balance rather than being stuck with a single fixed amount.

Key features that matter in day-to-day use

What stands out here is the approach: quick attachment/removal and the ability to adjust balance incrementally.

Instead of treating weight as a one-and-done decision, this 50g counterweight supports the kind of workflow many shooters end up with—add a weight for a heavier lens setup, remove it for a lighter one, then re-balance when you swap accessories.

A few practical details are worth noting:

• It uses a 1/4"-20 thread format (described as both a 1/4"-20 screw and a 1/4"-20 threaded hole), which is common enough to be useful for mounting solutions.
• It’s made from stainless steel. That usually means better corrosion resistance for storage, especially if you’re using it outdoors or in mixed conditions.
• Weight is 50g, so it’s meant for incremental correction rather than huge shifts.

There is, of course, a limitation: if your gimbal setup needs a much larger change in balance than a single 50g piece can provide, you’ll likely rely on stacking counterweights or using a different size—so this works best as part of a broader balancing kit rather than as the only solution.

Tech specs (as far as the info goes)

• Net weight: 50 g
• Material: stainless steel
• Thread: 1/4"-20

Where it fits in your setup

You’ll see this type of counterweight used when people run heavier camera configurations than the gimbal expects out of the box—think added lens weight, accessories, or a different camera body configuration. The goal is to reduce unwanted drift and help the system sit neutrally.

For a concrete example: imagine you start a shoot with a lighter lens and everything feels stable. Later, you swap to a heavier lens and the camera’s angle wants to pull in one direction when you release it. Adding a 50g counterweight via the 1/4" thread can help bring the balance back toward neutral without permanently altering your rig.

That said, “compatible with DJI Ronin S/Ronin SC and Zhiyun Gimbal” is stated in the product name/overview, but you still should double-check your specific mounting point and thread requirements. Counterweights can be picky about exact attachment style, and the thread alone doesn’t guarantee every mount interface will line up perfectly.

What to check before buying (so it doesn’t disappoint)

Before you order, it’s worth doing a quick reality check:

• Confirm the mounting interface you have uses (or can accept) a 1/4"-20 thread arrangement.
• Consider whether 50g is likely to be enough for your typical build. If your balance changes are often large, this may feel more like a fine-tuning piece.
• Check whether you plan to stack counterweights. The description suggests stacking is possible, but you’ll want to ensure your mounting space and hardware can accommodate multiple weights.

One more thing: fast attachment/removal is mentioned as a benefit, but if your setup requires extra steps to reach the mount point, “quick” will depend a lot on where the counterweight sits on your rig.

Pros

• Stainless steel construction, designed to resist oxidation for storage and outdoor use.
• 50g weight is useful for incremental balance adjustments.
• 1/4"-20 thread approach should suit common mounting methods.
• Removable design means you can re-balance when you change camera/lens/accessories.

Cons

• 50g may be too small if your balance needs a big correction by itself.
• Compatibility is described at a model level, but you still need to verify the exact mounting/thread interface on your particular setup.

Final verdict

It’s a solid buy if you frequently swap lenses or add accessories and you want an easy way to nudge your gimbal’s balance toward neutral using a 50g stainless steel counterweight with a 1/4"-20 thread.

However, it may not be the best choice if you’re dealing with a heavy setup change that requires a much larger mass adjustment than 50g can provide on its own. In that case, you’d be better thinking in terms of stacking or choosing a counterweight that matches your required shift more closely.

Mini FAQ

Is it possible to fine-tune balance by adding multiple counterweights?

The description says counterweights can be superposed/stacked to adjust balance, so the idea is there for fine-tuning rather than forcing one perfect setup.

What thread size does this counterweight use?

It’s described with a 1/4"-20 screw thread and a 1/4"-20 threaded hole for mounting.

Is stainless steel good for storage?

The base info explicitly points out stainless steel helps with stability during storage and resists oxidation, which is a sensible reason to pick it over plain metal in mixed-use scenarios.

Will it definitely fit every DJI Ronin S/SC or Zhiyun configuration?

The product states compatibility with those gimbals, but fitting still depends on your specific mounting point and how your rig accepts a 1/4"-20 threaded counterweight. It’s worth checking the interface before committing.

How should I decide if 50g is enough?

If your balance issues are usually minor—small changes from swapping lenses or adding accessories—50g can be a practical adjustment. If you regularly need a major correction, you may need additional weights or a different size.