NETTA 720 LED Christmas Tree Cluster Lights with 8-Hour Timer, 8 Modes & Warm/Cool White
Product description
Key takeaways
If you want your tree to look “done” without constantly switching things on and off, the NETTA 720 LED Christmas Tree Cluster Lights are built around an automatic timer plus multiple lighting effects. They’re a mains-plug set (not battery) and are designed for both indoor and outdoor use with an IP44 rating.
On paper, this is the kind of festive lighting you buy when you’re aiming for a full, bright cluster look over a fairly long stretch of lit length. The warm and cool white mix also helps if you’re not sure whether you want classic warm tones or a slightly fresher look.
That said, it’s worth keeping expectations realistic: it’s a decorative lighting set with 8 built-in modes, but the effects are still limited to what that single controller and mode list can deliver. If you’re the type who enjoys very specific, custom lighting choreography, you may find it a bit constrained.
What to know before you buy
This set uses a UK plug with a low-voltage adapter (31V) and is rated IP44, which is relevant for anyone planning to position the lights around doors, patios, or other covered outdoor areas. The control is simple: a button on the plug adapter lets you switch modes, and the timer can be activated by holding the power button for 3 seconds until the indicator turns green.
The timer behaviour is fairly specific: once the timer is on, the lights stay on for 8 hours and then turn off for 16 hours automatically. Turn the timer off by holding the power button for 3 seconds again until the indicator turns white. That schedule is handy if you tend to go out at the same times each evening, but it can be a little awkward if your viewing hours vary a lot across the week.
Where it shines (and where it may not)
The standout here is the combination of quantity and coverage intent: 720 bulbs with a stated spacing of 1.25cm between lights. Cluster-style spacing like this is designed to give a fuller festive glow, which can be particularly noticeable on trees where you want the lighting to look even from a normal viewing distance.
You also get 8 different light modes with memory, including Combination, Steady On, Slow Fade, In Waves, Slow Glow, Chasing/Flash, Sequential and Twinkle/Flash. In practical terms, that means you can keep it calm for everyday evenings (steady or slow modes) and switch to something busier when you’ve got guests.
However, there’s a limitation to consider: because the modes are controlled via the plug adapter button, you won’t have the kind of fine-grained control you might expect from more advanced smart lighting systems. If you’re used to app control, scenes, or schedules beyond a simple 8-hour timer window, this will feel more traditional.
Everyday use
A quick scenario: you plug the lights in after dinner, hold the power button for 3 seconds to activate the 8-hour timer (the indicator goes green), then choose your preferred mode. The next day, when it gets dark, the lights come on automatically for 8 hours. That’s especially useful if you want the tree to look ready when you get home, without fiddling every evening.
Installation is also framed as straightforward, with a 5m lead wire to help get the connection from a nearby socket. If you’re hanging them on a tree in a busy living room, that lead length can be the difference between “reachable enough” and “annoying extension dependency”.
Tech specs
- Type: Christmas tree cluster lights (warm white & cool white)
- LED count: 720
- Lit length: 9m
- Bulb spacing: 1.25cm apart
- Lighting modes: 8 (Combination, Steady On, Slow Fade, In Waves, Slow Glow, Chasing/Flash, Sequential, Twinkle/Flash)
- Timer: 8 hours on / 16 hours off
- Timer indicator: turns green when activated, white when deactivated
- Power: mains-powered UK plug with 31V low voltage adapter
- Weather rating: IP44 (indoor & outdoor use)
- Lead wire: 5m
- Warranty: 365-day warranty
Is it worth it?
Worth buying if you want a plug-in Christmas lighting set that’s designed for both indoor and outdoor decoration, and you appreciate an automatic 8-hour timer so the lights aren’t a daily task. It also suits you if you like choice: the 8 modes cover everything from steady glow to more animated effects.
You may want to skip it if you need more than one scheduling style (the timer is fixed at 8 hours on / 16 hours off) or if you’re after highly custom control beyond the modes handled by the plug adapter.
Before you commit, check where you’ll place it: the IP44 rating points towards safe covered outdoor use, but you’ll still want to think about exposure to rain and how close it sits to water sources. Also note the set is mains/low-voltage adapter based, so plan around a suitable nearby socket.
Mini FAQ
Can you use these lights indoors and outdoors?
Yes. The set is mains-powered via a UK plug with a 31V low voltage adapter and is IP44 rated, which is intended for both indoor and outdoor use.
How does the 8-hour timer work?
Activate it by holding the power button for 3 seconds until the indicator turns green. Once set, the lights switch on automatically when it gets dark, stay on for 8 hours, then turn off for 16 hours. Turn it off by holding the button for 3 seconds until the indicator turns white.
What lighting modes are included?
There are 8 modes: Combination, Steady On, Slow Fade, In Waves, Slow Glow, Chasing/Flash, Sequential and Twinkle/Flash.
Are the lights warm white or cool white?
This set is described as warm white and cool white, so it’s aimed at giving you that mixed festive look rather than only one single colour temperature.