Neoteck Neoteck Carrying Case for Auto Ranging Digital Multimeters with DIY Foam (EVA, Nylon & PU)
Product description
What this case is for
If you carry an auto-ranging digital multimeter between rooms, jobs, or your toolbox drawer, a decent case matters. This Neoteck carrying case is built for auto ranging digital multimeters and is designed to help keep your meter protected from bumps, scratches and day-to-day splashes. It also gives you somewhere sensible to stash the accessories that usually end up loose: test leads, batteries and probes.
On paper, the big story here is the removable DIY foam. You’re not locked into a single layout, which can be useful if you’ve got more than one meter model in your kit, or if the foam needs shaping so the device sits snug rather than rattling around.
Key takeaways (before you buy)
The case uses high-density EVA along with nylon and PU, aiming for a crush-resistant, anti-shock and water-resistant build. It’s meant to keep your multimeter in good condition, not to replace a full-on hard flight case. So, if you’re regularly chucking tools around in a van or on a construction site, it may be better to treat it as solid protection for normal transport rather than something that’s indestructible.
It also includes a mesh pocket, which is practical: a secondary compartment for leads and smaller items so you’re not fishing through everything when you need the multimeter quickly.
There’s a bit of a “check before you commit” element, though. Compatibility is described for a list of specific multimeter models, plus “most” other models from well-known tool brands. That’s helpful, but it still means fit can depend on the exact meter shape and how its controls sit.
What stands out in everyday use
The removable foam is the part you’ll likely appreciate most during real use. Because it’s DIY, you can re-shape it into different forms for different multimeters. For example, you could carve out a recess so the meter sits in place with the display facing up, then mould another section to hold the test leads without them dragging across the face.
The mesh pocket is the other genuinely useful touch. Many cases are fine for the main device but awkward for the accessories. Here, the secondary area is built in, so you can keep leads, batteries or a thermo probe from living loose in the same space as the meter.
Materials and protection level
The case is made from high-density EVA, nylon and PU, described as crush resistant, anti-shock and water resistant. That combination is fairly typical for tool accessories: EVA tends to handle impact and knocks better than softer fabric, while nylon/PU help with abrasion and splash resistance.
Just keep expectations realistic. “Water resistant” usually means it should cope with light splashes rather than being confidently waterproof for prolonged exposure. If you work in heavy rain or regularly submerge gear, you may want a more sealed approach.
Size check: make sure the fit makes sense
Exterior size is given as 9 x 5.5 x 3.1 inch, while interior size is 7.8 x 4.5 x 2.5 inch. That means the case should suit many compact digital multimeters, but it’s worth measuring or comparing the overall footprint of your meter.
Who it suits (and who might skip it)
It makes sense if you want a carry case that’s protective enough for everyday transport and you like the flexibility of shaping the foam to match your device.
You may want to skip it if your multimeter is unusually large, oddly shaped around the controls, or you need a guaranteed “snap-in” fit without doing any foam work. Also, if you’re expecting full weatherproofing, you’ll likely feel it comes up short compared to more specialised protective housings.
Pros
- Removable foam lets you DIY the insert shape for different multimeter layouts
- Mesh pocket for leads, batteries and small tools
- Crush resistant, anti-shock, and water resistant materials
Cons (worth noting)
- Fit is described as compatible with multiple models, but it’s not an all-meters guarantee
- Water resistant is likely aimed at splashes, so it may not suit extreme wet conditions
Is it worth it?
This Neoteck carrying case is a strong buy if you’re trying to keep your auto-ranging digital multimeter organised and protected during day-to-day movement, and you don’t mind shaping the foam so the meter sits properly. The combination of EVA/nylon/PU, plus the mesh pocket and DIY insert, covers the sort of problems people usually get with generic pouches.
It’s less compelling if you want a perfect fit with zero adjustment, or if your workflow involves harsh conditions where “water resistant” isn’t enough. In those cases, you might be better off looking for a more purpose-fitted or fully sealed storage solution.
Mini FAQ
Will this case fit my multimeter?
It’s described as compatible with several listed models and also fitting “most” multimeters from a range of brands. Because fit depends on the meter’s shape, it’s worth comparing the interior size (7.8 x 4.5 x 2.5 inch) and considering the foam DIY insert.
Can the foam be customised?
Yes. The foam is removable and can be DIY’d into different shapes, so you can adapt it to how your multimeter sits.
What can I store in the mesh pocket?
The mesh pocket is intended for accessories such as test leads, batteries, a thermo probe and other tools.
Is it waterproof?
The materials are described as water resistant. That suggests splash protection, but it’s safer not to treat it as fully waterproof for heavy or prolonged exposure.
Metres vs pouches: is this better?
If you want more protection from knocks and scratches during transport, a structured case like this usually makes more sense than a simple pouch—especially with the anti-shock EVA and custom foam insert.