Motorbike & Car Underglow Lights 32cm Yellow 5050 18SMD Waterproof LED Strip Set of 4 (12V)

If you like your vehicle to feel a bit more personal, these yellow underglow-style LED strip lights are designed to make a visible difference without turning the install into a project. The strips are thin, aimed at blending into gaps, and come as a 4-pack of 32cm lengths for a fuller look.

That said, it’s not a high-end “show car” system either. This is an entry-friendly way to add an ambient accent around footwells, under-dash areas, or external spots like a front grille—so it’s worth thinking about where you want the light to land before you commit.

At a glance

A set of four 32cm yellow LED strip lights for DC 12V setups, with an IP67 waterproof rating and a flexible, slim build. Over the spot itself, you’re getting an underglow/neon-style accent that’s meant to be fairly discreet once fitted, while still bright enough to change the feel of the space.

You also get a few practical design touches on paper: short circuit protection, a memory function, and the ability to cope with bad weather (useful if the strips will sit where they might get splashed or damp).

Where it shines

The biggest draw here is convenience and “visibility with restraint”. The strips are described as ultra thin and easy to place in small gaps, which matters if you don’t want everything looking bolted-on.

If you’re doing something like: - under-dash or interior footwell accent lighting in a car/van/SUV - exterior underbody ambience (underglow look) where you’d rather not fit bulky hardware - themed additions on a golf cart, camper-van, or even boat/automotive-style projects

…then these strips fit the idea well. The package is also clearly set up for DC 12V power, with a simple wiring approach (red for positive, black for negative).

A small “micro-experience” example: if you’re installing them along the underside of a footwell, you’d typically clean the area, peel the double-sided tape, position the strip along the gap, then route the extra wire underneath to keep it out of sight. On the finished side, the yellow glow should read as an atmospheric accent rather than a glaring light source.

What to know before buying

This product is positioned around simple DC 12V installation, not complicated control. The description mentions a memory function, but it doesn’t describe any remote control, app control, dimming, or colour-changing modes. So if you’re specifically after effects beyond a steady accent, you may feel a bit limited.

Also, the adhesive is doing a lot of the work. The install instructions ask you to clean the area before applying the double-sided tape. If the surface isn’t prepared properly, the lighting could end up looking messy (or not stay put) rather quickly.

One more practical limitation: without seeing the mounting surface and your exact wiring route, you’ll want to plan how you’ll hide the excess wire. The strips have lead wire mentioned as 80cm, but how that works for your vehicle layout will vary.

Pros

• Waterproof rating (IP67) and the claim of UV & water resistance, which helps for exterior or damp conditions.
• Flexible, thin strips that are meant to sit in gaps and look more integrated.
• Set of 4 pieces, which gives you more placement options than a single strip.
• Short circuit protection and a memory function are noted features for day-to-day safety and consistency.
• Straightforward DC 12V wiring with clear polarity (red positive, black negative).

Tech specs

• Name: LED strip lights for underglow/interior accent
• Type: Waterproof flexible LED light strips
• Format: 4 pack of 32cm strips
• Type/technology: 5050 18SMD LED
• Colour: Yellow
• Power: DC 12V
• Current draw: 0.07A @ 12V-DC
• Waterproof rating: IP67
• LED lead wire length: 80cm
• Protection/controls: short circuit protection, memory function
• Installation method: double-sided adhesive tape (clean area first)

Who it’s for (and who should skip it)

It makes sense if you want a practical way to add yellow ambient lighting to a car, van, or similar DC 12V vehicle setup, including under-dash and footwell accents, and you’re happy with a simple, adhesive + wire installation approach.

It might not be a great match if you need smart controls, colour-changing effects, or a more “kit-grade” finish with extensive mounts and brackets—this is more about placing slim strips discreetly than building a full custom system. And if you’re not confident preparing mounting surfaces (cleaning/positioning so the tape holds), you may want to rethink the plan.

In the box & installation notes

You get 4 pack of 32cm car interior light strip yellow. The install guidance is fairly direct: clean the installation area, peel the double-sided tape backing, stick the strips in place, then connect the red wire to the positive pole and the black wire to the negative pole of the DC 12V power supply. The description also suggests hiding excess wire under the footpad to keep things tidy.

Should you buy it?

Buy these Motorbike & Car Underglow Lights if you’re after a simple, yellow LED accent lighting upgrade for DC 12V vehicles—especially for interior under-dash/footwell ambience or underbody-style looks where waterproofing (IP67) is a genuine bonus.

Skip them if you’re expecting advanced control features, significant brightness for bold “statement lighting”, or a no-prep installation where adhesive will magically stick to any surface. As with most strip lighting kits, your results will depend heavily on placement, surface cleaning, and how neatly you manage the wiring.

Mini FAQ

Are these lights suitable for bad weather?

They’re rated IP67 and described as UV & water resistant, so they’re designed to handle wet conditions better than non-rated strips.

Do they work on DC 12V?

Yes—this set is intended for DC 12V power.

Is the installation completely adhesive?

The description points to strong sticky double-sided tape for installation, plus wiring to a DC 12V power supply.

Does it come with a controller or remote?

No controller, remote, or extra control features are mentioned in the information provided—so it’s likely a straightforward setup with the noted memory function.

How many strips do you get?

You get four strips, each 32cm long.