Download app on Google Play


Imagen de MISYNLON OBD Power Cable 3.5M en OfertitasTOP
New offer
Thumbnail principal de MISYNLON OBD Power Cable 3.5M
Thumbnail 1 de MISYNLON OBD Power Cable 3.5M
Thumbnail 2 de MISYNLON OBD Power Cable 3.5M
Thumbnail 3 de MISYNLON OBD Power Cable 3.5M
Thumbnail 4 de MISYNLON OBD Power Cable 3.5M
Thumbnail 5 de MISYNLON OBD Power Cable 3.5M
Thumbnail 6 de MISYNLON OBD Power Cable 3.5M

MISYNLON OBD Power Cable 3.5M

Amazon
Offer expired
Reviews
4,2
+14

Reviews

4,2
+14 reviews
View offer

View offer

Product description

The MISYNLON OBD power cable gives your dash camera, GPS or radar a reliable car power source without hardwiring to fuse boxes. It plugs straight into a vehicle OBD or OBD2 port and provides 12–24V to 5V 3A output via a mini USB connector, so you can keep devices powered for driving and parking monitoring with minimal fuss.

Key features

Detalle de MISYNLON OBD Power Cable 3.5M

This cable supports two working modes selectable by the red switch. In the 24h parking position the cable continues to supply power after the engine is off until the car battery reaches 11.6V, then it will cut power after a five minute delay. In ACC mode the cable supplies power only while the ignition is on and stops about 20 minutes after the engine is switched off according to the manufacturer. The unit contains an intelligent control chip for low voltage protection, which aims to prevent battery drain by stopping output when voltage falls to the 11.6V threshold.

Detalle 1 de MISYNLON OBD Power Cable 3.5M
Detalle 2 de MISYNLON OBD Power Cable 3.5M

Tech specs

Detalle de MISYNLON OBD Power Cable 3.5M
  • Name: MISYNLON OBD Power Cable
  • Type: OBD2 to Mini USB power adapter
  • Voltage: 12-24V to 5V 3A
  • Length: 3.5M
  • Compatibility: dash cam, GPS, radar detector and other mini USB devices

Usage tips

Detalle de MISYNLON OBD Power Cable 3.5M
Detalle 1 de MISYNLON OBD Power Cable 3.5M
Detalle 2 de MISYNLON OBD Power Cable 3.5M

For straightforward installation, plug the adapter into your car's OBD or OBD2 port and route the cable to the device. Note that this unit does not work with electric vehicles, so check the vehicle type before purchase. If you prioritise overnight parking surveillance choose the 24h parking position but be aware of the 11.6V low voltage cutoff which may stop power if the battery is depleted. You’ll like it if you want a simple plug-in power solution without altering the car wiring.

Care & maintenance

Detalle de MISYNLON OBD Power Cable 3.5M

Keep the connector ends clean and inspect the cable routing periodically to avoid snagging. Avoid sharp bends near connectors and disconnect the cable if storing the vehicle for an extended period.

Product details in Markdown