Magnetic Wireless Reversing Camera Kit 7 inch
Product description
Choosing a reversing camera kit is about more than seeing the ground behind you. The Magnetic Wireless Reversing Camera Kit pairs a 7 inch HD 1080P IPS monitor with a rechargeable rear view camera, so you can check what is happening behind the vehicle with clarity in both daylight and darker conditions. It is designed to suit RV, trailer, truck, and camper setups where installation needs to be quick and flexible, not permanent.
With the 7" HD 1080P image and infrared night vision, the screen is built to help you spot obstacles sooner, even when light levels drop. On top of that, the magnetic camera base keeps the fit simple, with an approach that avoids drilling. How much effort you want to put into mounting is a real deciding factor, and this kit is made to keep the barrier to entry low 👍.
Key features
The standout element here is the combination of a 7 inch IPS monitor and a 1080P wide-angle rear view. According to the product details, you get vivid 1080P resolution for day viewing, supported by infrared LEDs for enhanced visibility at night. That means the camera can help you navigate low light conditions rather than leaving you reliant on guesswork.
This kit is also built around convenient power and setup. The rear view camera attaches to metal surfaces using a powerful magnetic base, so you can create a temporary or multi-vehicle setup without drilling or permanent mounting. You also get mounting flexibility, because both suction cup and dash mounts are included for different placement options. Note that magnetic mounting works only on metal surfaces, so it is not compatible with fiberglass, plastic, or non-magnetic materials.
In use, the monitor can be powered via the included 12V cigarette lighter adapter or via a vehicle fuse box, depending on what fits your vehicle setup. There is a built-in 9600mAh rechargeable battery in the camera, which lets you switch the camera on and off directly from the monitor inside the cab. Monitor battery levels are shown in real time on the display, helping you manage charging around your driving schedule. 😊
What stands out day to day is the wireless design and support for multiple display modes. The kit includes loop recording and parking assistance features, including full screen, 2 split screen, and 4 split screen, plus an option to add an extra camera to reduce visual blind areas. Parking lines can be switched on and off, so you can tailor the display to how you prefer to park.
Tech specs
- Display: 7 inch IPS screen
- Resolution: 1080P
- Camera power: 9600mAh rechargeable battery
- Charging: USB-C charging
- Wireless support: 2.4GHz wireless signal
- Transmission range: up to 328 ft in open areas
- Storage: built-in 32GB SD card
What to know
Wireless reversing is often chosen for convenience, but it still needs reliable transmission for everyday use. This kit uses a dual-antenna wireless setup with a 2.4GHz signal, which is intended to keep video smooth with minimal interference, based on the provided information. Range is also specified for real use cases, with an open area range figure of up to 328 ft, and shorter effective and reliable ranges for reversing and driving.
Installation is designed to be very fast. The camera can be attached to any metal surface via the magnetic base, so you avoid drilling and can reposition the unit when you swap vehicles. There are also suction cup and dash mount options, which helps if you are aiming for a specific viewpoint from the cab or dashboard area. Keep in mind that magnetic mounting is limited to metal surfaces only, so check the mounting area before you commit to this approach.
For safer parking and clearer manoeuvring, loop recording and parking assistance are included. The monitor supports display switching for full screen and split screen viewing, and you can enable or disable parking lines depending on what you find most useful. With loop recording, the monitor can record driving conditions, and the video may be used as evidence if necessary, as described in the product information. 🚐
If you plan to use the system across an RV, trailer, truck, or camper, the rechargeable battery and monitor based operation may suit your routine. You can power the camera from the monitor inside the cab, reducing how often you need to charge it. According to the details provided, it charges quickly via USB-C, while the display monitors battery levels in real time.
Who it’s for
It’s a good fit if you want a reversing camera setup that focuses on quick installation and flexible use across multiple vehicles. It makes sense if you regularly tow, move between an RV and a trailer, or need a temporary setup that avoids drilling into your vehicle. It suits you if you want a 7 inch HD 1080P screen with infrared night vision, so visibility stays more consistent in low light conditions.
It might not suit you if your vehicle mounting area is not metal, since the magnetic base is limited to metal surfaces only. You may want to skip it if you need a permanent, fixed camera installation on non-magnetic materials such as fiberglass or plastic. If your priority is reliable reversing support and parking guidance with loop recording features for everyday towing and manoeuvring, this kit matches that use case.